Search results

Conduit Body, Type: TB, Size: 1 Inch, Spec 5, Material: Malleable Iron/Hot Dip Galvanized, For Use With Rigid/IMC Conduit

Category: Type TB Iron Conduit Bodies

2-1/2 IN ALUM LL COND BODY

Category: Type LL Aluminum Conduit Bodies

OZ-G SPLG-3500-2 CABLE SUPPOR

Category: Iron Rigid Conduit Cable Supports

3/4 IN VERT DRAIN SEALING FTG

Category: Explosion-Proof 25% Fill Male / Female Vertical Sealing Fittings

OZ-Gedney Type ICC Phenolic Insulating Coupling, Trade Size: 1-1/4 IN, 2 IN Outside Diameter, Length: 1-7/8 IN, Flexibility: RMC And IMC, Canvas Base Phenolic, Connection: Threaded, Black, For Rigid Conduit And IMC

Category: Bakelite / Phenolic Rigid Conduit Couplings

Grounding Bushing, Insulated, Threadless, Size: 1-1/2 Inch, Cable Range: 4 - 14 AWG, Malleable Iron

Category: Threaded Ground Bushings

3/4" COND BODY FORM7

Category: Type E Iron Conduit Bodies

Oz-g Sr9-506 1/2 .5-.6 Cord conn

Category: 90° Malleable Iron Cord Grips

Conduit Hardware, Bushings, Insulating, Trade Size: 1 Inch, Material: Malleable Iron or Steel/Zinc Plated, Connection Type: Set-Screw, Maximum Temperature Rating: 150 Degree C, Features: For Rigid and IMC, Outside Diameter: 1 5/8 Inch, Width: 3/4 Inch, Gr

Category: Threadless Ground Bushings

Conduit Body, Type: LL, Spec 5, Size: 1 Inch, Material: Malleable Iron/Hot Dipped Galvanized

Category: Type LL Iron Conduit Bodies

3-1/2 IN ALUM LB COND BODY

Category: Type LB Aluminum Conduit Bodies

Rigid Conduit Body, Access Opening Side, Configuration TA, Hub Location Tee Back, Number of Hubs 4, Hub Size 3/4 Inch, Size 6-1/4 Inch L x 2-7/8 Inch W x 2-5/8 Inch H, Installation Threaded, Material Zinc Electroplated Aluminum Enameled Gray Iron, Form Type Form 7, Approval UL 514A, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard Federal Specification A-A-50563, NEMA FB-1/FB-2.10, Capacity 9.5 Cu Inch

Category: Type TA Iron Conduit Bodies

OZG 28-075T 3/4" SSCR RGD CN

Category: Iron Rigid Conduit Set Screw Connectors

Conduit Body, Type: LL, Size: 3/4 Inch, Spec 5, Material: Malleable Iron/Hot Dip Galvanized, For Use With Rigid/IMC Conduit

Category: Type LL Iron Conduit Bodies

OZ-Gedney Type 15-G Conduit Strap, Malleable Iron, Finish: Hot Dip Galvanized, 1/4 IN Mounting Hole Width, 1 Holes, 3/4 IN Width, Length: 1-15/16 IN, 7/8 IN Height, Trade Size: 1/2 IN, Third Party Certification: CSA 9795, Applicable Third Party Stan

Category: Malleable Iron 1-Hole Conduit Straps

EMT Conduit Connector, Type 3/8 Inch Offset Set Screw, Trade Size 1/2 Inch, Diameter 5/8 Inch, Length 2-3/16 Inch, Thread Length 1/2 Inch, Material Zinc Plated Malleable Iron, Constructional Feature Concrete-Tight, Used On EMT Conduit, Applicable Standard Federal Specification W-F-406E, Includes Locknut

Category: Malleable Iron EMT Set Screw Connectors

OZ-Gedney Type EYAM Vertical/Horizontal Sealing Fitting, Size: 2-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered MNPT X Tapered FNPT, Dimensions: 2-3/4 IN Body Diameter X 8-1/2 IN Overall Length, 3-1/4 IN Turning Radius, 1

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

OZ-Gedney Type UNF Conduit Union, Trade Size: 2 IN, 3-3/4 IN Outside Diameter, Length: 2-9/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Tapered FNPT, Third Party Certification: UL File Number E-34997 Listed For Class I, Division 1,

Category: Explosion-Proof Type UNF Unions

OZ-Gedney Type EYM Vertical Sealing Fitting, Size: 3/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered MNPT X Tapered FNPT, Dimensions: 1-5/16 IN Body Diameter X 4-3/16 IN Overall Length, 2 IN Turning Radius, 1.75 OZ Sealing Com

Category: Explosion-Proof Male / Female (Vertical / Horizontal) Sealing Fittings

OZ-Gedney Type 2 Non-Grounding Conduit Bushing, Size: 2-1/2 IN, Malleable Iron, Finish: Zinc Plated, Connection: Threaded NPS, 3-3/16 IN Outside Diameter, 3/4 IN Width, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third

Category: Rigid & IMC Bushings

OZ-Gedney Type 15-G Conduit Strap, Malleable Iron, Finish: Hot Dip Galvanized, 1/4 IN Mounting Hole Width, 1 Holes, 3/4 IN Width, Length: 2-17/32 IN, 1-11/32 IN Height, Trade Size: 1 IN, Third Party Certification: CSA 9795, Applicable Third Party S

Category: Malleable Iron 1-Hole Conduit Straps

OZ-Gedney Type SBLG Insulated Grounding Bushing, Size: 4 IN, Malleable Iron Body, Stainless Steel Clamping Tension Body, Stainless Steel All Screws, Finish: Zinc Plated Body, Tin Plated Copper Grounding Saddle, Connection: Set-Screw Threadless,

Category: Threadless Ground Bushings

2-1/2 IN STR STRAIN RLF CONN

Category: Straight Malleable Iron Cord Grips

OZ-Gedney Type SR Dual Grommet Strain Relief Straight Connector, Size: 2-1/2 IN, Conductor Range: 1.625 - 2 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated

Category: Straight Malleable Iron Cord Grips