Heating & Ventilation

Rollaround Cart Kit for 13.5kW XRM Heaters (Includes Safety Grilles)

Category: Heater Conversion Kits

7.5KW @ 208V 3PHASE PLENUM RATED UNIT HEATERS FOR CONCEALED SPACES

Category: Construction Unit Heaters

Padlocking Wing Knob, Stainless Steel, Stainless Steel

Category: Heater Replacement Knobs

SATIN NICKEL W/ GLASS GLOBE

Category: Fan / Light Units

Used to support the 24x4 system from new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Category: Brackets

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver

Category: Brackets

Grill Replacement With Springs For Broan: 676, 684. Nutone: 684NT.

Category: Replacement Fan Accessories

Ceiling Hat Bracket. Compatible with: Cadet CEH Series Industrial Unit Heaters. *Cadet Part # 09660*

Category: Heater Mounting Brackets

Airtec 8" Round Grille/Damper/Box for 6,7,8" Duct

Category: Duct Dampers

4" Housing Pack, For Use With NuTone AN70LF, AEN80LF, and AEN80BLF Fan/Light Fan Finish Packs To Complete The Installation, Housing Dimensions L x W x D: 9-1/4" x 10" x 5-3/4"

Category: Fan Housing / Finish Packs

1500W 120V RESIDENTIAL INFRARED HEATER

Category: Infrared Heaters

Integrity Universal Housing only for ITG80H-B

Category: Fan Housing / Finish Packs

4" Finish Pack, CFM: 50, Sones: 0.5, Energy Star Qualified, Series: InVent. For Use With Broan A000HF Fan Housing Packs To Complete The Installation. Includes: Fan Motor and White Grille. Housing L x W x D: 9-1/4" x 10" x 5-3/4".Grille Size: 11-3/8"L X 12"W.

Category: Fan Housing / Finish Packs

Dimplex Industrial Heater EUH03B73CT 7500 Watt 208V with Built-In Thermostat. 1/3 Phase

Category: Industrial Unit Heaters

1-Piece Flush-Mount Floor Brush Kit with Cover and Two-Stage Sealing

Category: Central Vacuum Brush & Hose Kits

Cadet Com-Pak Electric Wall Heater (Complete Unit with Wall Can and Grille, no Thermostat), 750W 240V, Almond *Cadet Part # 67535*

Category: All Area Fan Forced Heaters

ULTRA Multi-Speed Energy Star Motion Sensing Fan, 110 CFM, <0.3 Sones

Category: Fan / Motion Sensor Units

4" Finish Pack, CFM: 50, Sones: 0.5, Energy Star Qualified, Series: InVent. For Use With NuTone AN000HF Fan Housing Packs To Complete The Installation. Includes: Fan Motor and White Grille. Housing L x W x D: 9-1/4" x 10" x 5-3/4".Grille Size: 11-3/8"L X 12"W.

Category: Fan Housing / Finish Packs

50 Cfm Replacement Motor/Wheel

Category: Replacement Fan Accessories

NUT 345GOWW WOOD SOLAR GABLE

Category: Gable Mount Attic Fans

Range Hood, 36 Inch, Telescopic Downdraft System, 500 CFM, Stainless Steel

Category: Ducted Range Hoods

ULTRA Multi-Speed Energy Star Humidity Sensing Fan/Light, 110 CFM, <0.3 Sones with 36W Fluorescent Light (2 - 18 watt GU24 bulbs included) and 4W night light (bulb not included)

Category: Fan / Light Units

QFF Series - Ceiling-Mounted Fan-Forced Heater, 3000/1500 Watt @ 277V, Factory-wired for highest wattage, field-convertible to lower wattages. Accommodates pneumatic/electric or low voltage controls

Category: Fan Forced - Ceiling

Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in

Category: Brackets