Search results

One-gang device plate in standard (GFI) widths.

Category: 1-Gang Raceway Device Brackets & Plates

For mounting one or two keystone device modules, recessed to provide a flush installation. Has one opening and one KO. Fog White

Category: 1-Gang Raceway Box Covers & Faceplates

90 degree tee connection of two runs of AL3300 Series Raceway. Three AL3300 Couplings included.

Category: Plugmold Tee Fittings

Non-Metallic, Tee Fitting, PN10 Series. Size: 2-11/16" Length, 5-5/16" Width. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Eight (4 duplex) outlets, nonmetallic housing with ivory finish. 6' (1.8m) cord. Length 48" (1.2m). Receptacle center-to-center 12" (305mm).

Category: Single Circuit Non-Metallic Plugmold

Non-Metallic, 2A, Dual Unloaded Systimax Module. Gray.

Category: Keystone Modules For Metallic Raceway

Three-gang device plate in standard (D) widths.

Category: 3-Gang Raceway Device Brackets & Plates

For 30TP-2V / 30TC-2V and 30TP-4V / 30TC-4V Series. 12" (305mm) long. Communication covers for additional voice/data connectors. Each cover includes Kos for four RJ11/RJ45 connectors (.760" x .576" (19.3mm x 14.6mm)), mouse hole for exiting communication cables (grommet furnished).

Category: Power Pole Plates

ORTRONICS TRACJACK BEZEL-LIGHTGRAY

Category: 1-Gang Raceway Box Extension Adapters

Entrance End Fitting, DS4000 Series, Gray

Category: Large 2-Piece Metallic Raceway End Fittings

PN5 Series Drop Ceiling Connector for dropping cables from ceiling into the raceway. Has 1/2" and 3/4" concentric trade size KOs. Includes PN153R Reducer Adapter for use with PN03 Series Raceway. Finish - Ivory

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Non-Metallic, Reducing Connector, 2800 & 2700 Series. Size: 3/4" Width. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

For 25DTP and 25DTC Series. Communications Covers for Ortronics Series II modular connectivity solutions (adapter installed).

Category: Power Pole Plates

Available in standard width. Provided with one opening to accept one Ortronics TracJack bezel and one Ortronics Series II bezel. Will

Category: 1-Gang Raceway Device Brackets & Plates

For right angles turns around external corners. White

Category: 2-Piece Non-Metallic Raceway Elbows

Closes off open end of 2400 Series Raceway. White.

Category: Small 2-Piece Metallic Raceway End Fittings

Flat Elbow for Aluminum Raceway, 90°, 10" Each Leg

Category: Large 2-Piece Metallic Raceway Elbows

Non-Metallic, Device Bracket, 40N2 / 60N2 Series. Size: 5-1/4" Length, 2-3/16" Width. For use with Ortronics TracJack Individual Jack System, Ortronics Series II Front-Loading Module System, and Wiremold Open System Communications Modules. Color: White.

Category: 2-Piece Non-Metallic Raceway Covers

PN 10 Series Radiused External Elbow. For right angle turns around external corners. Finish - White

Category: 1-Piece Non-Metallic Raceway Elbows

W-mold Al2451h Box Adaptor

Category: Small 2-Piece Metallic Raceway Connectors & Adapters

W-mold 5547-wh Transition Ft

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Mounts power/communications devices when additional depth is required. Has combination twistouts for 2700, 2800, 2900 and NM2000 Series Raceways. 4 3/4" L x 3" W x 2 3/4" D (121mm L x 76mm W x 70mm D). 1-Gang. White

Category: Plugmold Device Boxes

W-mold V5748-6 6g Sw&rcpt Box

Category: 6-Gang Raceway Device Boxes

For connecting vertical runs of DS4000 Series Raceway with OFR Series Raceway. Includes removable divider than can be positioned to feed any raceway channel.

Category: Metallic Overfloor Raceway Connectors & Adapters