Fittings

UNIVERSAL GROMMET

Category: Metal Stud Bushings

Sealing Fitting, Female, Explosion-Proof/Dust-Ignitionproof, Vertical, 40% Fill, 1 Inch, Aluminum, For Use With Rigid/IMC Conduit

Category: Explosion-Proof Female Vertical Sealing Fittings

Conduit Body With Cover and Neoprene Gasket, Type: T, Size: 1-1/4 Inch, Aluminum

Category: Type T Aluminum Conduit Bodies

Corner Angle Fitting W. Channel Guide, 90°, 2 Holes, Bolt Hole Diameter: 9/16 in, Material: Steel. Finish: Zinc Plated.

Category: 90 Degree Strut Channel Corner Connectors

OZ-Gedney Type EYA Vertical/Horizontal Sealing Fitting, Size: 1-1/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-7/8 IN Body Diameter X 5-1/16 IN Overall Length, 2 IN Turning Radius, 6 OZ Sealing Compound

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight Straight Connector With Lug, Size: 1 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 14 - 4 AWG, Malleable Iron Body and Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, Hazardous Location, 2-3/8 IN Width, 1-3/4 IN Height, 1-7/16 IN Turning Radius Gland Nut, Third Party Certification: UL File Number E-24264, CSA 9795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Sealing Fitting, Vertical, 1 Inch, Explosion-Proof, 25 % Fill, Female, Malleable Iron, For Use with Rigid/IMC Conduit

Category: Explosion-Proof Female Vertical Sealing Fittings

Watertight Grounding Hub, Insulated, Gasketed, 2-1/2 Inch, Aluminum Die Cast

Category: Aluminum Conduit Hubs With Grounding

2" COMB. CUPLG LT TO RGD

Category: Steel Rigid To Liquidtight Combination Couplings

RIGID/INTERMEDIATE GRADE CONDUIT COMPRESSION FITTINGS, 2-1/2 IN TRADE SIZE STRAIGHT

Category: Rigid Compression Connectors - Iron

Tee, Type: C x C x C - WROT, Size: 3/4 Inch, Material: Copper

Category: Plumbing Pipe Tees

3/4" Clampback

Category: Clamp Backs - Steel

Connector, Screw-In, Zinc Die Cast, Flex Size 1-1/2 Inch

Category: Screw-In Flex Connectors

Tee, Type: C x C x C - WROT, Size: 1/2 Inch, Material: Copper

Category: Plumbing Pipe Tees

3/4IN RIGID RAINTIGHT CONN-INSUL-MAL IRON-10/100PK

Category: Steel Rigid Conduit Compression Connectors

Cord Grip Connector, 1/2", Straight, Cord Size: .385 Inch, Aluminum

Category: Straight Aluminum Cord Grips

Rigid Compression Connector, 1 Inch Diameter, Threadless, Raintight, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel Raintight EMT Compression Connectors

Threaded Conduit Nipple, 1/2 Inch x 4-1/2 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Channel Nut W/O spring, Thread Diameter: 3/8", Material: Steel, Finish: Electro-Galvanized. For Use w/ PS 100, 150, 200, 210, 300, 400

Category: Strut Channel Nuts

Threaded Conduit Nipple, 2 Inch x 3-1/2 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Conduit Body With Cover and Gasket, Type C, 1-1/2" Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type C Iron Conduit Bodies

Standard Pipe Clamp, Diameter: 3/4", Material: Steel, Finish: Stainless Steel. For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Strut Channel Rigid Conduit Clamps

2 1/2 inch, Liquidtight 90° Connector - Zinc Die-Cast

Category: 90 Degree Die-Cast Zinc Liquidtight Flex Connectors

Pulling Elbow, Capped, 90 Degree, 1 Inch, Explosion-Proof, Dust-Ignitionproof, Aluminum, For Use With Threaded Metal Conduit

Category: Explosion-Proof Aluminum Pulling Elbows