"wiremold"

Double Gang Plate, Use in center compartment only. Includes one Activate adapter.

Category: Recessed Compartment Box Device Plates

WIREMOLD PSRC9AMDTCGY

Category: 3-Gang Raceway Device Boxes

Aluminum, Base, ALA3800 Series. Size: 10' Length, 3" Height, 2-1/4" Width. Satin Anodized Finish. Package Quantity: 4.

Category: Large 2-Piece Metallic Raceway Bases

Poke-Thru Assembly, Flush Furniture Feed, 4" Round, BlackPoke-Thru Assembly, Flush Furniture Feed, 4 Inch Round, Complete With One-Piece Finish Flange And Conduit Assembly with (1) 3/4 Inch and (1) 1-1/4 Inch Screw Plug Opening,Color: Black, For Use On tile/Carpet Floors

Category: Assembled Poke-Through Units

Non-Metallic, FiberReady 2" Radius Full Capacity Internal Elbow, 5400 Series. Size: 4" Diameter. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

Non-Metallic, End Plate. Includes: (2) Outlet Identification Labels. White.

Category: Communication Module End Plates For Metallic Raceway

Closes off open ends of raceway.

Category: Large 2-Piece Metallic Raceway End Fittings

Non-Metallic, Twin Snap Wire Clip, 5400 Series. Size: 2-5/8" Length. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

<p>Faceplate with 6a mini adapter for Wiremold Open System CM2 communication modules.</p>

Category: Recessed Floor Box Service Fittings

Floor Box Assembly, Round, Type: (4) UTP Connectors, Diameter: 4 Inch, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Aluminum, Includes: (2) Wiremold Open System Adapters, (2) Ortronics TracJack Adapters, and (2) Ortronics Series II Adpaters, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

For AC8850 Box. Includes one (1) Wiremold CM Series Open System adapter. NOTE: AC8850 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway

Unit is 18 3/32" [461.2 mm] and has one 15A gray duplex and two communication openings with adapter for Ortronics TracJack & Series II or Wiremold open system. NOTE: Accommodates surface thicknesses from 0.7" to 1.9" [18mm to 48mm].

Category: Work Surface Power Centers

Accepts three (3) Wiremold Open System inserts or three (3) CM2 Series Open System modules.

Category: Recessed Floor Box Service Fittings

Wmdm5bz Wiremold 5 Outlet computer Grade Surge

Category: Commercial Grade Power Strips

Communication Bracket. For Activate (DTB-2-2AB) or Ortronics (DTB-2-2RT) devices. Ortronics and Activate adapters included. For use with: RFB4 Series Compartment Type Boxes.

Category: Recessed Floor Box Service Fittings

Multi-Service Assembled Poke-Thru Device Communication Adapter, For (2) 1/2 Inch Conduit Connectors, Non-Metallic

Category: Poke-Through Mounting Plates

Steel, Ground Clamp, 2000 Series. Size: 1-7/32".

Category: Small 2-Piece Metallic Raceway Grounding Clamps

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Poke-Through Cover Assemblies

One 2A size Pass and Seymour Activate adapter included. Wiremold CM Series Open System inserts sold separately. NOTE: For RFB4-4DB Series Floor Boxes only. For use on tile, terrazzo, carpet, or wood covered floors. Additional configurations available. Please consult your local Sales Representative for more information.

Category: Recessed Floor Box Service Fittings

Unit includes one (1) 20A black tamper-resistant duplex receptacle. Second opening will accept adapter for one (1) Wiremold CM Series Open System 2A module, one (1) Ortronics Series II or one (1) TracJack adapter to accommodate a wide range of communication outlets. Adapters are included in hardware bag. Unit comes with a 6' [1.83m] cord. Comes with a black powder coat finish.

Category: Assembled Recessed Countertop Boxes

Duplex receptacle cover accepts one (1) Wiremold CM2 Series and 2A mini adapter (2A opening).

Category: Large 2-Piece Metallic Raceway Cover Plates

A/V device includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

All communication floor boxes accept up to four UTP connectors. Flush poke-thru-style flanges available. Slide covers match painted flange colors. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass-color slide holder. Die-cast aluminum construction with three 1/2" trade size knockouts: two on the sides and one on the bottom. 18 cu. in. (295 cu. cm.) capacity. Requires a 4" (102mm) diameter hole and overall floor depth of 1" (25mm). Includes two (2) Ortronics TracJack inserts, two (2) Ortronics Series II adapters and two Wiremold Open System adapters. Assembled with scrub water gasket. For use on tile, wood, or carpet floors. Modular jacks sold separately. Black

Category: Assembled Recessed Round Boxes

6A opening with communication adapter on one side. Accommodates Wiremold Open System communication modules. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cu. in. (442ml) of capacity.

Category: Recessed Floor Box Service Fittings