Search results

1-1/4 IN COND HUB RMC/IMC INSU

Category: Malleable Iron Conduit Hubs

OZ-Gedney Type PLG Internal Recessed Threaded Insert Plug, Size: 2 IN, Copper-Free Aluminum, Connection: Threaded NPT, Body Thick: 3/4 IN, 1 IN Socket Size, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Listed F

Category: Explosion-Proof Recessed Head Close-Up Plugs

OZ-G 4Q-125FM 1-1/4 IN STR CO

Category: Steel Rigid To Liquidtight Combination Couplings

OZ-Gedney Type EFL Concrete Slab Electroform 90 DEG Conduit Insert, Size: 3/4 IN, Malleable Iron, Finish: Zinc Plated, Dimensions: 2-3/16 IN Base Diameter X 3-1/16 IN Base To Conduit Center X 3-11/16 IN Height, 3-13/16 IN Turning Radius, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA: C22.2 No.18, Federal Specification W-F-408E, For Concrete Slabs 6 IN Thickness And Up, Threaded Rigid Conduit And IMC

Category: Iron Rigid Conduit Elbows

1-1/4 IN 90 DEG CONN LFMC

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type AC 90 DEG Center Stopped Squeeze Connector, Size: 2-1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 2-3/4 - 3 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, 7/8 IN Thread Length, Dimension A: 6-1/4

Category: 90 Degree Two Screw Squeeze Flex Connectors

Conduit Bushing, Insulating, 6 Inch MNPT, Threaded, Impact Resistant, Rated 150° Celsius, Thermoplastic Phenolic, For Use with Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Wedge Anchor, 1/4 x 1-3/4 Long, Order of 1 Each = Pack of 100

Category: Malleable Iron EMT Parallel Type K-Clamps

Reducing Bushing, Steel, 1-1/2 x 1/2 Inch, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

AC/MC/Flex Connector, 90 Degree, Insulated, Type: Squeeze, Size: 1-1/4 Inch, Malleable Iron, For Use With Armored and Flexible Metal Conduit

Category: 90 Degree Two Screw Squeeze Flex Connectors

Conduit Hardware, Couplings, Armored Cable, Type: Set-screw, Trade Size: 1 Inch,for Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Iron Rigid Conduit Set Screw Couplings

Conduit Hub, Threaded, Size: 1 Inch, Material: Malleable Iron, For Use With Rigid/IMC Conduit, For Use With Rigid/IMC Conduit

Category: Malleable Iron Conduit Hubs

Conduit Hanger With Bolt & Nut, Size: 3/4 Inch, Steel/Zinc

Category: Conduit Clamps

Conduit Body, Type LL, 1-1/2 Inch Diameter, Form 7, Malleable Iron/Zinc

Category: Type LL Iron Conduit Bodies

EMT Expansion Fitting, Type AX, 4 Inch Diameter, 4 Inch Movement, Concrete Tight, Steel With Hot Dipped Galvanized Finish

Category: Steel EMT Expansion Fittings

Conduit Body, Type T, 1-1/2 Inch Diameter, Form 7, Malleable Iron/Zinc

Category: Type T Iron Conduit Bodies

Conduit Body, Type LR, 1 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type LR Iron Conduit Bodies

TX Expansion Coupling, 1 Inch Diameter, 4 Inch Movement, 2 Inch Outer Diameter, Steel With Hot Dipped Galvanized Finish, For Use With EMT Conduit

Category: Steel EMT Expansion Fittings

Features: Concrete Tight, Male Hub 5/8 In Thread, Application: Threadless Rigidconduit And Imc, Standard: Ul 514b, Fed Spec./cid: A-a-50553, Ansi/NEMA: Fb-1, Trade Size: 1.25in, Outside Diameter: 2.125in, Length: 1.5625in,material: Malleable Iron

Category: Iron Rigid Conduit Set Screw Connectors

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight Straight Connector With Lug, Size: 1-1/4 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 6 - 1/0 AWG, Malleable Iron Body and Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, Hazardous Location, 2-7/8 IN Width, 1.938 IN Height, 1-3/4 IN Turning Radius Gland Nut, Third Party Certification: UL File Number E-24264, CSA 9795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type 4Q-FM Combination Coupling, Trade Size: 2 IN, 3-1/4 IN Outside Diameter, Length: 2-1/4 IN, Flexibility: RMC And IMC, Malleable Iron, Steel Ferrule, Connection: Compression X FNPT Hub, Enclosure: NEMA 4, Third Party Certification: U

Category: Steel Rigid To Liquidtight Combination Couplings

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight Straight Connector With Lug, Size: 1-1/2 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 6 - 1/0 AWG, Malleable Iron Body and Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, Hazardous Location, 3-1/4 IN Width, 2 IN Height, 1-7/8 IN Turning Radius Gland Nut, Third Party Certification: UL File Number E-24264, CSA 9795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type CHM-T Raintight Conduit Hub, Size: 2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Male X 2-11-1/2 Tapered FNPT, Dimensions: 3-1/4 IN Diameter X 2 IN Length, Box Wall Thickness: 3/8 IN, Third Party Certification: UL F

Category: Malleable Iron Conduit Hubs

OZ-Gedney Clamp Back, Size: 1-1/2 IN, 5/16 IN Thick, 1 Holes, Malleable Iron, Finish: Hot Dip Galvanized, Dimensions: 3-15/16 IN Length X 1-1/2 IN Width, 9/16 IN Hole, Dimension E: 19/32 IN X 23/32 IN, Third Party Certification: CSA 009795, Applicabl

Category: Clamp Backs - Iron