Search results

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 4 IN, 5-1/2 IN Outside Diameter, Length: 3-3/4 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Par

Category: Iron Rigid Conduit Three Piece Couplings

OZ-Gedney Spec 5 Type C Conduit Body, 3 IN Hub, Length: 15-1/8 IN, 4-3/8 IN Width, 4-3/4 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (4/0 AWG) Conductors, 181 CU-IN Volume, Third Party Certi

Category: Type C Iron Conduit Bodies

OZ-Gedney Type KC Center Stopped 2-Screw Clamp Connector, Size: 1-1/4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1-9/32 - 1-5/8 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-7/8 IN Length X 2-13/16 IN Width, Third Party Certification: UL File Number E-11853 (Flexible Metal Conduit), E-11856 (Sheathed Cable), E-11858 (Service Entrance Cable), CSA 9795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable, Flexible Metal Conduit, Interlocked Metal Clad Cables, Non-Metallic And Service Entrance Cable

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type 7 Bushed Conduit Nipple, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 2-1/2 IN, 3-5/8 IN Outside Diameter, Connection: MNPS, 1-1/4 IN Thread Length, Flange Thickness: 3/8 IN, Third Party Certification: UL File Number E-1185

Category: Iron Chase Nipples

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight Straight Connector With Lug, Size: 2 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 6 - 1/0 AWG, Malleable Iron Body and Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, Hazardous Location, 3-3/4 IN Width, 2-1/8 IN Height, 2-3/16 IN Turning Radius Gland Nut, Third Party Certification: UL File Number E-24264, CSA 9795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type 4Q-T Liquid Tight Straight Connector, Size: 2 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 3-1/4 IN Width, 2-1/8 IN He

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 3-1/2 IN, Connection: Compression X MNPT Hub, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 5-1/2 IN Maximum Diameter X 2-5/8 IN Length, 1-3/16 IN Thread Length, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron

OZ-Gedney Spec 5 Type T Conduit Body, 1/2 IN Hub, Length: 5-3/8 IN, 1-3/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 4 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009

Category: Type T Iron Conduit Bodies

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Aluminum, 3/16 IN Height, 3-3/16 IN Width, Size: 2 IN, 11-1/2 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 009795 And 067549, Applicable Third Party St

Category: Aluminum Conduit Locknuts

Flexible Coupling, 3/4 Inch x 24 Inch Long, Explosion-Proof, Bronze End Fittings/Outer Braid, Maximum Temperature 300°F, For Use in Hazardous Locations to Isolate Conduit Systems From Vibration

Category: Explosion-Proof Type ECGJH Couplings

Grounding Bushing, 2",Threadless, Insulated, Set-Screw Connection Type, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Steel Clamping/Set Screws, Rated 150°Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threadless Ground Bushings

Conduit Bushings, Type: Capped, Trade Size: 3/4 Inch, Material: Malleable Iron/Zinc, For Use With Rigid/IMC Conduit

Category: Capped Bushings

Grounding Bushing, Insulated, Threaded, 1-1/2 Inch, Set-Screw Connection Type, Rated 150° Celsius, Malleable Iron/Zinc Bushing, Copper Lay-In Lug 14 - 4 AWG, Phenolic Insulator, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

1-1/4 IN COMBO A&BB BSHG

Category: Rigid & IMC Bushings

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2-1/4 IN Body Diameter X 5-1/2 IN Overall Length, 3 IN Turning Radius, 9 OZ Sealing Compound Required, 1/2 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

Conduit Hub, Type: Space-Maker, Size: 1-1/2 Inch, Insulated, Malleable Iron/Zinc

Category: Malleable Iron Conduit Hubs With Grounding

OZ-Gedney Type SR Gold Seal Strain Relief Straight Connector, Size: 1/2 IN, Conductor Range: 0.2 - 0.3 IN, Malleable Iron, PVC Grommets, Finish: Zinc Plated, 90 DEG C, Connection: MNPT, 0.52 IN Throat Inside Diameter, 9/16 IN Thread Length, Dimensi

Category: Straight Malleable Iron Cord Grips

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Aluminum, 3/16 IN Height, 1-13/16 IN Width, Size: 1 IN, 11-1/2 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 009795 And 067549, Applicable Third Party S

Category: Aluminum Conduit Locknuts

OZ-Gedney Type 4Q-T Liquid Tight Straight Connector, Size: 2-1/2 IN, Connection: Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 4-1/8 IN Width, 3 IN Height, Third Pa

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type C End Stopped Straight Squeeze Connector, Size: 3/8 IN (1/2 KO) IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1/2 - 19/32 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-1/8 IN Length X 9/16 IN Width, 7/16 IN Thread Length, Third Party Certification: UL File Number E-11852, UL Listed (Flexible Metal Conduit), CSA 009795 (Armored Cable), Hazardous Location: NEC 501-4(b), Class I, Division II, NEC 350-5 (Grounding Means), Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable And Flexible Metal Conduit

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type 14-G Pipe Strap, Malleable Iron, Finish: Hot Dip Galvanized, 3/8 IN Mounting Hole Width, 1 Holes, 1 IN Width, Length: 6-3/4 IN, 2-1/8 IN Height, Trade Size: 1-1/2 IN, Third Party Certification: CSA 009795, Applicable Third Party Sta

Category: Malleable Iron 1-Hole Conduit Straps

OZ-Gedney Spec 5 Type LL Conduit Body, 1/2 IN Hub, Length: 4-5/8 IN, 1-3/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 4 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA L

Category: Type LL Iron Conduit Bodies

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Aluminum, 3/16 IN Height, 1-7/16 IN Width, Size: 3/4 IN, 14 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 009795 And 067549, Applicable Third Party Stand

Category: Aluminum Conduit Locknuts

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 2-3/16 - 2-3/8 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 2 IN Length X 3-5/16 IN Width, 3/4 IN Threa

Category: Straight Squeeze Flex Connectors