"wiremold"

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

W-mold Wsc42-6 6 Gand Box W/d ividers

Category: Work Surface Power Centers

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Black

Category: Assembled Poke-Through Units

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters and adapter to accept AVIP or Extron Electronics MAAP devices. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

WIREMOLD ALA-ABRT

Category: Large 2-Piece Metallic Raceway Cover Plates

Non-Metallic, Device Bracket, 40N2 / 60N2 Series. Size: 5-1/4" Length, 2-3/16" Width. For use with Ortronics TracJack Individual Jack System, Ortronics Series II Front-Loading Module System, and Wiremold Open System Communications Modules. Color: Ivory.

Category: 2-Piece Non-Metallic Raceway Covers

The new Wiremold Metal Raceway Laser Level simplifies and streamlines the process of installing 500 and 700 Series Raceway. The Laser Level provides perfect visual alignment for runs of metal raceway. Speed up your raceway installation projects and get off the job faster with the new Metal Raceway Laser Level. Finish - Red

Category: Laser Levels

Assembled unit. Prewired 20A duplex receptacle can be wired as a standard duplex receptacle or isolated ground. Finished with a brushed brass flange and a black device plate. Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes two Ortronics TracJack adapters and two Ortronics Series II adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Brass

Category: Assembled Poke-Through Units

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters and adapter to accept AVIP or Extron Electronics MAAP devices. Modular jacks and A/V connectors sold separately. Activation Cover 1dp 4comm - All Aluminum

Category: Round Recessed Box Covers

Assembled unit. Prewired 20A duplex receptacle can be wired as a standard duplex receptacle or isolated ground. Flange available in painted gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Slide covers match the painted flange colors: gray, black, and ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes two Ortronics TracJack adapters and two Ortronics Series II adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

Kit comes complete with adapter ring to secure into the boxes, Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

Rectangular Flange, 3-Gang, Brass

Category: Square / Rectangle Recessed Box Flanges

3' [914mm] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with two (2) duplex mounting plates, two (2) communication mounting plates (RFB62A), and (2) blank mounting plates. Other plates sold separately.

Category: Recessed Adjustable Floor Boxes

6' Plugmold Multioutlet System with 6 single outlets. 304 Stainless Steel

Category: Single Circuit Steel Plugmold

Accepts up to three (3) dual Wiremold Open System communication adapters. Adapters sold separately. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters and adapter to accept AVIP or Extron Electronics MAAP devices. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

4-Compartment Combination Box, Metallic, Depth: 3-7/16", Length: 12-3/4", Width: 10". Includes: (2) Receptacle Brackets. For use in Concrete Floor Applications. Floor cover is not included with box and needs to be purchased separately.

Category: Recessed Compartment Boxes

Non-Metallic, Base, 5000 Series. Size: 8' Length, 5" Width. PVC.

Category: 2-Piece Non-Metallic Raceway

Poke-Thru Device Cover, Series: RC4, Nonmetallic, Cover Type: Flush, Slide, Material/Finish: Polycarbonate/Black Cover w/ Aluminum Painted Flange. Diameter: 8-1/4", For Use on Tile, Wood, Laminate, or Carpet Flooring.

Category: Poke-Through Cover Assemblies

4-1/4" Round Cover, Metallic, Diameter, (2) 1-1/2 Inch Screw Plugs, Furnished With Gaskets and (3) Screws, Color: Brass

Category: Round Recessed Box Covers

Brass Tile Fl 3-gang Ombx Series

Category: Square / Rectangle Recessed Box Flanges

Internal Duplex Receptacle Bracket, Accepts 15A & 20A Duplex Receptacles

Category: Recessed Floor Box Service Fittings

Mini Adapter Cover Plate, For ALA3800 Series, Material: Aluminum, Length: 12 Inches, Accepts One (1) Wiremold CM2 Series Communication Connectivity Device. Includes Cover and 2A Mini Adapter, (2A-Opening).

Category: Large 2-Piece Metallic Raceway Cover Plates