Conduit, Duct, & Raceway

T70/Twin70 Raceway Divider Wall, 10' Length, PVC, Gray, Snaps onto rails in T-70/Twin-70 raceway base to create separate channels. Must use wire retainers to ensure channel separation per UL/CSA.

Category: Wall Duct Dividers

Aluminum, 1-Gang, Switch & Receptacle Box, AL Series. Size: 1-3/8" Depth, 4-5/8" Length, 3-1/16" Width.

Category: 1-Gang Raceway Switch & Receptacle Boxes

Right Angle Fitting,LD3/LDPH3/LDS3 Raceway, Non-Metallic, Rigid PVC, Off-White, One Inch Bend Radius for TIA/EIA Compliance

Category: 1-Piece Non-Metallic Raceway Elbows

Tele-Power Pole, Two-Compartment, Nominal Thickness: 0.50 Inch, Length: 10 Feet 5 Inches, Factory Wired with (1) 20 Amp, 125 Volt Dedicated/Isolated Ground Duplex Receptacle and (1) Standard 20 Amp, 125 Volt Duplex Receptacle, Opening for Communication and 1/2 Inch Hole for Power is Provided at Top, 8 Inch Cover at Top Front of Pole is Removable For Making Power Wiring Connections.

Category: Aluminum Power Poles

Tamper Resistant Two-Piece Latching Surface Raceway, Supplied With Pre-Punched Mounting Holes And Factory Applied Adhesive Tape, 1.02 x 0.55", 8 Ft., White

Category: 1-Piece Non-Metallic Raceway

High Density Slotted Wall Wiring Duct, 4" x 4", Non-Adhesive, PVC, Gray, 120ft/Carton ***Cover Sold Separately***

Category: High Density Wire Duct

Steel, Cover, 2000 Series. Size: 5' Length. Gray

Category: Small 2-Piece Metallic Raceway Covers

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Gray. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Wireway, Wall Hanger, Material: Steel, Dimensions: 8" x 8"

Category: Wireway Support Hangers

Right angle fitting for use with LD5, LDPH5, and LDS5 raceway, Off White, ABS, Length 2.58 in.

Category: 1-Piece Non-Metallic Raceway Elbows

WMD 5007C-2RTGY DEEP DEVICE PLATE

Category: 2-Gang Raceway Device Brackets & Plates

Non-Metallic, Quarter Round Trim, 5000 Series. Size: 8' Length. PVC, Gray.

Category: 2-Piece Non-Metallic Raceway

2" Diameter, Corrugated Riser-Gard Innerduct, Orange. Includes: Pull String. No UV Protection, not suitable for outdoor use.

Category: Corrugated Riser Rated Innerduct

Steel, Supporting Clip, 3000 Series. Size: 2-13/16" Length, 3/4" Width. Ivory.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Protects wires from abrasion. Easily slips into open end of 1500 Series Raceway where it enters a fitting.

Category: Metallic Overfloor Raceway Clips & Couplings

Feed-Through NEMA Type 12 Hinged-Cover Wireway, Straight Section, Gasketed, Size: 2-1/2 Inch Width, 2-1/2 Inch Depth, 4 Foot Length, 14 Gauge Steel, ANSI 61 Gray Polyester Powder Finish. No Knockouts.

Category: NEMA 12 Wire Trough

Non-Metallic, Base Coupling, 5000 Series. Size: 2-13/16" Width, 4-9/16" Length. PVC, Ivory

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Double Gang Two-Piece Screw Together Deep Outlet Box, Accepts Pan-Way® Screw-On Faceplates Or Any NEMA Standard Double Gang Faceplate, For Use With Pan-Way® T-45 Or LD Profile Raceway, 5.19"L x 5.19"W x 2.75"H (131.9mm x 131.9mm x 69.8mm). Breakouts for 1/2", 3/4", or 1" Diameter Conduit

Category: 2-Gang Raceway Device Boxes

Steel, Base, 4000 Series., 10' Length, 5-1/2" Width, 2" Height, Galvanized

Category: Large 2-Piece Metallic Raceway Bases

Steel, Downward Duplex Device Bracket, 2400 Series, Ivory.

Category: 1-Gang Raceway Device Brackets & Plates

2 Inch P&C Corrugated Flexible Conduit, 250 Foot Reel

Category: Gray ENT Conduit

Non-Metallic, Blank End Fitting, PN05 Series. Size: 11/16" Length. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway End Fittings

Wire Duct, Vertical, Slotted, Channel, Front: H x W: 4" x 5", Length: 80", Color: Black. Includes: Cover.

Category: Special Purpose Wire Duct

2 Inch EMT Conduit, Steel, 20 Foot Length

Category: Straight Steel EMT Conduit