Search results

Wireway Tee Fitting, 12" x 12", Top, Bottom and Side Covers Removable

Category: Cable Tray Horizontal Tees

Corner Support Bracket Kit provides additional support for 90-degree ladder rack junction. This Corner Support Bracket Kit, LCSKG item colored Gray with a material of Steel.

Category: Cable Tray - Runway to Ceiling Kits

90 Degree Wireway Elbow, Dimensions: 6" x 6" 2.16"

Category: Cable Tray Dividers

Cable Runway Wall Angle Support fastens ladder rack to a wall or other flat surface. This Wall Angle Support, LWASK6BLK item fits 6.00 with a material of Steel color Black.

Category: Cable Tray Mounting Hardware

Cable Runway Termination provides termination when last section of ladder rack ends away from a wall. This Runway Termination Kit, LRTK18B item fits 18.00 with a material of Steel color Black.

Category: Cable Tray - Runway Support Kits

Runway Overhead 12-in. Stack Kit, Material: Steel

Category: Cable Tray - Runway Support Kits

Lay-in Galvanized 90-Deg Crosses used when four branches of wireway route cables in four directions. This Cross Fitting, F44XGV item fits 4.00x4.00 inches with a material of Steel finish Galvanized.

Category: Straight Wire Basket

U-Connector for connectin CleanTray fittings to straight sections in frequent washdown areas. This U-Connector CleanTray, CT46UCSS item measures 4.00x6.00 inches with a material of SS304 finish Brushed.

Category: Cable Tray Reducers

Butt Splice Kit White

Category: Cable Tray Splicer Kits

Equipment Rack Angles are mounted to 36in and 48in tall cabinets for extra 19in rack equipment mounting. This Equipment Rack Angles 4RU, DBERA4U item finish Galvanized with a material of Steel.

Category: Cable Tray Mounting Hardware

Clean Tray Stainless Steel Cable Tray, Material: Stainless Steel, Dimensions: 2" x 2" x 120"

Category: Straight Channel Cable Tray

Ladder Rack, Triangle Support Bracket, Fits Cable Runway 12 and 18, Material/Finish: Steel/Gray

Category: Straight Cable Ladder Tray

90-Deg Horizontal E-Bend Section (cULus Classified) is a cable runway for horizontal direction change. This 90-Degree Horizontal E-Bend Section (cULus), L90HB18BLK item fits 18.00in with a material of Steel colored Black.

Category: 90° Horizontal Cable Tray Bend

Ladder Rack, Rack-to-Run Mounting Plate, Bulletin Dcr (Ladder Tray), Size/Dims: Fits 24 Inch Cable Runway, Material/Finish: Steel/Black

Category: Cable Tray Mounting Hardware

Ladder Rack, Inside Bend, Width: 18", Material/Finish: Steel/Black

Category: Cable Tray - Runway Support Kits

90 Deg Elbow Inside Cover, Bulletin F23 (stainless Type 1 Clean Tray? Cable Tray), Size/dims: 3.00x3.00, Material/finish: Ss Type 304

Category: Straight Wire Basket

Ladder Rack, Radius Drop, Bulletin Dcr (ladder Tray), Size/dims: Fits 12.00, Material/finish: Alum/gray

Category: Cable Tray Mounting Hardware

Ladder Rack, Straight Section , Width: 12 Inches, Material/Finish: Steel/Gray

Category: Straight Cable Ladder Tray

Clean Tray Stainless Steel Cable Tray, Straight Section, Dimensions: 4" x 4" x 120"

Category: Straight Channel Cable Tray

Ladder Rack, Wall Angle Support, Bulletin Dcr (ladder Tray), Size/Dims: Fits 6 Inch, Material/Finish: Steel/Gray

Category: Cable Tray Mounting Hardware

4in Hanger Bracket (20), Bulletin F23 (Stainless Type 1 CLEAN TRAY Cable Tray), Size/Dims: 4.00x4.00, Material/Finish: SS Type 304

Category: Cable Tray Mounting Hardware

Ladder Rack, Center Support Kit, Bulletin Dcr (ladder Tray), Size/dims: Fits 18.00, Material/finish: Steel/zinc

Category: Cable Tray - Runway to Ceiling Kits

90 Degree Elbow, Inside Cover, 4x4

Category: 90° Vertical Inside Cable Tray Bend

90 Degree Wireway Tee Fitting, Top Cover Sloped Perforated, Material: Steel, Dimensions: 6" x 6"

Category: Cable Tray Dividers