"wiremold"

Non-Metallic, 2A, Blank Module. Black.

Category: Blank Communication Modules For Metallic Raceway

Back Feed Fitting, For Series 3000 Two-Piece Surface Raceway, 1-1/4, 1-1/2, & 2 In Knockouts, Steel, Ivory

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

WMD 4STC 4IN STEM ASSEMBLY

Category: Assembled Poke-Through Units

For right angle turns on the same surface. Integral dividers provide 2" (51mm) cable bend raduis for UTP and fiber optic installations. Ideal for lay-in or pull-through installations. White

Category: 2-Piece Non-Metallic Raceway Elbows

WMD EFB45-CTR

Category: Square / Rectangle Recessed Box Flanges

For branches at right angles. Provides 2" (51mm) cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. Ivory

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Makes 90 degree internal corners. Two AL2401 Couplings included.

Category: Small 2-Piece Metallic Raceway Elbows

Floor Box Cover Kit, Includes Flange and Slide Holder, (1) Pre-Wired 20A Duplex Receptacle, Brass

Category: Round Recessed Box Covers

Combination Carpet and Tile Flange, 2-Gang, Powder-Coated Aluminum, Nickel

Category: Square / Rectangle Recessed Box Flanges

Required to fill unused openings. White

Category: Blank Communication Modules For Metallic Raceway

Complete cover and stem assembly with combination 1 1/4" and 2" trade size threaded conduit openings and closure plugs. Finished color black

Category: Assembled Poke-Through Units

Extruded .050" (1.8mm) thick aluminum. Packed eight 5' (1.5m) lengths per carton.

Category: Large 2-Piece Metallic Raceway Dividers

.040" [1.0mm] Steel, 5' [1.5m] Lengths. Packed Ten 5' [1.5m] Lengths Of Base And cover Per Carton.

Category: Small 2-Piece Metallic Raceway Bases

WIREMOLD PA120T SENTREX SURGE

Category: Panel Mount Surge Protection Devices

WIREMOLD RFB11-OG LRG CAPACITY ONGRADE FLOOR BOX 6IN

Category: 1-Gang Raceway Device Brackets & Plates

MLX MUS-X230-WD5 CUST WIREMOLD IVRY FASCIA FITS CM2 2 KSJ

FLUSH TYPE EXT ADAPTER 2 GANG

For 881 PVC Floor Box. Kit complete with flange, slide holder, 881 adapter, (1) one Wiremold Open System unloaded adapter, Ortronics Series II and TracJack adapters. Holds up to eight (8) ports of communication devices. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm). Not for use when concrete is the finished floor. Use only for tile, carpet and wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Black

WIREMOLD APCB1TM4 CONTROL BOX WITH PADDLE DIMMER

For 881PVC Floor Box. Kit complete with two (2) 20A duplex receptacles, (receptacles can be wired as standard or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Brass

For 881 PVC Floor Box. Kit complete with one (1) 20A duplex 881AV3CTCBS receptacle, (receptacle can be wired as standard receptacle or isolated ground), flange and slide holder, 881ADP Adapter and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapter, Ortronics® Series II and TracJack adapters and Extron® Electronics MAAP adapter. CAUTION: Not for use on concrete pours less than 4 1/2" [114mm]. Not for use when concrete is the finished floor. Use only for tile, carpet and

GFCI PLUGMOLD 6FT IVORY

WMD XB814C520BN EXTERIOR BX C

For branch raceway at right angles. Provides 2" (51mm) cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. Fog White