Search results

NSI HWHS6-40-12 6-4/0 AWG HEA

Category: Heavy Wall Heat Shrink

Easy-Splice Heavy Wall Heat Shrink 6-4/0 AWG, 48 Inch - 3 Count Made of specially formulated polyolefin irradiated and thermally stabilized to give the material "elastic memory". When a proper amount of heat is directly applied to the shrink sleeve, it will permanently shrink to its original unexpanded diameter tightly cover and "mold" itself into irregular shapes. The interior sleeve is coated with an adhesive that assures a watertight seal after shrinking. For use on standard poly- or elastomeric-insulated/ jacketed cables or lead-jacketed cables, which may include aluminum or steel armoring. RUS accepted for use as a secondary tap or splice cover. May be used for jacket repair on cables up to 35 kV. Qualified to ANSI C119.1-1986 for underground splicing. Insulate and seal buried electrical connections rated up to 1,000 volts. UL 486D Listed, CSA C22.2. Temperature Rating: 121-135 degrees C, 1,000V. CONNECTORS UP TO 6 INCHES: Recommended cut length = Connector length + 4 inches. CONNECTORS OVER 6 INCHES: Recommended cut length = Connector length + 5 inches.

Category: Heavy Wall Heat Shrink

NSI HWHS8-2-12 8-2 AWG HEAVY

Category: Heavy Wall Heat Shrink

NSI HWHS500-1500-9 500-1500 M

Category: Heavy Wall Heat Shrink

.500/ .250 Easy-Splice Thin Wall Tubing 200 Foot Spool Flexible flame-retardant, thin wall, general purpose heat shrinkable polyolefin tubing has a 2:1 shrink ratio. Used for electrical insulation, wire harness bundling, wire jacket marking and color coding, it also splices and makes functional terminations. Available in black, white, red, green, blue and clear. Standard packaging is either 6" lengths in blister boxes or in economical 25' spools. UL recognized to Standard 224. Black, white and colored thin wall tubing meet MIL-DTL-23053/5, Class 1. Clear meets MIL-DTL-23053/5, Class 2 and is not flame retardant. Rated 600 Volts, 125 C.

Category: Thin Wall Heat Shrink

NSI HWHS20-750-48 2/0 AWG - 7

Category: Heavy Wall Heat Shrink

.500/.250 Thin Wall Heat Shrink, 6 Inch Length,600 Volt, Round, Polyolefin, Pack Of 8

Category: Thin Wall Heat Shrink

.312/.156 Thin Wall Heat Shrink, 6 Inch Length, 600 Volt, Round, Polyolefin, Pack of 10

Category: Thin Wall Heat Shrink

.250/125 Thin Wall Heat Shrink, 25 Ft Spool, Round, Polyolefin, 600 Volt, Black

Category: Thin Wall Heat Shrink

.250/.125 THIN SHRINK 6 INCH

Category: Thin Wall Heat Shrink

.375/187 Thin Wall Heat Shrink, 25 ft, 600 Volt, Round, Polyolefin, Black

Category: Thin Wall Heat Shrink

Easy-Splice Heat Shrinkable End Cap 4/0 AWG - 750 MCM These caps replace greases, tapes, epoxy, encapsulation, or dips. In most sizes, installation may be accomplished in less than one minute. Heat-shrinkable end caps provide for efficient and positive cable end sealing. Made of thermally stabilized polyolefin, the interior of the HSC is coated with a meltable sealant to assure a watertight seal, complete insulation, abrasion and corrosion resistance. Seals may be affected over lead, steel, aluminum, copper and all standard plastic and elastomeric insulating materials and conduit. HSC end sealing caps are qualified to ANSI C119.1-1986 and rated to ICEA electrical withstand test for 1,000 volts. HSC end sealing caps can be used as a live seal for cables carrying up to 1,000 volts. They can also be used as end seals for storing and pulling de-energized cable.

Category: Heavy Wall Heat Shrink

NSI HWHS-200-12 HEAVY WALL HEAT

Category: Heavy Wall Heat Shrink

NSI HWHS-110-12 HEAVY WALL HEAT SHRINK 12"" 4/0 - 4 AWG CABLE SPLICE RANGE

Category: Heavy Wall Heat Shrink

NSI HWHS-750-12 HEAT SHRINK 12" 2 -

Category: Heavy Wall Heat Shrink