Fittings

Twin Screw zinc die-cast all-purpose 1/2" knockout connector for Flex, AC, MCI, and NM cable. Secures into knockout with a locknut. Has a cable range of 0.600" to 0.825" and an end stop of 0.615".

Category: Straight Squeeze Flex Connectors

Chase Nipple, 2 Inch, Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples

Liquidtight Connector, 90°, 2 inch, UV Rated Plastic, Sealing Ring, Material: Non-Metallic, For Non-Metallic Liquidtight - Type B; Flexible Non-Metallic Tubing, UL, CSA

Category: 90 Degree Non-Metallic Liquidtight Flex Connectors

J-Hook, Diameter: 2", Steel, 50 Pack

Category: J-Hook - Screw-On

Flat Fitting, 4 Hole, Length 7-1/4 Inch, Steel, Steel With Electro Galvanized Finish

Category: Flat Plate Strut Channel Connectors

Threaded Conduit Nipple, 2-1/2 Inch x Close, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Eaton Crouse-Hinds series rigid/IMC clamp, Steel, 3/4", Heavy gauge

Category: Steel 1-Hole Conduit Straps

Sealing Cement, 16 Ounce/1 LB Can, Set Volume: 23.0 Cubic Inches

Category: Explosion-Proof Sealing Cement

Liquidtight Connector, 90°, 3/4 Inch, Material: Malleable Iron, Insulated.

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Liquidtight Sealing Gasket, 3/4 Inch, Steel Retainer With Elastomer Seal, STG Series Sealing Gaskets Provide A Seal Between Shoulder of Connector and Sheet Metal Enclosure

Category: Liquidtight Connectors - Accessories

Knockout Seal, 1-1/2", Snap-In, Steel

Category: Steel Knockout Seals

Conduit Strap, 1/2 Inch Diameter, Heavy Gauge, Steel, For Use With EMT Conduit

Category: Steel 1-Hole Conduit Straps

1/2 Inch Steel; Liquidtight Strain Relief Cord and Cable Connector: Straight; Color Coded Label: Purple; Cable Range 0.375-0.500

Category: Straight Steel Cord Grips

Reducer Bushing, Diameter 3/4 x 1/2 Inch, PVC

Category: PVC Reducers

Insulated Liquidtight Connector, 1/2 Inch, 90 Degree, Malleable Iron

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Conduit Support Hanger, 2 Inch Diameter, Polypropylene, Gray, Pack of 10 Each

Category: Snap Lock Pipe Hangers

3/8 inch, MC/AC Cable Connector, Two Screw, Cable Range: .225 to .612 Inch, Zinc Die Cast

Category: All Purpose Cable Connectors

Strut EMT Clamp, 1-1/4 Inch, 1-1/4 x 2.88 x 3.18 Inch, Assembled, Steel With Electro-Galvanized Finish

Category: Strut Channel EMT Conduit Clamps

EMT Compression Coupling, 3/4 Inch Diameter, Raintight, Screw-On, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel Raintight EMT Compression Couplings

Conduit Body, Type: LB, FM7, Size: 1-1/2", Material: Grayloy Iron.

Category: Type LB Iron Conduit Bodies

Tee Plate, 4 Holes, Length: 5 3/8 Inch, Bolt Diameter: 9/16 Inch, Material: Steel, Finish: Electro Plated Zinc.

Category: Flat Plate Strut Channel Connectors

Dust Tight Cord Grip, 1/2" NPT Dust Tight 0.40-0.54"

Category: Single / Double Weave Strain-Relief Grips

Reducing Bushing, 1 Inch to 3/4 Inch, Threaded, Bushing Material: Aluminum.

Category: Aluminum Reducing Bushings

Zinc die-cast, 1/2" knockout saddle-type connector with spring set screw for securing aluminum and steel cable. Secures into knockout with a zinc die-cast. Concrete tight when taped. Supports .530 to .790 cable range with a .620 end stop diameter.

Category: Single Barrel Saddlegrip MC / AC Connectors