Clips, Clamps, Hangers
3,300 Found
nVent Caddy
EM-M Conduit/Pipe to Flange Clip, Spring St. 3/4", 1" EMT, 1/8"–1/4" Flange
Item #: 47163
CAT #: 16M24
UPC: 782856162162
Company wide:
Arlington
Pipe Hanger, 3/4", 1-Piece, Plastic
Item #: 69653
CAT #: NM2015
UPC: 018997545268
Company wide:
OZ Gedney
Beam Clamp, Adjustable, 1" Jaw Opening, Steel/Hot Dip Galvanized Finish
Item #: 113940
CAT #: IS-502
UPC: 783126310153
Company wide:
Topaz
Mounting Plate, Frame-In Kit For Downlighting
Item #: 1364587
CAT #: RDL6-FRAME-KIT
UPC: 751338023093
Company wide:
Arlington
Conduit Hanger With Bolt, Rigid Size: 1-1/4", EMT Size: 1-1/4 - 1-1/2"
Item #: 176150
CAT #: 2025
UPC: 018997020253
Company wide:
nVent Caddy
Threaded Bridle Ring, 1.25" dia, 1/4" screw, metal
Item #: 18536
CAT #: 4BRT20
UPC: 782856769750
Company wide:
Arlington
Conduit Hanger With Bolt, Rigid Size: 3/8 x 1/2", EMT Size: 1/2"
Item #: 332722
CAT #: 2000
UPC: 018997020000
Company wide:
nVent Caddy
H-MSM Conduit/Pipe to Flange Clip, Side Mount, 3/4", 1" EMT, 1/8"–1/4" Flange
Item #: 21196
CAT #: 16M24SM
UPC: 782856112167
Company wide:
Eaton B-Line
Rooftop Support, Dura-Blok Series, 5 x 6 x 4.800"
Item #: 280283
CAT #: DB5
UPC: 782051500356
Company wide:
Appleton
Conduit Hanger with Bolt, Diameter 2-1/2", Steel
Item #: 50274
CAT #: CH-600-B
UPC: 687855276004
Company wide:
nVent Caddy
Cat HP J-hook, pre-galvanized, 2" dia
Item #: 111176
CAT #: CAT32HP
UPC: 782856617617
Company wide:
Hubbell-Raco
Conduit Hanger with Bolt, Diameter: 3", Steel
Item #: 185486
CAT #: 2059
UPC: 050169020593
Company wide:
Carlon
Conduit Support Hanger, 2" Diameter, Polypropylene, Gray
Item #: 207527
CAT #: E978JC-CAR
UPC: 034481130673
Company wide:
Arlington
Beam Clamp, Size: 1", Threaded Rod Size: 1", Material: Plated Steel
Item #: 196048
CAT #: BC25
UPC: 018997232502
Company wide:
Dottie
Beam Clamp, 1/4" x 1", Rod Size: 1/4-20, Steel
Item #: 511394
CAT #: BK14
UPC: 781002100904
Company wide:
Appleton
Conduit Hanger with Bolt, Diameter 3", Steel
Item #: 50258
CAT #: CH-700-B
UPC: 687855277001
Company wide:
Topaz
Mounting Plate, Frame-In Kit For Downlighting
Item #: 1364586
CAT #: RDL4-FRAME-KIT
UPC: 751338023086
Company wide:
nVent Caddy
Combination Box/Conduit Hanger for 3/4-1" EMT
Item #: 47543
CAT #: 16MB18A
UPC: 782856520078
Company wide:
nVent Caddy
Hammer-On Flange Clip, Bottom Mount with Stud, Spring Steel, 1/8"–1/4" Flange
Item #: 46960
CAT #: M24S
UPC: 782856166382
Company wide:
Arlington
Conduit Hanger With Bolt, Rigid Size: 2-1/2", EMT Size: 2-1/2"
Item #: 332732
CAT #: 2060
UPC: 018997020604
Company wide:
nVent Caddy
MC/AC cable to stud clip, 1/8" max flange, 14-2 to 10-3 MC/AC
Item #: 21311
CAT #: MAC2
UPC: 782856326373
Company wide:
nVent Caddy
Bolt Close Conduit/Pipe Clamp, Steel, 2" EMT, 2" Rigid/Pipe, 0.281" Hole
Item #: 80306
CAT #: CD5B
UPC: 782856120056
Company wide:
nVent Caddy
Beam Clamp, 1/4" Rod, 0.5" Max Flange
Item #: 47947
CAT #: BC200
UPC: 782856193005
Company wide:
nVent Caddy
EM-M Conduit/Pipe to Flange Clip, Spring St. 3/4", 1" EMT, 1/8"–1/4" Flange
Flange-Mount Conduit Clips (Snap-Close). 1" Hammer-On pipe clip for flanges 1/8" to 1/4". Load Limit: 75 lbs. Standard Packaging Quantity: 100.
Item #: 47163
CAT #: 16M24
UPC: 782856162162
Category:
Flange-Mount Cable/Conduit Clips
Made in USA
Company wide:
Arlington
Pipe Hanger, 3/4", 1-Piece, Plastic
3/4" Rigid/IMC/PVC One Piece Plastic Pipe Hanger - UV Rated
Item #: 69653
CAT #: NM2015
UPC: 018997545268
Category:
Snap Lock Pipe Hangers
Company wide:
OZ Gedney
Beam Clamp, Adjustable, 1" Jaw Opening, Steel/Hot Dip Galvanized Finish
Beam Clamp, Adjustable, 1 InchJaw Opening, 3/8-16 Tapped Holes, Steel/Hot Dip Galvanized Finish
Item #: 113940
CAT #: IS-502
UPC: 783126310153
Category:
Beam Clamps - Adjustable
Company wide:
Topaz
Mounting Plate, Frame-In Kit For Downlighting
Mounting Plate, Frame-In Kit, Length 26 Inch, For Use With 6 Inch Gimbal Downlight, Steel
Item #: 1364587
CAT #: RDL6-FRAME-KIT
UPC: 751338023093
Category:
Prefab Assemblies
Company wide:
Arlington
Conduit Hanger With Bolt, Rigid Size: 1-1/4", EMT Size: 1-1/4 - 1-1/2"
Conduit Hanger With Bolt, Rigid Size: 1-1/4 Inch, EMT Size: 1-1/4 - 1-1/2 Inch, Steel, For Use With EMT/Rigid/IMC Conduit
Item #: 176150
CAT #: 2025
UPC: 018997020253
Category:
Conduit Clamps
Company wide:
nVent Caddy
Threaded Bridle Ring, 1.25" dia, 1/4" screw, metal
1-1/4" dia. Bridle Ring - 1/4"-20 threaded. Standard Packaging Quantity: 100. Ultimate Static Load: 50 lbs.
Item #: 18536
CAT #: 4BRT20
UPC: 782856769750
Company wide:
Arlington
Conduit Hanger With Bolt, Rigid Size: 3/8 x 1/2", EMT Size: 1/2"
Conduit Hanger With Bolt, Rigid Size: 3/8 x 1/2 Inch, EMT Size: 1/2 Inch, Steel, For Use With EMT/Rigid/IMC Conduit
Item #: 332722
CAT #: 2000
UPC: 018997020000
Category:
Conduit Clamps
Company wide:
nVent Caddy
H-MSM Conduit/Pipe to Flange Clip, Side Mount, 3/4", 1" EMT, 1/8"–1/4" Flange
Flange-Mount Conduit Clips (Snap-Close). 1" conduit to 1/8" to 1/4" flanges. Load Limit: 25 lbs. Standard Packaging Quantity: 100.
Item #: 21196
CAT #: 16M24SM
UPC: 782856112167
Category:
Flange-Mount Cable/Conduit Clips
Made in USA
Company wide:
Eaton B-Line
Rooftop Support, Dura-Blok Series, 5 x 6 x 4.800"
Rooftop Support, Dura-Blok Series, 5 x 6 x 4.800 Inch, Load Rating 200 Pounds, UV Resistant Rubber
Item #: 280283
CAT #: DB5
UPC: 782051500356
Category:
Pyramid Pipe & Equipment Supports
Company wide:
Appleton
Conduit Hanger with Bolt, Diameter 2-1/2", Steel
Conduit Hanger with Bolt, Diameter 2-1/2 Inch, Steel, For Use With Rigid/IMC/EMT to Threaded Rod
Item #: 50274
CAT #: CH-600-B
UPC: 687855276004
Category:
Conduit Clamps
Company wide:
nVent Caddy
Cat HP J-hook, pre-galvanized, 2" dia
J-Hook, Diameter: 2", Steel, 50 Pack
Item #: 111176
CAT #: CAT32HP
UPC: 782856617617
Category:
J-Hook - Screw-On
Made in USA
Company wide:
Hubbell-Raco
Conduit Hanger with Bolt, Diameter: 3", Steel
Conduit Hanger with Bolt, Diameter: 3 Inch, Steel, For Use With Rigid/IMC/EMT to Threaded Rod
Item #: 185486
CAT #: 2059
UPC: 050169020593
Category:
Conduit Clamps
Company wide:
Carlon
Conduit Support Hanger, 2" Diameter, Polypropylene, Gray
Conduit Support Hanger, 2 Inch Diameter, Polypropylene, Gray, Pack of 10 Each
Item #: 207527
CAT #: E978JC-CAR
UPC: 034481130673
Category:
Snap Lock Pipe Hangers
Company wide:
Arlington
Beam Clamp, Size: 1", Threaded Rod Size: 1", Material: Plated Steel
Beam Clamp, Size: 1 Inch, Threaded Rod Size: 1 Inch, Material: Plated Steel.
Item #: 196048
CAT #: BC25
UPC: 018997232502
Category:
Beam Clamps - Adjustable
Company wide:
Dottie
Beam Clamp, 1/4" x 1", Rod Size: 1/4-20, Steel
Beam Clamp, 1/4 inch x 1 inch, Rod Size: 1/4-20, Steel
Item #: 511394
CAT #: BK14
UPC: 781002100904
Category:
Beam Clamps - Adjustable
Company wide:
Appleton
Conduit Hanger with Bolt, Diameter 3", Steel
Conduit Hanger with Bolt, Diameter 3 Inch, Steel, For Use With Rigid/IMC/EMT to Threaded Rod
Item #: 50258
CAT #: CH-700-B
UPC: 687855277001
Category:
Conduit Clamps
Company wide:
Topaz
Mounting Plate, Frame-In Kit For Downlighting
Mounting Plate, Frame-In Kit, Length 26 Inch, For Use With 4 Inch Gimbal Downlight, Steel
Item #: 1364586
CAT #: RDL4-FRAME-KIT
UPC: 751338023086
Category:
Prefab Assemblies
Company wide:
nVent Caddy
Combination Box/Conduit Hanger for 3/4-1" EMT
Combination Box/Conduit Hangers from Drop Wire/Rod and Beam. Mounts 4" Sq. Boxes with 1" Conduit Plain Center-Hole for Screw or Threaded Rod Mount. Standard Packaging Quantity: 25.
Item #: 47543
CAT #: 16MB18A
UPC: 782856520078
Made in USA
Company wide:
nVent Caddy
Hammer-On Flange Clip, Bottom Mount with Stud, Spring Steel, 1/8"–1/4" Flange
Hammer-On Flange Clip for 1/8"-1/4" flange - 1/4-20 x 3/8" staked stud. Standard Packaging Quantity: 100
Item #: 46960
CAT #: M24S
UPC: 782856166382
Category:
Flange Clips
Company wide:
Arlington
Conduit Hanger With Bolt, Rigid Size: 2-1/2", EMT Size: 2-1/2"
Conduit Hanger With Bolt, Rigid Size: 2-1/2 Inch, EMT Size: 2-1/2 Inch, Steel, For Use With EMT/Rigid/IMC Conduit
Item #: 332732
CAT #: 2060
UPC: 018997020604
Category:
Conduit Clamps
Company wide:
nVent Caddy
MC/AC cable to stud clip, 1/8" max flange, 14-2 to 10-3 MC/AC
Snap-In Support, MC/AC Cable Flexible Conduit, Metal or Wood Stud and Up to 1/8 Inch Flange, Standard Packaging Quantity: 100.
Item #: 21311
CAT #: MAC2
UPC: 782856326373
Category:
MC/AC Cable to Wire/Rod & Beam
Made in USA
Company wide:
nVent Caddy
Bolt Close Conduit/Pipe Clamp, Steel, 2" EMT, 2" Rigid/Pipe, 0.281" Hole
2" EMT or RIGID Conduit Clamp with retained bolt and built-in nut; 5/16" mounting hole. Load limit: 350 lbs. Standard Packaging Quantity: 50
Item #: 80306
CAT #: CD5B
UPC: 782856120056
Category:
Conduit Clamps
Company wide:
nVent Caddy
Beam Clamp, 1/4" Rod, 0.5" Max Flange
Beam Clamp thru 5/8" flange. Static load: 100 lbs. Standard Packaging Quantity: 50.
Item #: 47947
CAT #: BC200
UPC: 782856193005
Category:
Beam Clamps - Adjustable
Company wide:
Bridgeport Fittings
1" STEEL BEAM CLAMP
Clamp, Beam, Insulator Support, Steel, Tap Size (UNC) 1/4-20
Item #: 383804
CAT #: 951-S
UPC: 781747029515
Category:
Beam Clamps - Adjustable
Company wide:
3,300 Items found