"wiremold"

This blank plate accepts three (3) Ortronics TracJack inserts. Finish - Galvanized Steel

Category: Recessed Floor Box Service Fittings

4IN EVO SINGLE 1-9/16IN REC DEVICE

Category: Recessed Floor Box Service Fittings

WMD RFPCRUAUC-NI ROUND FPC, 1

Category: Work Surface Power Centers

WMD 686039100FT

Category: Grommet Edging

WMD RFBAS1 RFBA 1.39 IN SINGL

Category: Recessed Compartment Box Device Plates

Steel, Prewired Plugmold, Length: 6 ft. Color: Black. Outlets (6") O/C: Total Outlets: (12) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Steel Plugmold

Non-Metallic, External Elbow, 2900 Series. Size: 1-7/8" Length. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Elbows

Non-Metallic, 90° External Elbow, 2300 Series. Size: 2-1/2" Length. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

Rectangular Device Cover for Tele-Power Pole, Accommodates Sentrex Surge Receptacle, GFCI and Other Decorator Style Devices - G3007C Device Bracket Included. Ivory Finish

Category: Power Pole Covers

Steel, 7.5" Precut Cover, 3000 Series. Ivory.

Category: Small 2-Piece Metallic Raceway Covers

Twelve 20a Outlets With T-Slots, 6' [1.8m] Cord. Length 77" [2m]. Receptacle Center-to-Center 6" [152mm]. 20 Amp Unit With A 20 Amp Resettable Circuit Breaker

Category: Commercial Grade Power Strips

This box has a 5" (127mm) depth design with an extra 2" (51mm) of width for additional wiring capacity and can accommodate four duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept at least three communication adapters for up to 18 ports of activation. Lids rotate 180° for easy orientation. Gray lids are diecast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Assembled Recessed Gang Boxes

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Nickel

Category: Square / Rectangle Recessed Box Covers

Installs of duplex devices in divided aluminum raceway. 6" (152mm) offset divider included. Can also be used with 106 communication frames.

Category: Plugmold Covers

Four-piece power service fitting. Duplex opening both sides. Receptacles not included. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Includes round PVC floor box, one 15A, 125V tamper-resistant decorator style duplex receptacle, one coax F connector, one RJ45 Category 5e connector, and brass duplex opening cover plate with single flip lid.

Category: Assembled Recessed Round Boxes

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. No device plates are included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors.

Category: Assembled Poke-Through Units

W-mold Amdtp-a 20a125v Pwrdis t Pole

Category: Power Pole Covers

For 15A and 20A decorator receptacles.

Category: Large 2-Piece Metallic Raceway Cover Plates

Has one 3/4" and one 3/4"/1 1/4" concentric trade size knockout.

Category: Recessed Floor Box Service Fittings

Wmd Alds4010a Alds4000 Entran

Category: Large 2-Piece Metallic Raceway End Fittings

<p>Single duplex opening faceplate.</p>

Category: Recessed Floor Box Service Fittings

For mounting one or two keystone device modules. Has one opening and one KO. Gray

Category: 1-Gang Raceway Box Covers & Faceplates

W-mold G20-c2 Cord-ended Plug mold

Category: Single Circuit Steel Plugmold