Search results

Base/plinth components, front and rear, 200 mm, Sheet steel, for TS, TS IT, SE, CM, TP, PC, IW, Solid, material: Base/plinth components: Sheet steel, Cover caps: Plastic, surface: Spray-finished, color: RAL 7022, Cover caps: RAL 9005, supply includes: 2 base/plinth components, 4 cover caps, Assembly parts, description: Base/plinth component consisting of one trim panel and two pre-configured corner pieces. In 200 mm high base/plinth components, one trim panel is divided into two for cable entry. Packaging Unit: 2 pc(s).

Category: Enclosure Housing Bases

Wall-mounted cooling units TopTherm "Blue e", Total cooling output 2.00 to 4.00 kW, total cooling output L35L35 at 50Hz: 7506, material: Sheet steel, color: RAL 7035, supply includes: Nano-coated condenser, Integral electric condensate evaporation, Fully wired ready for connection (plug-in terminal strip), Drilling template, Assembly parts, description: Energy-efficient Blue e wall-mounted cooling units in output categories from 2,000 W to 4,000 W, with integral e-Comfort controller, RiNano coating on the condenser and electrical condensate evaporation as standard.

Category: Enclosure Air Conditioners

Wall Mount Enclosure, Hinge Cover With 3-Point Latch, NEMA 4, 47(H) x 35(W) x 12(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latch, NEMA 4, 20(H) x 20(W) x 12(D) Inch, Carbon Steel, Includes Steel Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Hinge Cover With 3-Point Latch, NEMA 4, 47(H) x 35(W) x 16(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

Base/plinth trim panels, side, 100 mm, for base/plinth components front and rear, material: Sheet steel, surface: Spray-finished, color: RAL 7022, supply includes: 2 base/plinth trim panels, Assembly parts, description: For mounting between the base/plinth components. At 200 mm height, two 100 mm base/plinth trims may be used. Base/plinth trims may be installed rotated through 90 deg in order to stabilise bayed base/plinth components. Packaging Unit: 2 pc(s).

Category: Enclosure Housing Bases

Grid Strap, Five Row, Length: 440 mm, Steel/Zinc Plated

Category: Enclosure Mounting Bracket Kits

TS Bayed Enclosure with Mounting Plate and Single Door, 800 x 2000 x 800 mm, IP55 Rated, NEMA 12, Includes Door, Roof Plate, Rear Panel, (4) Eyebolts, 3mm Double Bit Lock, Base Plates, Mounting Plate, (2) TS Punched Rails 18 x 38 mm, (2) Support Strips

Category: NEMA 4 Floor Mount Enclosures

Comfort Handle, TS Series, For Use With Lock Inserts, Includes (2) Keys

Category: Enclosure Handle Kits

TS punched section with mounting flange, 23 x 73 mm, For the inner mounting level, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly screws, description: The alternative to the TS punched section with mounting flange 17 x 73 mm, with punchings for captive nuts/threaded blocks instead of the slotted holes top and bottom. Simply locate and secure. Packaging Unit: 4 pc(s).

Category: Enclosure Mounting Bracket Kits

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latch, NEMA 4, 30(H) x 20(W) x 8.3(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

PS punched section without mounting flange, 23 x 73 mm, for TS, SE, material: Sheet steel, surface: Zinc-plated, description: For mounting on the horizontal and vertical enclosure sections of a TS via support bracket PS. Packaging Unit: 4 pc(s).

Category: Enclosure Mounting Bracket Kits

Side panels, screw-fastened, sheet steel, for TS, TS IT, material: Sheet steel, 1.5 mm, surface: dipcoat-primed, powder-coated on the outside, color: RAL 7035, supply includes: Assembly parts, description: Side panels, screw-fastened, sheet steel, for TS. Packaging Unit: 2 pc(s).

Category: Side Mount Enclosure Panels

Data Pocket, Mounts to Door Frame, Assembly Screws included, Size/Dim: 800 mm, Depth: 90 mm, Color: Light Gray.

Category: Enclosure Pole Mount Kits

M6 CAPTIVE NUTS W/O CONTACT PU=50

Category: Enclosure Mounting Bracket Kits

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures