Search results

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 1 kV, Conductor Range: 2 AWG - 4/0 AWG, Shrink Ratio: 3:1, Insulation Diameter Range: 0.37" - 1.10", Relaxed Tube Length: 9". Provides: Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink

Terminal Plug, Copper, 3/0 AWG, Offset, CU/AL Rated

Category: Aluminum Pigtail Adapters

Compression Buttsplice, Copper, Tin Plated, 3 AWG, Long Barrel, 2.8 Inch Splice Length, Temperature Rating: 90 Deg C, Voltage Rating: 600 volts to 35 kV, Color Code White

Category: Long Barrel Copper Compression Sleeves

Wire Connector, Color Coded, Winged Twister® Type, Gray, Wire Range: 18 - 6 AWG, Package of 250. Includes: Internal Square Wire Spring. For Copper-to-Copper Connections Only., Wire-Nut®

Category: Color Coded Twist On Wire Connectors

6-PORT IN-SURE PUSH-IN WIRE CONNECTOR 200/JAR

Category: 6-Port Push-In Wire Connectors

Push-In Wire Connector, 2 Ports, 600V, Conductor Range: 20 to 12 AWG, Color: Red. Package of 300.

Category: 2-Port Push-In Wire Connectors

UF Direct Burial Splice Kit, 14-8 AWG, Heavy Wall Heat Shrink Sleeve, Aluminum

Category: Direct Burial Datacom Splice Kits

Power Distribution Block Cover, 3 Poles, Use W/ 163 Series Power Distribution Block, Thermoplastic, Clear

Category: Non-Insulated Connector Block Covers

Compression Lug, Copper, 2 Hole without Inspection Window, 1 AWG, 1/2" Stud, 1-3/4" Stud Hole Spacing, Long Barrel, Tin Plated.

Category: 2-Hole Long Barrel Copper Compression Lugs

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 1 kV, Conductor Range: 8 AWG - 1/0 AWG, Shrink Ratio: 3:1, Insulation Diameter Range: 0.20" - 0.80", Relaxed Tube Length: 9". Provides: Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink

Butt Splice With Expanded Entry, Vinyl Insulated, 12 - 10 AWG, Copper Tin Plated, Yellow

Category: Vinyl Insulated Butt Connectors

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 1 kV, Conductor Range: 3/0 AWG - 400 MCM, Shrink Ratio: 3:1, Insulation Diameter Range: 0.50" - 1.50", Relaxed Tube Length: 9". Provides: Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink

Push-In Wire Connector, 6 Ports, 600V, 18 to 12 AWG, Black, Order of 1 Each = 50 Connectors

Category: 6-Port Push-In Wire Connectors

Wire Connector, Winged, 22 to 14 AWG, 600 Volt, Color: Orange, For Copper Use Only, Bag of 500 Each

Category: Color Coded Twist On Wire Connectors

NSI 2-OT AL DBL LUG

Category: 2-Conductor Aluminum Mechanical Lugs

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 4, Wire Range: 14 AWG - 4 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

Rebar Ground Clamp, Direct Burial, Clamp Material: Bronze, Screw Material: Bronze, Wire Range: 10 AWG (Solid) - 2 AWG (Stranded), Rebar Size: 1/2" - 1". *Dottie Part # 67503.* For Use in Grounding Bare Copper Wire to Water Pipe, Rebar, Ground Rod or Copper Water Tubing.

Category: Rebar Ground Clamps

Insulated Ferrule, Single Wire DIN End Sleeve, 20 AWG, White, 15/32" Wire Strip Length, .09" Max Wire Insulation, Pack of 500

Category: Single Insulated Ferrules

Resin, Direct Burial Connector Sealing. Resin Is A 2-Part Epoxy Insulating And Encapsulating Resin. For Use With 3M Scotchcast O/B, R/Y, Y, R, G, B, 3M 212, 312 Or 512 Electrical Spring Connector

Category: Insulating & Sealing Compound

Heavy Duty 1 Cable Parallel Ground Connector for 3/8in 2/0-4 AWG. Pipe Made of high-copper-content alloy for grounding to 1/2" - 1" ground rods and ground pipes from 1/4" - 3 1/2" in parallel or 90 degree position. Suitable for direct burial in earth and concrete. Nuts and lockwashers are silicon bronze.

Category: U-Bolt Ground Clamps

Common earthing point for multiple electrical panels and devices. Includes busbar, insulators and brackets. Busbar has a BB hole pattern.

Category: Bus Bars

Quick Disconnect Terminal, Female, 14 - 16 AWG, Tin Plated

Category: Female Nylon Insulated Wire Disconnects

Compression Lug with Sight Hole, 4 AWG, 1-Hole Stud, Stud Diameter 1/4 Inch, Color Code Gray, Die Code 29, Copper With Tin Plating

Category: 1-Hole Copper Compression Lugs

Aluminum Split Bolt, (Run,Tap):: Al-Al: 6 AWG (Str), 6 AWG (Str) , Al-Cu: 10 AWG (Str), 10 AWG (Sol) , Cu-Cu: 6 AWG (Str), 10 AWG (Sol), Tin Plated.

Category: Aluminum Split Bolts