"wiremold"

4-1/4" Round Cover, Metallic, Cover Type: single door. Device Type: Duplex Receptacle. Color: Brushed Aluminum. For use in Carpet Applications.

Category: Round Recessed Box Covers

For 881PVC Floor Box. Kit complete with two (2) 20A duplex receptacles, (receptacles can be wired as standard or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Black

Category: Round Recessed Box Covers

Reducing Connector Fitting, For Transitioning From 800 Series Raceway To 400 Series Raceway. Ivory

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

OFR Extron MAAP-2A Combo Device Plate, Steel. Combination Device Plate That Will Accept Up To Two (2) Extron Electronics MAAP-Style Plates and Up To Two (2) Ports of Communications Devices. Includes Adapters For Ortronics Tracjack, Series II, Pass and Seymour Activate Inserts and Wiremold Open System Communication Modules.

Category: Metallic Overfloor Raceway Device Plates

Single Gang Two-Piece Snap Together Outlet Box with Adhesive Backing, Off-White, Accepts Pan-Way Screw-On Faceplates or NEMA Standard Single Gang Faceplate, Use with Pan-Way T-45 or LD Profile Raceways. Length: 5 Inch, Width: 3.26 Inch, Height: 1.62 Inch.

Category: 1-Gang Raceway Device Boxes

Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Flanges available painted in gray (GY), black (BK), ivory (VY). Flanges also available in plated brushed brass (BS) and brushed aluminum (AL). Slide covers match the painted flange colors, gray, black, ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum color slide holder (AA). Includes Wiremold Open System unloaded inserts. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC7 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC7 Assembled Unit-Aluminum Finish Flange Black Slide Holder, 20A Duplex Standard or IG and Cat 6 Connectors

Category: Assembled Poke-Through Units

Steel, 1-Piece Raceway, 500 Series, Size: 17/32" Height, 3/4" Width, 10' Length, Includes (1) Coupling, Ivory

Category: 1-Piece Metallic Raceway

Steel, Entrance End Fitting, 2000 Series. Size: 3" Length, 1-1/2" Height, 1-9/32" Width. White.

Category: Plugmold End Fittings

PRODUCE SCALE TWO-PIECE TELEPOWER POLE SILVER - Customer Special

Category: Steel Power Poles

Steel, 1-Piece Raceway, 700 Series. Size: 17/32" Height, 3/4" Width, 10' Length. Includes: (1) Coupling. White.

Category: 1-Piece Metallic Raceway

Steel, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: White. Outlets (6") O/C: Total Outlets: (8) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: White. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

4000 Series Raceway Steel Cover, Gray, 5' (Also Compatible with 6000 Base)

Category: Large 2-Piece Metallic Raceway Covers

Steel, Two Channel Power/Data Pole. 2-1/4" X 2-5/16", 10'5" High. (2) Spec Duplex Outlets, 20A, 125V. Removable Cover with KO's for Data Connectors. Color: Ivory.

Category: Steel Power Poles

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Black. Diameter: 8-1/4". Depth: 9-1/16". Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (1) Ortronics TracJack Mounting Bezel & (1) Ortronics Series I, 4 Outlets and Provisions for 4 Data Jacks, Fits 4" Cored Hole

Category: Assembled Poke-Through Units

2-Gang, Cover Plate Flange, Non-Metallic, Color: Black. WxL: 8-7/8" x 5-3/4". For use with: 829PFLRT, 829PFL Covers and Accepts MAB6TJ, MAB3S2, CM-MAB and CM Series Inserts in Carpet and Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

Closes off open end of 4000 Series Raceway. Has two 1/2" trade size KOs to facilitate end feeding. Gray

Category: Large 2-Piece Metallic Raceway End Fittings

Duplex Device Plate, Pre-Galvanized GS

Category: Recessed Compartment Box Covers

4 Furniture Feed Poke-Thru Device, Flush Mount, Diameter: 4 Inch, (1) 1-1/2 Inch Screw Plug and (1) 3/4 Inch Screw Plug, Non-Metallic Cover, Black

Category: Assembled Poke-Through Units

POWER STRIP WITH 6FT CORD & SB CORD CAP

Category: General Duty Power Strips

Steel, Fixture Box with Solid Base, 500, 700 Series. Size: 5-1/2" Diameter, 1" Height. Includes: (6) Mounting Holes, (4) 1/2" Trade Size KOs, #10 Mounting Screws. Ivory.

Category: Round Raceway Solid Base Boxes

Steel, Supporting Clip, 500, 700 Series. Size: 2-1/2". White.

Category: Metallic Raceway Clips & Couplings

Steel, 1-Gang, Device Box, 500, 700 Series. Size: 1-3/4" Depth. White.

Category: 1-Gang Raceway Device Boxes

2-Gang, Cover Plate Flange, Metallic, Color: Brass. WxL: 9.185" x 6.080". Accepts MAB6TJ, MAB3S2, CM-MAB and CM Series Inserts in Carpet and Tile Applications.

Category: Square / Rectangle Recessed Box Flanges