"wiremold"

3FT POWER STRIP 6IN OC W/RED IG RECEPTICALS

VISTA SMALL CRESTRON PLATE ANODIZED ALUM

FLR BX ACTIVATION W/ BRASS FL ORT

SPEC ELBOW 45 VERT INS 8X8

QUAD PT ASSY20A RECPTGRAY FLBLK

DBL GANG PLATE/2-1.390 OPNGS

FLUSH FITTING 20 AMP DUPLEX GY

CONDUIT END ADAPTER-#2 DUCT

HW SRG 277/480 3 PHS 60KA

SRV FTG 1 TELE OPNG 1IN 0 SER

12ft8in 2chan Alum 2 20arec Com Cvr

12IN W 3-1/4IN D 6FT L TRENCH DUCT BODY AND COVER ASSY

DRIVE PLUG

5745 COMB SWITCH&

Passes DS4000 Series Raceway over previously installed conduit or raceways as large as 2400 Series Raceway. Also creates transition ot 500, 700 or 2400D Series Raceway from DS4000 Series Raceway. Designer Ivory

PORC KEYLESS SOCKET

WIR CM2-U2TJ-BK CM2 MODULE FOR

W-mold C110-4eb Blank Ends

P-THRU ASSY FLUSH 4INP-thru Assy Flush 4in Furn Feed-brs

FLR PLT GASKET FOR 825C

WIR 511 511 2-IN 90D FLAT

8IN CORE-PREWIRED-For tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. Includes one (1) 8TS Tile Shim. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No device plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider, One (1) 8TS Tile Shim. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Black

WMD 6ATC2PBS-25 6IN PREWIRED

WAL S39CCTCBK CVR ASSY