Conduit, Duct, & Raceway

Steel, Prewired Plugmold, Tamper-Resistant, Length: 6 ft. Color: Ivory. Outlets (6") O/C: Total Outlets: (11) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Covers the seam where two pieces of 3000 Series Raceway Cover come together. Gray

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

B11-120GLV

Category: Steel Solid Strut

Closes off open end of ALDS4000B Base.

Category: Large 2-Piece Metallic Raceway End Fittings

5 Inch PVC 22-1/2 Degree Sweep Elbow, 36 Inch Radius, Gray, Schedule 40

Category: 22-1/2° PVC Sweeps

Narrow Slot Wiring Duct, PVC, Blue, 2" x 3" x 6', SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

For power or communication devices in a single compartment. For use with 5507 Series Faceplates, Ortronics TracJack and Series II Modules, Pass and Seymour Activate Series Inserts, and Wiremold Open System Communication Modules. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Orthonics Series II Inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 1-Gang Raceway Device Brackets & Plates

Required for holding AL3300D5 Divider in place. Use one every 30" (762mm).

Category: Plugmold Clips, Couplings, & Adapters

Vertical Outside 90° Bend, 12" Radius, 6" Deep, 12" Wide, Aluminum

Category: 90° Vertical Outside Tray Bend

Steel, Cover Only. Color: Ivory. Add-On Cover for 25DTP Series Poles – (3) Duplex Receptacles.

Category: Steel Power Poles

Steel, Wall Box Connector, 4000 Series. Size: 12" Length. Includes: (2) 1/2", 3/4", 1", 1-1/4" Trade Size KOs, (2) 2-9/16"x1-11/16" Rectangular KOs. Ivory.

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Lay-In Type 1 Screw Cover Wireway, Straight Section, Size: 4 Inch Wide, 4 Inch Deep, 10 Foot Length, 16 Gauge Steel, Galvanized, No Knockouts

Category: Screw Cover Wireway

Support Hanger, fits 2.50x2.50, Gray, Steel

Category: Wireway Support Hangers

Non-Metallic, Blank End Fitting, 2300 Series. Size: 2-1/4" Length, 1" Width. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway End Fittings

OFR Series Overfloor Raceway Base, Aluminum

Category: Metallic Overfloor Raceway

Steel, 1-Gang, Device Box, 500, 700 Series. Size: 1-3/8" Depth. White.

Category: 1-Gang Raceway Device Boxes

Wireway, Gasket/Screws, Bulletin F20 (feed through Type 12 Wireway), Size/dims:fits 8.00x8.00, Material/finish: Rubber/Steel

Category: Wireway Gaskets

Wireway, Telescope Fitting, Bulletin F22 (Stainless Steel Feed-Through Type 4x Wireway), Size/dims: 4.00x4.00, Material/Finish: SS Type 304

Category: Wireway Telescope Fittings

Ladder Type Cable Tray, Aluminum, 24 Inch Wide x 6 Inch Deep x 20 Foot Length, 9 Inch Rung Spacing

Category: Straight Cable Ladder Tray

Telescoping Fitting, 6 Inch x 6 Inch, Steel, Gray, for Type 12 Feed-Through Wireway.

Category: Wireway Telescope Fittings

Non-Metallic, Cover Clip, NM2000 Series. Size: 1-1/2" Length. PVC, Ivory.

Category: Plugmold Clips, Couplings, & Adapters

All Threaded Rod, Zinc-Plated, 1/2-13 Thread x 6 Foot Length

Category: Threaded Rod

UNISTR P9200 20PG 1 7/8inSQTUBE,1/2

Category: Steel Strut with Holes

Cable Tray 90° Horizontal Bend, 12" Radius, 12" Wide, 6" High, Aluminum

Category: 90° Horizontal Cable Tray Bend