Search results
4,498 Found
Eaton B-Line
Four Hole Corner Plate, Flat Fitting, 3-1/2" Width, 5-3/8" Height, Steel With Zinc Finish
Item #: 68581
CAT #: B143ZN
UPC: 781011504632
Company wide:
Appleton
Sealing Fitting, Vertical/Horizontal, 3/4", Explosion-Proof, Malleable
Item #: 11956
CAT #: EYF-75
UPC: 781381135122
Company wide:
Power-Strut
Square Washer, Flat, 1/2", Steel, Electro-Galvanized
Item #: 80169
CAT #: PS-619-1/2-EG
UPC: 702316501423
Company wide:
Appleton
Reducing Bushing, Threaded, Malleable, 3" x 2-1/2"
Item #: 58585
CAT #: RB300-250
UPC: 781381655552
Company wide:
Arlington
MC/AC Cable Connector, Snap-In, 3/8", Insulated, Zinc Die Cast
Item #: 785740
CAT #: 38RAST
UPC: 018997135865
Company wide:
Eaton B-Line
Conduit Clamp, 1/2" Diameter, Pre-Assembled, Steel/Zinc
Item #: 271763
CAT #: B2008PAZN
UPC: 781011610142
Company wide:
nVent Caddy
MC/AC cable to stud clip, 1/8" max flange, 14-2 to 10-3 MC/AC
Item #: 21311
CAT #: MAC2
UPC: 782856326373
Company wide:
nVent Caddy
Single Piece Strut Clamp for Cable/Conduit, 1"–1.51" OD, 1 1/4" EMT 1" Rigid
Item #: 20673
CAT #: SCH20B
UPC: 782856255208
Company wide:
Power-Strut
Square Washer, Flat , 1/4"
Item #: 80372
CAT #: PS-619-1/4-EG
UPC: 702316501195
Company wide:
Power-Strut
Four Hole Open Angle, 45°, Steel/Electro-Galvanized
Item #: 80233
CAT #: PS-781-45-DEG-EG
UPC: 702316501362
Company wide:
nVent Caddy
Cable/Conduit Clip, 1", 1 1/4" EMT, 3/4", 1" Rigid, 1.654" Max
Item #: 47522
CAT #: K20
UPC: 782856245209
Company wide:
nVent Caddy
Cable/Conduit to stud attachment, 1" EMT, 2 1/8" box depth
Item #: 48379
CAT #: CS16
UPC: 782856588238
Company wide:
Appleton
Grounding Bushing, 2", Threaded, Insulated, Malleable Iron
Item #: 58496
CAT #: GIB-200L-4AC
UPC: 781381091169
Company wide:
Appleton
Grounding Bushing, 1", Threaded, Insulated, Malleable Iron
Item #: 58550
CAT #: GIB-100L-4AC
UPC: 781381091107
Company wide:
Power-Strut
Rigid Strut Strap, 3-1/2", Steel, Electro-Galvanized
Item #: 116422
CAT #: PS-1100-AS-3-1/2-EG
UPC: 702316503489
Company wide:
Power-Strut
Spring Nut, Long Spring, Size: 1/2-13, Steel/Electro-Galvanized
Item #: 80262
CAT #: PS-RS-1/2-EG
UPC: 702316501348
Company wide:
Power-Strut
Strut Post Base, Single, 6" X 6" X 3-1/2", Steel/Electro-Galvanized
Item #: 80438
CAT #: PS-3033-EG
UPC: 702316501065
Company wide:
nVent Caddy
Angle Bracket, Steel, PG, 0.25" Holes
Item #: 20661
CAT #: AB
UPC: 782856261001
Company wide:
Power-Strut
Strut Strap, Rigid/IMC, , 1-1/4", Steel
Item #: 180841
CAT #: PS-1100-AS-1-1/4-EG
UPC: 702316502994
Company wide:
nVent Caddy
Cable/Conduit to stud attachment, 1/2", 3/4" EMT, 1 1/2" box depth
Item #: 21330
CAT #: CS812
UPC: 782856326069
Company wide:
OZ Gedney
Conduit Bushing, Insulating, 2-1/2", Threaded, Thermoplastic Phenolic
Item #: 255121
CAT #: A-250
UPC: 783126003185
Company wide:
nVent Caddy
Snap Close Conduit to Rod/Wire Clip 1/2"-3/4" EMT 0.71–1.18"OD 1/4" Rod #12 Wire
Item #: 80801
CAT #: 4Z34812M
UPC: 782856502104
Company wide:
nVent Caddy
Single Piece Strut Clamp for Cable/Conduit, 1.74"–2.2" OD, 2" EMT 1 1/2" Rigid
Item #: 47394
CAT #: SCH32B
UPC: 782856252375
Company wide:
nVent Caddy
Cablecat 3/4" J-hook with rod/wire clip 1/8"–3/8" flange, 1/4" rod
Item #: 48066
CAT #: CAT124Z34
UPC: 782856333104
Company wide:
Eaton B-Line
Four Hole Corner Plate, Flat Fitting, 3-1/2" Width, 5-3/8" Height, Steel With Zinc Finish
Four Hole Corner Plate, Flat Fitting, 3-1/2 Inch Width, 5-3/8 Inch Height, Steel With Zinc Finish
Item #: 68581
CAT #: B143ZN
UPC: 781011504632
Category:
Flat Plate Strut Channel Connectors
Made in USA
Company wide:
Appleton
Sealing Fitting, Vertical/Horizontal, 3/4", Explosion-Proof, Malleable
Sealing Fitting, Vertical/Horizontal, 3/4 Inch, Female, 25% Fill, Malleable Iron, For Use With Rigid/IMC Conduit in Close Turing Radius.
Item #: 11956
CAT #: EYF-75
UPC: 781381135122
Made in USA
Company wide:
Power-Strut
Square Washer, Flat, 1/2", Steel, Electro-Galvanized
Square Washer, Flat, 1/2", Steel/Electro-Galvanized
Item #: 80169
CAT #: PS-619-1/2-EG
UPC: 702316501423
Category:
Strut Channel Washers
Made in USA
Company wide:
Appleton
Reducing Bushing, Threaded, Malleable, 3" x 2-1/2"
3" to 2-1/2", Reducing Bushing, Threaded, Bushing Material: Malleable Iron.
Item #: 58585
CAT #: RB300-250
UPC: 781381655552
Category:
Iron Alloy Reducing Bushings
Made in USA
Company wide:
Arlington
MC/AC Cable Connector, Snap-In, 3/8", Insulated, Zinc Die Cast
MC/AC Cable Connector, Snap-In, 3/8 Inch, Insulated, Range: 0.405 - 0.605 Inch, Material: Zinc Die Cast
Item #: 785740
CAT #: 38RAST
UPC: 018997135865
Category:
Single Barrel MC / AC Connectors
Made in USA
Company wide:
Eaton B-Line
Conduit Clamp, 1/2" Diameter, Pre-Assembled, Steel/Zinc
Conduit Clamp, 1/2 Inch Diameter, Pre-Assembled, Steel With Zinc Finish, For Use With Rigid/IMC Conduit
Item #: 271763
CAT #: B2008PAZN
UPC: 781011610142
Category:
Strut Channel Rigid Conduit Clamps
Made in USA
Company wide:
nVent Caddy
MC/AC cable to stud clip, 1/8" max flange, 14-2 to 10-3 MC/AC
Snap-In Support, MC/AC Cable Flexible Conduit, Metal or Wood Stud and Up to 1/8 Inch Flange, Standard Packaging Quantity: 100.
Item #: 21311
CAT #: MAC2
UPC: 782856326373
Category:
MC/AC Cable to Wire/Rod & Beam
Made in USA
Company wide:
nVent Caddy
Single Piece Strut Clamp for Cable/Conduit, 1"–1.51" OD, 1 1/4" EMT 1" Rigid
One Piece Strut Clamp, With Back Plate. EMT 1-1/4"; Rigid 1". Static Load Limit: 200 lbs. Standard Packaging Quantity: 100.
Item #: 20673
CAT #: SCH20B
UPC: 782856255208
Category:
Strut Channel One Piece Pipe Clamps
Made in USA
Company wide:
Power-Strut
Square Washer, Flat , 1/4"
1/4" Square Washer Electro-Galvanized.
Item #: 80372
CAT #: PS-619-1/4-EG
UPC: 702316501195
Category:
Strut Channel Washers
Made in USA
Company wide:
Power-Strut
Four Hole Open Angle, 45°, Steel/Electro-Galvanized
Open Angle Connector, 4 Holes, 45 Degree, Bolt Hole Diameter 9/16 Inch, Steel With Electro Galvanized Finish.
Item #: 80233
CAT #: PS-781-45-DEG-EG
UPC: 702316501362
Category:
Open Angle Strut Channel Connectors
Made in USA
Company wide:
nVent Caddy
Cable/Conduit Clip, 1", 1 1/4" EMT, 3/4", 1" Rigid, 1.654" Max
Conduit Hanger 1-1/4" EMT and Smaller Rods or Flanges. Standard Packaging Quantity: 100.
Item #: 47522
CAT #: K20
UPC: 782856245209
Category:
Conduit Hangers From Wire/Rod & Beam
Made in USA
Company wide:
nVent Caddy
Cable/Conduit to stud attachment, 1" EMT, 2 1/8" box depth
Cable/Conduit to Stud Attachment, 1" EMT, 2 1/8" Box Depth. Standard Package Quantity: 100.
Item #: 48379
CAT #: CS16
UPC: 782856588238
Category:
Conduit to Stud Supports
Made in USA
Company wide:
Appleton
Grounding Bushing, 2", Threaded, Insulated, Malleable Iron
2", Insulated Ground Bushing, Threaded, Bushing Material: Malleable Iron, Lug Material: Aluminum. Wire Size: 14 AWG (Solid) - 4 AWG (Stranded). For Copper or Aluminum Grounding.
Item #: 58496
CAT #: GIB-200L-4AC
UPC: 781381091169
Category:
Threaded Ground Bushings
Made in USA
Company wide:
Appleton
Grounding Bushing, 1", Threaded, Insulated, Malleable Iron
1 Inch, Insulated Ground Bushing, Threaded Type:, Bushing Material: Malleable Iron, Lug Material: Aluminum. Wire Size: 14 AWG (Solid) - 4 AWG (Stranded). For Copper or Aluminum Grounding.
Item #: 58550
CAT #: GIB-100L-4AC
UPC: 781381091107
Category:
Threaded Ground Bushings
Made in USA
Company wide:
Power-Strut
Rigid Strut Strap, 3-1/2", Steel, Electro-Galvanized
Standard Strut Strap, Diameter: 3-1/2", Material: Steel, Finish: Electro-Galvanized, Thickness .125". For use with: GRC, IMC, SCH 40/SCH 80 Conduit.
Item #: 116422
CAT #: PS-1100-AS-3-1/2-EG
UPC: 702316503489
Category:
Strut Channel Rigid Conduit Clamps
Made in USA
Company wide:
Power-Strut
Spring Nut, Long Spring, Size: 1/2-13, Steel/Electro-Galvanized
Channel Nut W/ long spring, Thread Diameter: 1/2", Material: Steel, Finish: Electro-Galvanized. For Use w/ PS 200, 210, 300.
Item #: 80262
CAT #: PS-RS-1/2-EG
UPC: 702316501348
Category:
Strut Channel Spring Nuts
Made in USA
Company wide:
Power-Strut
Strut Post Base, Single, 6" X 6" X 3-1/2", Steel/Electro-Galvanized
Post Base, 4 Holes Bottom Plate, Bolt Hole Diameter 9/16 in, Material: Steel, Finish: Electro-Galvanized, Use with PS 200, 210
Item #: 80438
CAT #: PS-3033-EG
UPC: 702316501065
Category:
Post Base Strut Channel Connectors
Made in USA
Company wide:
nVent Caddy
Angle Bracket, Steel, PG, 0.25" Holes
Angle Bracket w/ 1/4" hole. Standard Packaging Quantity: 100.
Item #: 20661
CAT #: AB
UPC: 782856261001
Category:
Rod & Wire Hangers
Made in USA
Company wide:
Power-Strut
Strut Strap, Rigid/IMC, , 1-1/4", Steel
Standard Pipe Clamp, Diameter: 1-1/4", Material: Steel, Finish: Electro-Galvanized, Thickness .75". For use with: GRC, IMC, SCH 40/SCH 80 Conduit.
Item #: 180841
CAT #: PS-1100-AS-1-1/4-EG
UPC: 702316502994
Category:
Strut Channel Rigid Conduit Clamps
Made in USA
Company wide:
nVent Caddy
Cable/Conduit to stud attachment, 1/2", 3/4" EMT, 1 1/2" box depth
Screw on conduit support; attaches 1/2" and 3/4" EMT, conduit, MC/AC to metal or wood stud for 1 1/2 deep box. Standard Packaging Quantity: 100.
Item #: 21330
CAT #: CS812
UPC: 782856326069
Category:
Conduit to Stud Supports
Made in USA
Company wide:
OZ Gedney
Conduit Bushing, Insulating, 2-1/2", Threaded, Thermoplastic Phenolic
Conduit Bushing, Insulating, 2-1/2 Inch, Threaded, Impact Resistant, Rated 150° Celsius, Thermoplastic Phenolic, For Use with Rigid/IMC Conduit
Item #: 255121
CAT #: A-250
UPC: 783126003185
Category:
Rigid & IMC Bushings
Made in USA
Company wide:
nVent Caddy
Snap Close Conduit to Rod/Wire Clip 1/2"-3/4" EMT 0.71–1.18"OD 1/4" Rod #12 Wire
Multi-plus 1/2" or 3/4" conduit - Wire Size #12 wire thru 1/4" - Flange Size 1/8"-3/8". Standard Packaging Quantity: 100.
Item #: 80801
CAT #: 4Z34812M
UPC: 782856502104
Category:
Cable/Conduit From Drop Wire Support
Made in USA
Company wide:
nVent Caddy
Single Piece Strut Clamp for Cable/Conduit, 1.74"–2.2" OD, 2" EMT 1 1/2" Rigid
One Piece Strut Clamp, With Back Plate. 2" EMT; 1-1/2" Rigid. Static Load Limit: 350 lbs. Standard Packaging Quantity: 50.
Item #: 47394
CAT #: SCH32B
UPC: 782856252375
Category:
Strut Channel One Piece Pipe Clamps
Made in USA
Company wide:
nVent Caddy
Cablecat 3/4" J-hook with rod/wire clip 1/8"–3/8" flange, 1/4" rod
J-Hook With Rod/Wire Clip, 3/4 Inch, Accommodates 1/4 Inch Rod, #12 - 18 Wire Size, Steel With Pregalvanized Finish
Item #: 48066
CAT #: CAT124Z34
UPC: 782856333104
Category:
J-Hook From Wire/Rod & Beam
Made in USA
Company wide:
4,498 Items found