Search results

Multi-Tap connector, single-sided, clear insulation, 6 ports, 250 kcmil - #10 STR.

Category: Single Sided Entry Wire Connector Blocks

Bronze, service post connector, male, two cable, type SP2. #12 SOL - #8 STR, long.

Category: 1-Wire Service Post Connectors

Split bolt, aluminum dual rated, type SBA, 350 kcmil - #4 STR AWG.

Category: Aluminum Split Bolts

Multi-Tap connector, double-sided, clear insulation, 5 ports, 250 kcmil - #6 STR.

Category: Dual Sided Entry Wire Connector Blocks

Bronze grounding clamp, U-bolt, 2/0 SOL-250 kcmil copper conductor size range, 6" (152.4mm) iron pipe size.

Category: U-Bolt Ground Clamps

Thin wall PVC heat shrink, .09" (2.4mm) diameter, black cross-linked polyvinyl chloride, 100 ft. (30.5m) per reel.

Category: Thin Wall Heat Shrink

Multi-Tap connector, double-sided, clear insulation, 3 ports, 750 kcmil - 1/0 STR.

Category: Dual Sided Entry Wire Connector Blocks

Four-hole, aluminum, three barrel lug, type LAM3D, NEMA hole sizes and spacing, #6 AWG - 250 kcmil, 1/2 (12.7mm) stud hole.

Category: 4-Conductor Aluminum Mechanical Lugs

Hest Shrink Ring Terminal 12 – 10 AWG, 1/2" stud size.

Category: Heat Shrink Ring Tongues

3m(tm) 200 Amp Industrial Loadbreak Elbow?5810-b-1

Category: Loadbreak Elbows

VeriSafe Connection Kit for Tapping 8 to 4 AWG conductors. For use with VeriSafe Absence of Voltage Tester.

Category: Cable Lug & Split Bolt Mounting Hardware

THB SRG30-40 SIGNAL REF GRID

Category: Bare Wire Ground Clamps

VeriSafe Connection Kit for Tapping 2 to 2/0 AWG conductors.

Category: Cable Lug & Split Bolt Mounting Hardware

Crystal clear thin wall PVC heat shrink, 1.5" (38.1mm) diameter, 9.25" (235mm) length, clear polyvinyl chloride, 10 pc. package quantity.

Category: Thin Wall Heat Shrink

3M 5810-D-250

Category: Loadbreak Elbows

Bonding nut for threaded M6 rail fasteners.

Category: Bonding Connectors

Bonding nut for threaded M5 rail fasteners.

Category: Bonding Connectors

Ideal; Heat Shrinkable Tube; Thermo-shrink?; Thin-wall; Shrink Ratio: 2:1; Outside Diameter: 0.375 In; Thickness: 022 In; Length: 200 Ft; Volume Resistivity: 1014 Ohm Cm For Astm D 876 Test Method; Dielectric Strength: 20 Kv/mm For Astm D 150 Test Method; Continuous Operating Temperature: -55 To 125 Deg C; Minimum Shrink Temperature: 70 Deg C; Heat Shock: No Cracking For Ul 224(250 Deg C /4 Hours); Cable Range: 8 - 4 Awg; Nominal Recoveredi.d. (max.): 0.185 In; Expanded I.d.(min.): 0.421; Elongation At Break: 600 Pct For Astm D 638 Test Method; Elongation Of Break After Aging: 350 Pct For Ul 224 Test Method; Cold Bend Test (-55?c/4hours): No Cracking For Ul 224 Test Method; Copper Corrosion: Pass For Ul 224 Test Method; Chemical Resistance: Pass For Ul 224 Test Method; Longitudinal Shrinkage: 0 Plus Or Minus 5 Pct For Ul 224 Test Method; Eccentricity: 30 Pct For Ul 224 Test Method; Normal Size: 3/8 In; Package: Spool

Category: Thin Wall Heat Shrink

VeriSafe Connection Kit for Tapping 6 to 2 AWG conductors.

Category: Cable Lug & Split Bolt Mounting Hardware

Cast Bronze Ground Clamp for Wire Range 10 - 6, Water Pipe Size 1 1/4 - 2, Conduit Size 1/2 or 3/4 EMT, 1/2 Rigid

Category: Bare Wire Ground Clamps

Bronze, service post connector, female, two cables, type SPF2. #10 SOL - #3 STR.

Category: 2-Wire Service Post Connectors

Bronze, service post connector, female, two cables, type SPF2. #1 SOL - 4/0 STR.

Category: 2-Wire Service Post Connectors

#6 AWG (16mm²) jumper,90° bent lug on grounding strip side to straight lug on equipment.

Category: Bonding Jumpers

Crystal clear thin wall PVC heat shrink, 1" (25.4mm) diameter, 7.75" (196.9mm) length, clear polyvinyl chloride, 25 pc. package quantity.

Category: Thin Wall Heat Shrink