Search results

3/4 Inch Galvanized Coupling

Category: Steel Rigid Conduit Couplings

3/4"Pipe Clip with 1/4" Mounting Hole. Load Limit: 250 lbs. Standard Package Quantity: 100.

Category: Conduit Clamps

Flange- Mount conduit clips (snap-close). 1/2" to 3/4" hammer on pipe clip for 1/8" to 1/4" flanges. Standard Package Quantity: 100.

Category: Flange-Mount Cable/Conduit Clips

3/4 Inch Rigid Steel 90 Degree Elbow

Category: Rigid 90° Conduit Elbows

Flange mount conduit clips (snap- close). 1/2" to 3/4" conduit to 1/8" to 1/4" flanges - Side Mount. Standard Package Quantity: 100.

Category: Flange-Mount Cable/Conduit Clips

Standard Strut Strap, Diameter: 3/4", Material: Steel, Finish: Electro-Galvanized, Thickness .75". For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Strut Channel Rigid Conduit Clamps

Features: Physical Dimension 7/8 In Length X 1 9/16 In Diameter, Thread Length 7/16 In , Application: Threadless Rigid Conduit, Standard: Ul 514b, Fed Spec: W-f-408e, NEMA: Fb-1, Size: 0.75in, Material: Malleable Iron, Finish: Zinc Electroplated

Category: Rigid Compression Connectors - Iron

Rigid Compression Connector, 3/4 Inch, Steel, Concrete Tight, Non-Insulated, Used on Threadless Rigid Conduit, UL 514-B

Category: Steel Rigid Conduit Threadless Connectors

Pulling Elbow, 3/4 Inch, 90°, Female/Female, Gasketed, With Cover, Zinc Die Cast, For Use With Rigid/IMC Conduit

Category: Zinc Die Cast Rigid Elbows

Anti-Rattle Stud Support- Conduit up to 1", Material: Steel, Standard Packaging Quantity: 100.

Category: NM-B NMC & MC/AC Cable Support For Studs

Conduit Hardware, Couplings, Armored Cable, Type: Compression, Trade Size: 3/4 Inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Rigid Compression Couplings - Iron

Flange- Mount Conduit clips. (Snap-close). 1/2" or 3/4" Hammer-On pipe clip for flanges 5/16" to 1/2". Load limit: 75 lbs. Standard Packaging Quantity: 100.

Category: Flange-Mount Cable/Conduit Clips

OZ-Gedney Type 14-G Pipe Strap, Malleable Iron, Finish: Hot Dip Galvanized, 1/4 IN Mounting Hole Width, 1 Holes, 3/4 IN Width, Length: 2-9/16 IN, 1-7/32 IN Height, Trade Size: 3/4 IN, Third Party Certification: CSA 009795, Applicable Third Party St

Category: Malleable Iron 1-Hole Conduit Straps

OZ-Gedney Clamp Back, Size: 3/4 IN, 1/4 IN Thick, 1 Holes, Malleable Iron, Finish: Hot Dip Galvanized, Dimensions: 2-1/2 IN Length X 1-1/8 IN Width, 3/8 IN Hole, Dimension E: 9/16 IN X 7/16 IN, Third Party Certification: CSA 009795, Applicable Third

Category: Clamp Backs - Iron

Rigid Compression Coupling, 3/4 Inch, Concrete Tight, Steel

Category: Steel Rigid Conduit Threadless Compression Couplings

Grounding Bushing, Insulated, Size: 3/4 Inch, Material: Malleable Iron, Lug: Aluminum, Threaded, Maximum Temperature Rating: 150° Celsius, For Use With Rigid/IMC Conduit, With Aluminum Lug, Outside Diameter: 1 7/16 Inch, Width: 1/2 Inch, Grounding Wire Size Minimum: 14 Wag

Category: Threaded Ground Bushings