1-Piece Raceway & Accessories

Office Furniture Raceway Right Angle FitRight angle fitting. Used to join sections of office furniture raceway at 90° flat junction. Supplied with adhesive tape, Office Beige.

Category: 1-Piece Non-Metallic Raceway Elbows

Raceway Wall Entrance FittingWall entrance fitting. Allows entry from wall to office furniture raceway run horizontally along partition walls. Fitting includes bend radius protection and trim plate to cover wall opening. Requires minimum wall opening of 4.5in W x 3.0in H (114.3mm x 7

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Raceway One Cubicle Drop Bypass FittingOne cubicle drop bypass fitting. Allows the transition from office furniture raceway run horizontally along partition wall, around existing furniture pole, to office furniture corner raceway mounted vertically in one cubicle at the intersection of partiti

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Raceway Tee FittingTee fitting. Used to create an undivided tee junction between sections of office furniture raceway. Supplied with adhesive tape, Medium Tone.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Base coupler fitting. Used for joining sections of Twin-70 base together. Off White.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Office Furniture Corner Raceway End CapCorner raceway end cap fitting. Opening allows cord passage through fitting such as monitor and keyboard cables. Supplied with adhesive tape, Office Gray.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Raceway Outside Corner FittingOutside corner fitting. Used to join sections of office furniture raceway at outside corner. Supplied with adhesive tape. Medium Tone.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Raceway Coupler FittingCoupler fitting. For use with office furniture raceway, Office Beige.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway Outside CornerOutside corner fitting. Used to join sections of office furniture raceway at outside corner. Supplied with adhesive tape. Office Beige.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Corner Raceway CoverOffice furniture corner raceway cover. Available in 6' lengths.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Corner Raceway CoverOffice furniture corner raceway cover. Available in 6' lengths.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Long Coupler FittingLong coupler fitting (with base). Used to bridge office furniture raceway between panel sections. Can also be used to fill void left by spill-over fitting, when furniture partitions are reconfigured. Supplied with adhesive tape. Medium Tone.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Raceway Desk Mount BoxDesk mount box. Box accepts office furniture snap-on faceplates as well as 70mm NEMA standard screw-on faceplates. Designed for use with OFVR5

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway Spill Over FittingSpill-over fitting. Allows transition from office furniture raceway run horizontally along partition wall to office furniture vertical raceway in one location. Adjustable fitting maintains 1in minimum bend radius of cabling and works with various panel wi

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway Outside CornerOutside corner fitting. Used to join sections of office furniture raceway at outside corner. Supplied with adhesive tape. Office Gray.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Raceway Inside Center FInside corner fitting. Used to join sections of office furniture raceway at inside corner. Supplied with adhesive tape. Office Gray.

Category: 1-Piece Non-Metallic Raceway Elbows

Raceway Two Cubicle Drop Bypass FittingTwo cubicle drop bypass fitting. Allows the transition from office furniture raceway run horizontally along partition wall, around existing furniture pole, to office furniture corner raceway mounted vertically in two cubicles at the intersection of partit

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Raceway Mid Panel Tee FittingMid-panel tee fitting. Used to connect communication pole to office furniture raceway run horizontally along partition wall. Supplied with adhesive tape.Note: not intended for use at intersection of furniture panels. Medium Tone.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Raceway Long Coupler FiLong coupler fitting (with base). Used to bridge office furniture raceway between panel sections. Can also be used to fill void left by spill-over fitting, when furniture partitions are reconfigured. Supplied with adhesive tape. Office Gray.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Raceway One Cubicle Drop FittingOne cubicle drop fitting. Allows the transition from office furniture raceway run horizontally along partition wall to office furniture corner raceway mounted vertically in one cubicle at the intersection of partitions. Fitting maintains 1in minimum bend

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway 4 Way Cross FitCross fitting. Used to join sections of office furniture raceway at four corners. Supplied with adhesive tape, Medium Tone.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Transition fitting from TG to T-45. Provides a tee transition from TG raceway to T-45 and LD series size 5 and 10. Use with RF5X3 reducer fitting to transition to LD series size 3.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Inside corner fitting. Used to join sections of TG raceway at inside corners. Fittings adjust from 85° to 135° to adapt to non-square corners.

Category: 1-Piece Non-Metallic Raceway Elbows

Outside corner fitting – non-adjustable. PVC, White, Used to join sections of TG raceway at inside corners.

Category: 1-Piece Non-Metallic Raceway Elbows