Fittings

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight Straight Connector With Lug, Size: 4 IN, Connection: Tapered MNPT Hub, Conductor Range: 1 - 4/0 AWG, Malleable Iron Body and Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, Hazardous Location, 6-1/2 IN Width, 3-1/2 IN Height, 3-5/8 IN Turning Radius Gland Nut, Third Party Certification: UL File Number E-24264, CSA 9795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Conduit Body, LR, 1/2 Inch, Aluminum, Epoxy Powder Coat Finish, For Use With Rigid/IMC Conduit

Category: Type LR Iron Conduit Bodies

Blanking Plug, Male Thread Size: 1 Inch NPT, Nickel Plated Brass, For Use With Cable Glands

Category: Metric Cable Gland Adapters

APP 737DT2T35 ADPTR M 3/4NPT

Category: Metric Cable Gland Adapters

Earth Tag, 1-1/4 Inch, Nickel Plated Brass, For Use With Cable Glands

Category: Cable Gland Earth Tags

1/2 inch EMT 2-Piece Zinc Die-cast Connector. 1/2 inch Trade size and 1/2 inch KO.

Category: Zinc Die Cast Concrete Tight EMT Compression Connectors

Branch Line Restraint Structure Attachment to Threaded Hole, 3/8", 1/2" Rod

Category: Rod & Wire Hangers

Anti- Rotation Corner Angle, 2 Holes, Hole Diameter: 9/16 in, 90°, Material: Steel, Finish: Electro Galvanized.

Category: 90 Degree Strut Channel Corner Connectors

Conduit/Box to T-Grid Support, 1/4 Inch Hole, Threaded, Steel.

Category: Acoustical T-Grid Ceiling Snap On Fixture / Box Hangers

3/4 Inch Steel; Liquidtight Strain Relief Cord and Cable Connectors: 90°; Color Coded Label: N/A; Cable Range 0.500-0.625

Category: 90° Steel Cord Grips

Plastic Electrical Drop Wire Securing Clip, 1/4" Hole

Category: Rod & Wire Hangers

Threaded Conduit Nipple, 6 Inch x Close, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Square Washer, Size: 1/4", Material: Steel, Finish: Galv-Krom.

Category: Strut Channel Washers

Standard Strut Strap, Diameter: 1 1/2", Material: Aluminum, Finish: Aluminum., Aluminum Fastners, For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Conduit Strut Strap - Aluminum

1 Inch Sealing IP Washer, NPT, Material: Nylon, Box Quantity: 50. For Use With Cable Glands.

Category: Cable Gland Entry Thread Seals

Cable to Flange Clip, Bottom Mount, 9/16 Inch – 3/4 Inch Flange, 14-2 to 10-3 MC/AC, Material/Finish: Steel.

Category: MC/AC Cable to Wire/Rod & Beam

OZ-Gedney Ground-Tite Type 4Q-L Grounding Liquid Tight Straight Connector With Lug, Size: 1/2 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 14 - 4 AWG, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA

Category: Malleable Iron Liquidtight Flex Connectors

Conduit Strap, 1 Hole, Size: 2 Inch, PVC Coated

Category: PVC Coated 1-Hole Conduit Straps

Bell Reducer, Threaded, 1 Inch to 1/2 Inch, Explosion-Proof, Material: Malleable Iron.

Category: Explosion-Proof Threaded Bell Reducing Couplings

Beam Clamp, 5/16-18 Rod, 3/4 IN THK, 300 LB Load, Steel, Electro Plated

Category: Beam Clamps - Adjustable

Coupling, Compression, Conduit Size 1/2 Inch, Length 1-1/2 Inch, Width 1-3/32 Inch, Die Cast Zinc

Category: Zinc Die Cast EMT Set Screw Couplings

Eaton B-Line series conduit support fasteners, Conduit and cable, 1" Height, 1" Length, 1" Width, 0.08lbs, Conduit size: 1", Guide-Rite conduit fasteners

Category: Conduit Hangers From Wire/Rod & Beam

THB PC-3/4HDG PC BEAM CLP OD1

Category: PVC Coated Beam Clamps

TC GR4W 1"GROUND STRAP

Category: Steel 1-Hole Armored Cable Straps