Search results

1 T or 2 90° Bend Kit, 2" Deep Radius

Category: Cable Tray Splicer Kits

18" Center Hanger - Only one threaded rod is needed to suspend tray. Suspension tube protets cables. Balanced loading is recommended Black Painted for indoor use

Category: Cable Tray Center Hangers

Ladder Rack Curved Sections (cULus Classified), Material: Steel, Width: 12"

Category: 90° Vertical Inside Cable Tray Bend

Used to carry the cables horizontally throughout the system. Accepts cable retainers FRCR12BL-X or hinged cover FRHC12YL6. Use QuikLock Coupler FRBC12X4YL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

Ladder Rack Curved Sections (cULus Classified), Material: Steel, Width: 12"

Category: 90° Vertical Outside Tray Bend

Divider, 90° Elbow, Front Cover, 4" x 4", Stainless Steel

Category: Cable Tray Dividers

CBF DROPOUTKITGC

Category: Cable Tray Drop Outs

6 inch high 90 degree 12 inch radius kit contains two radius T 90 12 splice, ten EZBN 1/4 eight CE25 and four CE40 Provides a sturdy radius tee that facilitates pulling MC or large power cables. Painted finish for indoor use

Category: Cable Tray Splicer Kits

90-Degree Horizontal E-Bend Section (cULus Classified), fits 18.00, Gray, Steel

Category: 90° Horizontal Cable Tray Bend

Used to carry the cables throughout the Fiber-Duct Routing System. Accepts cover C4BL6. Cover sold separately.

Category: Straight Channel Cable Tray

Ladder Rack, Triangle Support Bracket, Fits Cable Raceway 6 and 12, Material/Finish: Steel/Gray

Category: Straight Cable Ladder Tray

Ladder Rack, Outside Bend, Bulletin Dcr (ladder Tray), Size/dims: Fits 18.00, Material/finish: Steel/gray

Category: 90° Vertical Outside Tray Bend

943483 12IN RADIUS T 90 KIT

Category: Cable Tray Splicer Kits

CBF ED275BL

Category: Cable Tray Splicer Kits

Used to support 12x4, 6x4, and 4x4 systems attaching to the top of the 19" wide version of the Panduit NF4PR84 4 post rack. Contains all hardware required to assemble bracket to the top of the 4 post rack. Bracket accepts 5/8" threaded rod (not included).

Category: Straight Channel Cable Tray

Ladder Rack, Retaining Post, Material/Finish: Steel/Zinc

Category: Cable Tray Mounting Hardware

Ladder Rack, Straight Section, Width: 18 Inches, Material/Finish: Steel/Gray

Category: Straight Cable Ladder Tray

941334 CVN150BL - CABLOFIL COVER

Category: Straight Cable Tray Covers

CBF CVN450BL

Category: Straight Cable Tray Covers

8" Center Hanger - Only one threaded rod is needed to suspend tray. Suspension tube protets cables. Balanced loading is recommended Black Painted for indoor use

Category: Cable Tray Center Hangers

Used to carry the cables horizontally throughout the system. Accepts hinged cable retainers FRCR4BL, hinged cover FRHC4YL2 or split hinged cover FRSHC4YL2. Use QuikLock Couplers FRBC4X4YL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

Ladder Rack, Adjustable Butt Splice Kit, Bulletin Dcr (Ladder Tray), Can Be Adjusted to Any Angle fFom 0 to 90 Degrees, Material/Finish: Steel/Zinc

Category: Cable Tray - Runway Support Kits

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 18" (457mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 18" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB18BL bra

Category: Cable Tray Trapeze Hangers

Ladder Rack, Inside Bend, Bulletin Dcr (ladder Tray), Size/dims: Fits 18.00, Material/finish: Steel/gray

Category: 90° Vertical Inside Cable Tray Bend