"wiremold"

Device plate that will accept up to four (4) ports of communications devices. Includes adapters for Ortronics TracJack, Series II, Pass and Seymour Activate inserts and Wiremold Open System communication modules.

Category: Metallic Overfloor Raceway Device Plates

Internal Bracket, Type: GFI Receptacle, Metallic, Communication or Audio/Video Devices, For RFB4 Only.

Category: Recessed Floor Box Service Fittings

Floor Box Cover, 1-Gang, Non-Metallic, Cover Type: Non-Metallic GFI. Device Type: Decorator/GFCI Receptacle. brown.

Category: Square / Rectangle Recessed Box Covers

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Black. Outlets (6") O/C: Total Outlets: (6) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Internal Communication Bracket, (2) Adapters, Aluminum, For RFB2 Series

Category: Recessed Floor Box Service Fittings

2-Gang, Floor Box, Depth: 3-7/16 Inch, (6) 1 Inch Conduit Openings, Cubic Inches: 94, Cast Iron

Category: Recessed Compartment Boxes

1-Gang, Floor Box Cover, Non-Metallic, Cover Type: Dual Service. Device Type: Communication Cable. Color: Brass.

Category: Square / Rectangle Recessed Box Covers

Brushed aluminum GFI cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). May be used with Wiremold CM Series adapters and Ortronics Connectivity Systems in conjunction with 817B, 827B, and 837B Flanges. Made in USA. Nickel

Category: Square / Rectangle Recessed Box Covers

For 881 PVC Floor Box. Kit complete with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Black

Category: Round Recessed Box Covers

Non-Metallic, 1-Gang, Shallow Device Box, 2300 Series. Size: 4-3/4" Length, 3" Width, 7/8" Depth. PVC, White.

Category: 1-Gang Raceway Device Boxes

Service Box Plate, Metallic, Type: Duplex Receptacle Opening (One Side)

Category: Recessed Floor Box Service Fittings

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft., Outlets (6") O/C: Total Outlets: (6) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Ivory 700 Series raceway from Wiremold is ideal for surface mounting small amounts of electrical wiring or communication cables. These rugged raceways offer a low profile appearance which blend with any decor. Available in our exclusive ScuffCoat finish in 5 foot lengths. Finish - Ivory

Category: 1-Piece Metallic Raceway

Device Mounting Plate, Type: Blank, Metallic, Used to Blank Off Either of the Side Compartments When No Devices or Cabling Are To Be Used.

Category: Poke-Through Mounting Plates

Duplex Cover Plate with Flip Lid, Size: 4-1/4 Inch, Aluminum

Category: Round Recessed Box Covers

Rectangular Floor Box Cover, 1-Gang, Type; Single Receptacle, Flip-Lid, Brass

Category: Square / Rectangle Recessed Box Covers

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Black with Black Flange. Diameter: 7-1/2 Inch. Depth: 9 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Ortronics TracJack Mounting Bezel & (2) Ortronics Series II Communication Housing (Devices Sold Separately). For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Cover Cutter for 4000 & 6000 Series Raceway Cover.

Category: Raceway Tools

Round, Adjustable Floor Box, Steel, Depth: 2-3/4 Inch, Cubic Inches: 39 Inch, Knockouts: Sides: (1)-1/2 x (1) 3/4 & (1) 3/4 x (1) 1 Inch, Bottom: (2) 1/2 Inch & (2) 3/4 Inch, Adjustments: 1-3/4 Inch (Before Pour) or 1/2 Inch (After Pour)

Category: Recessed Adjustable Floor Boxes

Poke-Thru Device, Flush, Assembled Unit, RC4 Series, Non-Metallic Cover, Color: Gray. Diameter: 8-1/4 Inch. Depth: 9-1/16 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (1) Ortronics TracJack Mounting Bezel & (1) Ortronics Series I. For Use with Carpet, Wood or Tile Flooring

Category: Assembled Poke-Through Units

Cover Plate Flange, 1-Gang, OmniBox Series, Metallic, Cover Type: Flip, Color: Aluminum, WxL: 3-5/16 Inch x 4-5/16 Inch, Accepts: GFI, Duplex, For Use with Carpet, Wood, and Tile Flooring.

Category: Square / Rectangle Recessed Box Covers

Duplex Receptacle Faceplate, Tele-Power Pole Series, Ivory, For 15 and 20 Amp Duplex Receptacles - G3007C Device Backet Included

Category: Power Pole Covers

Steel, FiberReady 2" Radius Full Capacity Flat Elbow, 4000 Series. Size: 8-3/4" Length, 1-3/4" Width. Ivory.

Category: Large 2-Piece Metallic Raceway Elbows

4-1/4" Round Cover, Metallic, Cover Type: single door. Device Type: Duplex Receptacle. Color: Brushed Aluminum. For use in Carpet Applications.

Category: Round Recessed Box Covers