Search results

Eaton Crouse-Hinds series Condulet Form 7 conduit outlet body, Feraloy iron alloy, T shape, 3/4"

Category: Type T Iron Conduit Bodies

OZ-Gedney Type RB Reducing Bushing, Size: 1 X 1/2 IN, Steel, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 23/32 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups A, B,

Category: Steel Reducing Bushings

EMT Compression Connector, EMT, Straight, Steel, Threadless, 3/4 IN

Category: Steel Concrete Tight EMT Compression Connectors

Eaton Crouse-Hinds series Condulet Form 7 conduit outlet body, Feraloy iron alloy, LB shape, 3/4"

Category: Type LB Iron Conduit Bodies

Non-Metallic Liquidtight Conduit Connector, 3/4 IN Trade, 90 deg, Nylon 6, Gray, Natural

Category: 90 Degree Non-Metallic Liquidtight Flex Connectors

3 STEEL CONDUIT LOCKNUT

Category: Steel Conduit Locknuts

Conduit Hanger with Bolt, Diameter: 3/4 Inch, Steel, For Use With Rigid/IMC/EMT to Threaded Rod

Category: Conduit Clamps

OZ-Gedney Clip-On 170 Series Cover, 2 IN Hub, Form: 7, Screw-In Mounting, Stamped Steel Body, Zinc Electroplated Clips, Stainless Steel Screws, Finish: Pre-Galvanized Zinc, Connection: Clip-On, Third Party Certification: UL File Number E-18095, CSA 00

Category: Steel Conduit Body Covers

OZ-Gedney Type 14-G Pipe Strap, Malleable Iron, Finish: Hot Dip Galvanized, 1/4 IN Mounting Hole Width, 1 Holes, 3/4 IN Width, Length: 2-9/16 IN, 1-7/32 IN Height, Trade Size: 3/4 IN, Third Party Certification: CSA 009795, Applicable Third Party St

Category: Malleable Iron 1-Hole Conduit Straps

Conduit Bushing, Insulating, 2 Inch, Threaded, Impact Resistant, Rated 150° Celsius, Thermoplastic Phenolic, For Use with Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Eaton Crouse-Hinds series Condulet Series 5 conduit outlet body, Rigid/IMC, Copper-free aluminum, LB shape, Body, traditional cover and gasket, 3/4"

Category: Type LB Aluminum Conduit Bodies

Sealing Fitting, Vertical/Horizontal, 3/4 Inch, Explosion-Proof, 25% Fill, Female, Malleable Iron, For Use with Rigid/IMC Conduit

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Grounding Bushing, Insulated, Size: 3/4 Inch, Material: Malleable Iron, Lug: Aluminum, Threaded, Maximum Temperature Rating: 150° Celsius, For Use With Rigid/IMC Conduit, With Aluminum Lug, Outside Diameter: 1 7/16 Inch, Width: 1/2 Inch, Grounding Wire Size Minimum: 14 Wag

Category: Threaded Ground Bushings

Conduit Bushing, Insulating, 1 Inch, Threaded, Plastic, Rated 105° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

OZ-Gedney Type PLG Internal Recessed Threaded Insert Plug, Size: 3/4 IN, Steel, Connection: Threaded NPT, Body Thick: 1/2 IN, 1/2 IN Socket Size, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Listed For Hazardous

Category: Explosion-Proof Recessed Head Close-Up Plugs

Eaton Crouse-Hinds series EMT clamp, Steel, 1", Heavy gauge

Category: Steel 1-Hole Conduit Straps

1/2", Knockout Seal, Snap-In, Steel, Package of 100 Each

Category: Steel Knockout Seals

OZ-Gedney Type RB Reducing Bushing, Size: 1-1/4 X 1 IN, Steel, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 13/16 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups A, B

Category: Steel Reducing Bushings

Conduit Bushing, Insulating, 1-1/4 Inch, Threaded, Plastic, Rated 105° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Conduit Hardware, Couplings, Armored Cable, Type: Compression, Trade Size: 1 Inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concretetight

Category: Rigid Compression Couplings - Iron

OZ-Gedney Clamp Back, Size: 3/4 IN, 1/4 IN Thick, 1 Holes, Malleable Iron, Finish: Hot Dip Galvanized, Dimensions: 2-1/2 IN Length X 1-1/8 IN Width, 3/8 IN Hole, Dimension E: 9/16 IN X 7/16 IN, Third Party Certification: CSA 009795, Applicable Third

Category: Clamp Backs - Iron

Eaton Crouse-Hinds series EMT set screw type coupling, EMT, Zinc die cast, 1/2"

Category: Die Cast EMT Set Screw Couplings

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 3/4 IN, 1-3/4 IN Outside Diameter, Length: 1-5/8 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Pa

Category: Iron Rigid Conduit Three Piece Couplings

Conduit Bushings, Threaded, 2 Inch, Thermoplastic, For Use With Rigid/IMC Conduit and to Insulate Cables Passing Through Metal Boxes or Troughs

Category: Rigid & IMC Bushings