"terminal blocks"

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs.

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

Socket, Harmony, for RPM3 Power Relays, 16A Screw Clamp Terminals, Mixed Contact, 11 Blade

Category: 11-Blade Mounting Sockets

MAR 1411300 3CKT POWER BLOCK

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Fuse, 3 Amp, Class CC, Time-Delay, Rejection, 13/32 Inch x 1-1/2 Inch, 600 Volt, Ferrule Terminal, Cartridge, 200,000 Amp (Symmetrical) Interrupting Capacity, CC-TRON

Category: Class CC Fuses

Fuseholder, Panel Mount, Midget Size, 30 Amp, 600 Volt AC, Straight Terminals, 1-13/32 - 1-1/2 Inch Fuse Length

Category: Panel Mount Fuse Holders

Cu Comp Terminal Flex Cond, 2 Hole/W/InspWindow, 2/0 Weld,2/0(325/#24)DLO Flex, 1/0 AWG Code, 600 V-35 kV, 1/4" Stud, 0.62" Spacing, Lng bbl, Black, 13 Index.

Category: 2-Hole Copper Compression Lugs

Pop-Up Floor Box with 15 Amp, 125 Volt, NEMA: 5-15R, Pole: 2, 3-Wire, Tamper-Resistant, Decora, Duplex Receptacle/Outlet (Pre-Wired to Terminal Block), Black

Category: Assembled Recessed Gang Boxes

Ground Bar Kit, 21 Terminal, (1) 2/0 Lug, Length: 9.19 inches (233.4 mm). Used with BR and CH Series Loadcenters.

Category: Load Center Neutral & Ground Bars

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Copper, Tin Plated, For Code Copper Conductors, 250 MCM, 1/4 Inch Bolt Hole, Coded Yellow, Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 1-Hole Copper Compression Lugs

Lug Connector, Copper, Unplated, 14 Sol. - 4 Str., 1.28 in Length, .50 in Width

Category: 1-Conductor Copper Mechanical Lugs

Protective Cover For Power Block, 3-pole, Clear With Write-on Surface For Fieldtermination Identification

Category: Non-Insulated Connector Block Covers

Terminal Strip, 2-Pole, Electrical Barrier, 300 Volt AC/DC

Category: Terminal Block Blank Marking Cards

Ring Terminal, Nylon Insulated, 6 AWG, #10 Stud Size, Material: Copper

Category: Nylon Insulated Ring Tongues

Auxiliary contact block, TeSys K, 3NO+1NC, front mounting, screw clamp terminals

Category: Pilot Device Pushbutton Boots

RC55, Horizontal Mount, (10) Marking Cards, Legend: 21 - 30. For use with 5 mm Terminal Blocks.

Category: Terminal Block Horizontal Marking Cards

BLZP 5.08/02/180 SN OR BX

8 Pin Octal Base Socket 10 Amp @ 600V AC Pressure Clamp Terminals

Category: 8-Pin Mounting Sockets

100-C IEC Contactor, 400-415 Volt AC 50 Hz, Screw Terminals, Line Side, 9 Amp, 1 Normally Open Auxiliary Contact

Category: IEC Contactors - 0-16 Amp

END COVER FOR MINI SCREW TERMINALS

Category: Terminal Block End Sections

Compression Lug, Straight, Long Barrel, 1-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 14 - 10 AWG, 1/4 Inch Bolt Hole, With Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 1-Hole Long Barrel Copper Compression Lugs

SCREW TERMINAL 2 LEVEL 4PTS 2 5MMGREY

BUR YAD8CM6E14 8STR FLX 1/4

Category: 1-Hole Copper Compression Lugs

Fork Terminal, 18- 14 AWG, #6 stud size, bulk package.

Category: Non-Insulated Standard Fork Terminals

Connection Products,1492-MR5X8 Marker Card,Repeat Sequence Printing,Horizontal Text,141-160 Blocks of 20

Category: Terminal Block Horizontal Marking Cards