Search results

ROB PRHNIP-2-1/2X10 2-1/2X10 NIPPLE

Category: PVC Coated Nipples

Rob-r Prlb87sa 3 Al Form 7 Lb

Category: PVC Coated Type LB Conduit Bodies

Rob-r Prstag8 3 Al Knockout H

Category: PVC Coated Conduit Hubs with Ground

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Rob-r Pr5346gr 1-1/2 45 Lt Co

Category: 45 Degree PVC Coated Type LT Connectors

Rob-r Prsta7 2-1/2 Al Knockout

Category: PVC Coated Conduit Hubs

Rob-r Prunf705sa 2-1/2 Female-female

Category: PVC Coated Female-Female Unions

Rob-r Prlbd10900 4 Pulling El

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

Rob-r Pr5336gr 1-1/2 Straight

Category: Straight PVC Coated Type LT Connectors

RRY SPSPIN-IT-3/4

Category: Explosion-Proof Recessed Head Close-Up Plugs

Conduit Clamp Edge Style, Size: 3/4 inch, Material: PVC Coated Steel.

Category: PVC Coated Edge Beam Clamps

Rob-r Pruny705sa 2-1/2 Fem-male

Category: PVC Coated Female-Male Unions

Rob-r Prt77sa 2-1/2 Al Form 7

Category: PVC Coated Type T Conduit Bodies

Rob-r Prc78 2-1/2 Form 8 C Fi

Category: PVC Coated Type C Conduit Bodies

Rob-r Prt97 3-1/2 Form 7 T Fitting

Category: PVC Coated Type T Conduit Bodies

Female/Female Union, Size: 4 inch, Material: PVC Coated Steel.

Category: PVC Coated Female-Female Unions

Rob-r Prxjg74 2-1/2 Expansion

Category: PVC Coated Expansion Couplings

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type X Conduit Bodies

Plasti-Bond PVC coated strut nuts are used to assemble strut components and to secure coated all thread rod in a section of strut. These are available with or without a spring to aid in placement and assembly.

Category: PVC Coated Beam Clamps

ROB PREYD1SA 1/2 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples