1-Piece Raceway & Accessories

Raceway Tee Fitting, TG-70 Series Raceway, Non-Metallic, Office White

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Outside corner fitting. Used to join sections of TG raceway at outside corners. Fittings adjust from 85° to 135° to adapt to non-square corners.

Category: 1-Piece Non-Metallic Raceway Elbows

End cap fitting. Conduit breakouts of 1/2" for entry into raceway channel. Off White.

Category: 1-Piece Non-Metallic Raceway End Fittings

Reducer fitting for LD raceway from size 10 to size 5. For use with LD5 and LD10 raceway. Off White

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Tee divider insert for TG-70 Raceway

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Reducer fitting for LD raceway from size 10 to size 3. For use with LD3 and LD10 raceway. For in-line terminations, use with CF10

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Replaced by Hubbell PP1ABC7 - Non-Metallic Raceway, Latching PremiseTrak, Base and Cover, 7' Length

Category: 1-Piece Non-Metallic Raceway

Base coupler fitting. Each piece includes two base coupler halves for joining sections of TG-70 base together, 10 pc.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

End cap. Used to terminate or allow entry to TG raceway. Two knockouts each for 0.50" (12.7mm) and 1" (25.4mm) conduit. Electric Ivory.

Category: 1-Piece Non-Metallic Raceway End Fittings

Tee fitting. Used to join sections of Twin-70 raceway at tee intersections, White.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Adapter fits into universal breakout of DCEFX or RAEFX fittings. For use LD5, LDPH5, and LDS5 raceway, Off White, PVC, Length 0.81 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Orange.

Category: 1-Piece Non-Metallic Raceway End Fittings

End cap fitting. Used to terminate or enter cove raceway. Includes breakouts for 1/2" and 3/4" conduit.

Category: 1-Piece Non-Metallic Raceway End Fittings

Outside corner fitting - non-adjustable. Used to join sections of TG raceway at outside corners, Electric Ivory.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Raceway Snap-on VerticaSnap-on single gang vertical sloped communication faceplate. Accepts up to four PANDUIT® Mini-Com® Modules (not included). No additional mounting hardware required. TIA/EIA-606-B compliant..

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

LDS3 / LDPH3 Power Rated Tee Fitting, InTee fitting for use with LDPH3 and LDS3 raceway, International Gray, ABS, Length 2.23 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 45° upward angle from a straight horizontal run. Used with outside vertical 45° angle fitting FOV452X2BL or FOV454X4BL to change level of straight horizontal runs. Cover included.

Category: 1-Piece Non-Metallic Raceway Elbows

Adapter fits into universal breakout of DCEFX or RAEFX fittings. For use LD5, LDPH5, and LDS5 raceway, International Gray, PVC, Length 0.81 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Pre-assembled coupler quickly joins two sections of hinged channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 5/16" nut driver to allow coupler to be removed if necessary, Light Gray.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Attaches to 6x4 channel and/or fittings to create a horizontal four way cross intersection. Accepts optional split cover FRFWCSC6OR.

Category: 1-Piece Non-Metallic Raceway Elbows

Attaches to 2x2 channel to create a 90° vertical drop from a horizontal run. Hinged door included. Accepts channel cover in conjunction with channel. Use QuikLock„¢ Coupler FBC2X2BL with HS2X2BL6 or H2X2BL6 channels. Use snap rivets NR2WH-L or bolts F14PN

Category: 1-Piece Non-Metallic Raceway Elbows

Outside corner fitting for use with LDPH5 and LDS5 raceway, Off White, ABS, Length 1.25 in.

Category: 1-Piece Non-Metallic Raceway Elbows

InfoStream Multi-Channel Raceway Tee Fitting, PVC, Office White

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Entrance end fitting. Conduit breakouts of 1/2", 3/4", 1", 1 1/4" and 1 1/2" for entry from ceiling or wall. Electric Ivory.

Category: 1-Piece Non-Metallic Raceway End Fittings