Boxes & Enclosures

RFBA 2G 4G 4 IN CIRC EXTEN RING

Category: Recessed Compartment Box Covers

Floor Box Assembly, Duplex Receptacle, Includes: Steel Box, Flange, Hinged Cover Assembly, 15 Amp, 125 Volt Tamper Resistant Duplex Receptacle, Designed For installation in Wood Floors, Aluminum Cover/Brass Plated

Category: Assembled Recessed Round Boxes

Weatherproof In-Use Cover and Box Kit With 20 Amp, 125 Volt Receptacle, 2 Gang, (6) 1/2 Inch Threaded Outlets, GFCI Type, Vertical Mount, Aluminum, Gray, Includes Inserts for Single, Duplex and Decora/GFCI Receptacles, Also Includes Pre-Installed Weatherproof Gasket

Category: 2-Gang Weatherproof In-Use Box Covers

Two Door, Floor-Mounted, Type 12, Enclosure, Size/Dims: 72.06" x 72.06" x 12.06", Material/Finish: Steel/Gray

Category: NEMA 12 Floor Mount Enclosures

Floor Box, 6 Gang, Evolution Series, 4.130 x 13.750 x 16.130 Inch, 915.980 Cubic Inches, Aluminum, Includes Protective/Disposable Cover, Tunnel System For Connecting Two Modules, (2) Removable Modules, (2) Toggle Clamps, (2) Cable Management Guides, (2) Levelling Support Legs, (2) "L" Brackets, and Knockouts Ranging from 3/4 - 2 Inch

Category: Square Recessed Floor Boxes

Adjustable Sliderbar Box Kit, Includes: (1) SL18 SliderBar 10.500 - 17 Inch Adjustable Length, (1) SLB101 1-Gang Non-Metallic Box With Installation Screws and Slider Clip

Category: Non-Metallic Switch / Outlet Boxes With Brackets

1-Gang, Vertical Mount, Weatherproof, Non-Metallic, Recessed Electrical Box with In-Use Cover, Depth: 1-1/2". Cubic Inches: 22". Smoke. Includes: (1) Duplex, (1) Decorator/GFCI Receptacle Faceplate and (1) NM Cable Connector. Flange Depth Is Adjustable. For use in Foam Wall and Concrete Block/Stucco Applications.

Category: Recessed Weatherproof In-Use Boxes

Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4 (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC4 Assembled Unit-Aluminum Finish Flange Black Slide Holder, 2-20A Duplex Standard or IG and Cat 6 Connectors.

Category: Assembled Poke-Through Units

Panel For Enclosure, Inline Series, Landscape, 8.31 x 11.46 Inch, Material/Finish: Steel/White Powder Coat

Category: Enclosure Back Panels

OZ-Gedney Type GUALB Conduit Outlet Box, Number Of Outlet: 2, Malleable Iron Body, Copper-Free Aluminum Cover, Size: 3/4 IN, Cable Entry: (2) 3/4 IN Hubs, 15 CU-IN Capacity, No, 3 IN Cover Opening, Finish: Zinc Electroplated With Aluminum Enamel, 3-5/8 IN Width, 2-1/8 IN Depth, 3-5/8 IN Height, NEMA Rating: NEMA 4, 7CD, 9EFG, Third Party Certification: UL File Number E-30513, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 020945, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, Military Specification Mil-F-28675, Federal Specification A-A-50563, For Rigid Conduit And IMC

Category: Explosion-Proof LB Conduit Outlet Boxes

Panels, fits 400x300mm, Steel

Category: Enclosure Back Panels

Device Plate, 1-1/2-Gang Type: GFCI, 106 Style Devices for Power and Audio/Video Applications, Metallic

Category: Poke-Through Mounting Plates

13X24X18 GROUND ACCESS WELL

Category: Round Non-Metallic Underground Pull Boxes

CARPET CVR 6/10G FLUSH ALUM POWDER

Category: Square / Rectangle Recessed Box Covers

4IN OCT BOX STL 1-1/2IN DP 1/2IN KO-50PK

Category: Octagon Metallic Boxes

4IN SQ STL RING RAISED 1-1/2IN 1-GANG 11.3 CU-50PK

Category: 4" Square Metallic Box Mud Rings

ROUND STEEL PANCAKE BOX RAISED 5/8IN 1/2IN KO-50PK

Category: Metallic Ceiling Pans

4IN SQ STL RING RAISED 1/2IN 2-GANG 5.4CU-100PK

Category: 4" Square Metallic Box Mud Rings

Carlon 1 Gang Ent Box

Category: ENT Quick Connect Switch / Outlet Boxes

Cover Plate Flange, 1-Gang, Non-Metallic, Brown. W x L: 4-3/4 x 5-3/4 Inch. For use with: 829PFLRT, 829PFL Covers and Accepts MAB6TJ, MAB3S2, CM-MAB and CM Series Inserts in Carpet and Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

Upper Panel Device Plate, 1-Gang, Metallic, Blank. For Use with AF Series Raised Floor Boxes.

Category: Recessed Floor Box Service Fittings

Pull Box, Type 1, Hinged Cover / KO's, Size/Dims: 12.00x12.00x4.00, Material/Finish: Steel/Gray.

Category: Hinge Cover NEMA 1 Junction Boxes

Enclosure, Hinge Cover, NEMA 3R, 12 x 12 x 10 Inch, Steel with Gray Finish

Category: NEMA 3R Hinge Cover Enclosures

Junction Box, NEMA 12, Hinged Cover, Quick Release, 10 x 8 x 4 Inch, Steel/Gray

Category: NEMA 12 Hinge Cover Junction Boxes