Search results

Conduit Bushing, Insulating, 3-1/2 Inch, Threaded, Impact Resistant, Rated 150° Celsius, Thermoplastic Phenolic, For Use with Rigid/IMC Conduit

Category: Rigid & IMC Bushings

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 13/32 IN Height, 5-1/4 IN Width, Size: 4 IN, 8 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC

Category: Gasketed Conduit Locknuts

Conduit Bushings, Threaded, 1-1/4 Inch, Thermoplastic, For Use With Rigid/IMC Conduit and to Insulate Cables Passing Through Metal Boxes or Troughs

Category: Rigid & IMC Bushings

OZ-Gedney Type SGN Solid Cover Sealing Gasket, Trade Size: 1-1/4 - 1-1/2 IN, Closed-Cell Neoprene, 100 DEG C, For Malleable Iron Conduit Bodies

Category: Neoprene Conduit Body Gaskets

OZ-Gedney Type SUBC Right Angle Conduit Clamp, 3 IN Cable, Cable Type: Rigid Conduit, IMC, EMT, Malleable Iron, Steel Nuts And Bolts, Finish: Clamp: Hot Dip Galvanized, Hardware: Mechanically Galvanized, For Securing Rigid Conduit, IMC or EMT Cond

Category: Malleable Iron EMT Right Angle Type K-Clamps

Grounding Bushing, 4 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 2/0 AWG, Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney Type KC Center Stopped 2-Screw Clamp Connector, Size: 3/4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 7/8 - 13/32 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-11/16 IN Length X 2-1/8 IN Width, Third Party

Category: Straight Squeeze Flex Connectors

Conduit Body, Type C, 3/4 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type C Iron Conduit Bodies

Features: Concrete Tight, Male Hub 7/32 In Thread, Application: Threadless Rigidconduit And Imc, Standard: Ul 514b, Fed Spec./cid: A-a-50553, Ansi/NEMA: Fb-1, Trade Size: 1in, Outside Diameter: 1.75in, Length: 1.4375in,material: Malleable Iron

Category: Iron Rigid Conduit Set Screw Connectors

Conduit Body, Type LB, 3/4 Inch Diameter, Form 7, Malleable Iron/Zinc

Category: Type LB Iron Conduit Bodies

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 11/32 IN Height, 4-1/8 IN Width, Size: 3 IN, 8 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Party Stan

Category: Gasketed Conduit Locknuts

OZ-Gedney Spec 5 Type T Conduit Body, Cover And Gasket Assembly, 1/4 IN Hub, Length: 6-1/8 IN, 1-5/8 IN Height, Conduit Body: Malleable Iron, Cover: Type BS Steel Zinc Electroplated, Gasket: Type SGN Neoprene, Finish: Aluminum Enamel, Connection: Tapered FNPT, 3 (6 AWG) Conductors, 7 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type T PVC Conduit Bodies

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Heavy Stock Steel, Finish: Zinc Plated, 3/16 IN Height, 2-1/4 IN Width, Size: 1-1/2 IN, 11-1/2 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 057250 And

Category: Steel Conduit Locknuts

OZ-Gedney Type ME-S Male Enlarger, Size: 5/8 IN, Steel, Finish: Zinc Electroplated, Connection: 3/4 IN FNPT X 1/2 IN MNPT, Dimensions: 1-3/16 IN Maximum Diameter X 1-9/16 IN Length, Third Party Certification: UL File Number E-34997, Class I, Divis

Category: Conduit Enlargers

OZ-Gedney BS-S Series Domed Top Design Cover, 1/2 IN Hub, Screw-In Mounting, Pre-Galvanized Stamped Steel, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL

Category: Steel Conduit Body Covers

Conduit Body, Type T, 1 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type T Iron Conduit Bodies

Features: Physical Dimension 2 1/4 In Length X 1 1/2 In Diameter, Application: Rigid Conduit, Imc, Standard: Ul 886, Csa C22.2, Nec, Mil. Spec: Mil-f28675, Size: 0.5in, Material: Steel, Finish: Zinc Electroplated

Category: Explosion-Proof Type UNY Unions

Puling Elbow, 90°, Female/Female, Size: 1-1/2", Raintight, Material/Finish: Malleable Iron/Zinc

Category: Iron Rigid Conduit Elbows

Threaded Conduit Locknut, 1-1/4 Inch, Heavy Stock Steel, Zinc Plated, for Rigid Conduit & IMC, 3/16" Thick.

Category: Steel Conduit Locknuts

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 3/4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 29/32 - 1-5/64 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-1/8 IN Length X 1-3/4 IN Width, 1/2 IN T

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 1-1/2 IN, 2-5/8 IN Outside Diameter, Length: 2-5/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Thir

Category: Iron Rigid Conduit Three Piece Couplings

OZ-Gedney Type 9000W EMT Combination Coupling, Trade Size: 1 IN, 1-7/8 IN Outside Diameter, Length: 2 IN, Flexibility: EMT And Flexible Steel Conduit, Malleable Iron, Connection: Compression X Screw Clamp, Third Party Certification: UL File Number

Category: Malleable Iron EMT To Flex Combination Couplings

Features: 4 Cubic In, Tapered Threaded Hub, Application: Rigid Conduit, Imc, Standard: Ul 514a, Csa C22.2, Fed Spec: A-a-50563, NEMA: Fb-1, Fb-2.10, Hub Size: 0.5in, Form: Lb, Length: 4.625in, Width: 1.375in, Material: Malleable Iron, Finish: Zinc Electroplated Aluminum Enamel

Category: Type LB Iron Conduit Bodies

Conduit Bushing, Insulating, 2 Inch, Threaded, Thermoplastic Phenolic, Rated 150° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings