Search results

8IN COVER ASSEMBLYWAL 8CTGY 8IN COVER ASSEMBLY

Category: Round Recessed Box Covers

Wlk 862tgfi Floor Box W/895tg

Category: Assembled Recessed Round Boxes

6" Poke-Thru Assembly, Prewired for A/V, Duplex ReceptPoke-Thru Device, Recessed, Assembled Unit, Evolution Series, Metallic, Cover Type: Twist, Material/Finish: Die-Cast Aluminum/Gray, Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". Cover Type: Slide, Device Type: (1) Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) & Accepts the Extron® Electronics AAP and MAAP Series Devices, For Use with Wood, Laminate, & Tile Flooring.

Category: Assembled Poke-Through Units

Flush Style Cover with Floor Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Gray

Category: Square / Rectangle Recessed Box Covers

Aluminum flush style cover assembly with a solid top. Cover is for use on Evolution Series 6-, 8-, and 10-gang floor boxes. Cover finished gray (GY)

Category: Square / Rectangle Recessed Box Covers

Surface Style Cover with Solid Lid, Material/Finish: Die Cast Aluminum/Nickel

Category: Square / Rectangle Recessed Box Covers

Surface Style Cover with Floor Insert, Flange, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Nickel

Category: Square / Rectangle Recessed Box Covers

6in Core-unwired-flush NickelWlk 6atnk 6in Core-unwired-fl

Category: Assembled Poke-Through Units

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Recessed Prewired A/V Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Combination Box, 4-Compartment, Metallic, Depth: 3-7/16 Inch, Length: 12-3/4 Inch, Width: 10 Inch. Includes: (2) Receptacle Brackets. For use in Concrete Floor Applications. Floor cover is not included with box and needs to be purchased separately. ******DISCONTINUED******

Category: Recessed Compartment Boxes

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

WMD WAPBRKT WIRELESS ACCESS P

Category: Enclosure Mounting Bracket Kits

Cvr Assy-brushed Aluminum-flushFlanged Cover Assembly, Material: Aluminum, Size: 6 9/16 in Length, 7 3/4 in Width

Category: Square / Rectangle Recessed Box Covers

Poke-Thru, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Brass

Category: Poke-Through Cover Assemblies

6IN CORE-PREWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Nickel

Category: Assembled Poke-Through Units

8IN CORE-UNWIRED-Recessed Assembly With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8" (203mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Diecast aluminum cover assembly Finish: (BS) brass.

Category: Poke-Through Cover Assemblies

6IN CORE-PREWIREDFor carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: One (1) proprietary 20A Duplex Power Receptacle installed, One (1) 682A Device Plate, One (1) 68MAAP Device Plate. For Center Compartment: One (1) 6DEC Mounting Plate, One (1) 6AAP Mounting Plate, One (1) 6MAAP Device Plate. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Black

Category: Assembled Poke-Through Units

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Flush Style Cover Assembly with Floor Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Aluminum

Category: Square / Rectangle Recessed Box Covers

Surface Style Cover with Floor Insert, Flange, Material/Finish: Die Cast Aluminum/Nickel

Category: Square / Rectangle Recessed Box Covers

Surface Style Floor Box Cover Assembly with Insert, Material/Finish: Die Cast Aluminum/Brass

Category: Square / Rectangle Recessed Box Covers

8" Poke-Thru Device, Recessed, Evolution Series, Nickel8" Poke-Thru Device, Recessed Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Recessed: 3-1/4", No Device: Communication, or A/V Capability, Color Nickel, Depth: 16-3/4, For Tile, Laminate and Wood Flooring.

Category: Assembled Poke-Through Units