Fittings

Beam Clamp, 1/4"-20 Tap, 3/4 Inch Jaw, Steel

Category: Beam Clamps - Adjustable

Eaton Crouse-Hinds series Chico A sealing compound, 115 Cu In

Category: Explosion-Proof Sealing Cement

Connector, Compression, Zinc Die Cast, Size 1/2 Inch

Category: Zinc Die Cast Concrete Tight EMT Compression Connectors

2 IN SEALING LOCKNUT

Category: Gasketed Conduit Locknuts

RIGID/INTERMEDIATE GRADE CONDUIT COMPRESSION FITTINGS, 3 IN TRADE SIZE STRAIGHT

Category: Rigid Compression Connectors - Iron

Conduit Hub, Type: Grounding, Insulated, Wateritight, Size: 2-1/2 Inch, Material: Zinc Die Cast

Category: Die Cast Conduit Hubs With Grounding

PS 793: Four Hole Closed Angle Connector , PS 793 45 DEG EG

Category: Closed Angle Strut Channel Connectors

OZ-Gedney Type RB Reducing Bushing, Size: 1-1/4 X 3/4 IN, Steel, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 13/16 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups A,

Category: Steel Reducing Bushings

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-5/8 IN Body Diameter X 4-3/8 IN Overall Length, 2-7/16 IN Turning Radius, 3.75 OZ Sealing Compound Required, 1/8 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

Drop Threaded Rod with Shot-Fire Bracket, 72", 1/4" Rod

Category: Rod & Wire Hangers

Liquidtight Connector, 3-1/2 Inch, Straight, Malleable Iron

Category: Malleable Iron Liquidtight Flex Connectors

Threaded Conduit Nipple, 1-1/2 Inch x 6 Inch, Aluminum, For use with Rigid Threaded Conduit

Category: Aluminum IMC Conduit Nipples

Flat Plate Tee Fitting, 4 Hole, 3-1/2 x 5-3/8 Inch, Steel With Electro-Galvanized Finish

Category: Flat Plate Strut Channel Connectors

3/4 TO 1/2 RIGID CONDUIT REDUCER STEEL

Category: Steel Reducing Bushings

1/2" Rigid Threaded LB Type Conduit Bodies with Covers and Gaskets

Category: Type LB Aluminum Conduit Bodies

Eaton Crouse-Hinds series NMC clamp type connector, Zinc die cast, 1-1/4"

Category: Zinc Die Cast NM Cable Connectors

Box/Conduit Hanger Support, Horizontal/Vertical Mounting, Fits Up to 12 Inch x 12 Inch Boxes

Category: Conduit Hangers From Wire/Rod & Beam

Rigid Conduit Strap, 1-Hole, 3 Inch, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Liquidtight Strain Relief Cord and Cable Connector, 1 Inch Hubs Cable Range 0.625 - 0.750 Inch, Steel, Color Code: Orange

Category: Straight Steel Cord Grips

Conduit Hub, 1/2 Inch, Insulated, Gasketed, Watertight, Aluminum, For Use With Rigid/IMC Conduit

Category: Aluminum Conduit Hubs

Compression Coupling, Diameter 2-1/2 Inch, Raintight, Concrete-Tight Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel Raintight EMT Compression Couplings

1/2" PVC Conduit Cap.

Category: PVC Conduit Caps

Cdy 3000050eg Beam Clamp 1/2

Category: Beam Clamps - Adjustable

Conduit Body, Type: LL, "R" Series, Size: 2 1/2", Material: Die Cast Aluminum. Includes: Cover & Gasket

Category: Type LL Aluminum Conduit Bodies