Boxes & Enclosures

6-Gang, Screw-On, New/Old Work, Switch/Outlet Box, Non-Metallic, Depth: 3-1/2". Cubic Inches: 110". Includes: Low Voltage Partition.

Category: Non-Metallic New Work Switch / Outlet Boxes

18.0 Cu. In. Single Gang Electrical Box For Use With Nonmeatllic Sheathed Cable- Molded-in Splined Device Holes, Leveling Ribs - New Work Residential Construction 2 Hr Fire Resistive Walls & Ceilings - Pvc - Thermoplastic - Size: D=2 5/8",w=2 5/16", H=3 3/4" - Mount With Stud Face Mount Molded-in Hanger Bracket With 1/2" Offset And Opposite Side Drywall Tabs

Category: Non-Metallic Switch / Outlet Boxes With Brackets

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Weatherproof Closure Plug, 3/4", Zinc Die Cast

Category: Weatherproof Box Closure Plugs

HAM EN4SD20168GY ECLIPSE N4 1

Category: NEMA 4 Wall Mount Enclosures

Recessed Floor Plate Assembly, 2 outlets, Box-Steel, Gasket-Neoprene, Aluminum, Nickel Silver material, 5 x 2-7/8 x 4 in. Size, Gray/Gold, Water Tight Assembly construction, Bottom, Side cable entry, Floor Mount, 18 cu.in cubic capacity, 1/2 in. knockouts, including 15 AMP (TR) Receptacle

Category: Assembled Recessed Gang Boxes

52C4-1/2

Category: Octagon Metallic Box Mud Rings

Terminal boxes JB, Stainless steel, material: Cover: Stainless steel 1.4301 (AISI 304), all-round foamed-in PU seal, Enclosure: Stainless steel 1.4301 (AISI 304), surface: Enclosure and door: Brushed, grain 240, supply includes: 180¦ hinge, description: The JB enclosure offers protection for dense wiring and sensitive small instruments. These hinged cover junction boxes combine the advantages of the AE and KL series at an economical cost. Features include 180 degree hinge and slotted insert quarter turn latch. Foamed-in-place gasket and a knife-edge perimeter add extra protection.

Category: Stainless Steel Continuous Hinge Cover Junction Boxes

Breather, M25 x 1,5 mm, Nuts available: With nut, Packaging unit: 20, Polyamide, Zone 1/2/21/22

Category: Enclosure Non-Metallic Ventilators

4-11/16 Inch Square Swivel Fixture, Diameter: 1/2 and 3/4 Inch, Support: 50 LBS., Steel

Category: Metallic Swivel Fixture Hangers

Wall Mount Enclosure, Hinge Cover With 3-Point Latch, NEMA 4, 47(H) x 35(W) x 12(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

4-11/16 Square Inch Cover, Mud Ring, 2-Device, Flat

Category: 4-11/16" Square Metallic Box Mud Rings

4 SQUARE BOX COVER 5/8 RAISED 2 3/4 EARS

Category: 4" Square Metallic Box Fixture Covers

Underground Enclosure, Open Bottom, 24 x 36 x 36 Inch, Polymer Concrete

Category: Rectangular Concrete Underground Pull Boxes

Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, GUAT Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 5 Inch Opening and (3) 1-1/2 Inch Threaded Hubs. For Use With Threaded Metal Conduit.

Category: Explosion-Proof T Conduit Outlet Boxes

Rectangular Floor Box Assembly With A Nickel Plated Brass Duplex Device Cover

Category: Assembled Recessed Gang Boxes

Switch/Outlet Box with Stabilizing Bar, 3-Gang, Nail-On, Thermoset Fiberglass, Depth: 3 Inch. Cubic Inches: 46.0 Inch. Includes: Clamps.

Category: Non-Metallic Switch / Outlet Boxes With Brackets

Underground Enclosure, Standard Open Bottom, 17 x 30 x 12 Inch, Polymer Concrete, Includes FDOT Stencils

Category: Rectangular Concrete Underground Pull Boxes

Underground Enclosure, Standard Open Bottom, 24 x 36 x 24 Inch, Polymer Concrete, Includes FDOT Stencils

Category: Rectangular Concrete Underground Pull Boxes

4 11/16 SQUARE OUTLET BOX 1 1/4 KNOCK OUT

Category: 4-11/16" Square Metallic Boxes

Weatherproof Box Extension, 1 Gang, 1 Inch Deep, Aluminum, Gray

Category: 1-Gang Metallic Weatherproof Box Extensions

ALL 9350-FANB 22.5 CI 4 IN RN

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

Round Bolt Down Lid For G05T Traffic Valve Box, 11 Inch Diameter, Cast Iron, Includes Locking Grade Ring.

Category: Non-Metallic Underground Pull Box Covers

Knockout Seal, Size: 2-1/2 Inch, Material/Finish: Steel/Gray

Category: Painted Steel Enclosure Hole Seals