Fittings

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 1 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1-9/32 - 1-7/16 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-3/16 IN Length X 2-3/

Category: Straight Squeeze Flex Connectors

Pulling Elbow, Male/Female, 90°, Size: 1/2 Inch, Raintight, Malleable Iron

Category: Iron Rigid Conduit Elbows

CL E948L 3 PVC REPAIR SLEEVE

Category: PVC Repair Couplings

COND BDY&GSKT&CVR ASY

Category: Type LR Iron Conduit Bodies

Rigid Stainless Steel 316 Compression Male Connector 1/2" Trade SizeFor Rigid

Category: Rigid Compression Connectors - Stainless Steel

THB BGA125-14-20 1 1/4 INCH G

Category: Threadless Ground Bushings

nVent CADDY Quick Clip Rod Stiffener, 3/8" Rod

Category: Rod & Wire Hangers

THB TS102-SS 3/4EMT ONE HOLE

Category: Steel 1-Hole Conduit Straps

Compression Coupling, Raintight, Conduit Size 2 Inches, Material Zinc Plated Steel, For use with EMT Conduit

Category: Steel Concrete Tight EMT Compression Couplings

Right Angle Conduit Clamp, 1 Inch, RC, Right Angle, Steel, For Use With 1 Inch Conduit or Pipe

Category: Malleable Iron EMT Right Angle Type K-Clamps

Cord Connector, Low-Profile, Strain Relief, 1/2 Inch, Size: 0.100 - 0.300 Inch, Black, Non-Metallic

Category: Straight Low Profile Non-Metallic Cord Grips

Bracket, 45°, 2-Hole, Length: 18 Inch, Material/Finish: Steel/Zinc

Category: Strut Channel Brackets

Strain Relief Straight Liquidtight Cord Connector, 1-1/2 IN, 1.39-1.65 IN Openings, Nylon

Category: Straight Non-Metallic Cord Grips

Offset Nipple, Material: Malleable Iron, Finish: Zinc Plated, Trade Size: 1 IN, Outside Diameter: 3/4 IN, Flexibility: Rigid And IMC, Connection: Male Threaded, Thread Length: 1/2 IN, Standard: UL 514B, UL File Number E14814, CSA C22.2 No. 18.3, CSA 065178, NEMA FB-1, For Box To Box Connection Of Knockouts

Category: Zinc Die Cast Offset Nipples

Appleton Rb50-25a Alum Red Bu

Category: Aluminum Reducing Bushings

Stud Spanner Bar Clip, Spring Steel, Rod Size: 1/4"

Category: Through Stud Cable/Conduit Supports

Channel Nut W/ long spring, Thread Diameter: 3/8", Material: Aluminum, Finsish: Aluminum. For Use w/ PS 200, 210, 300.

Category: Strut Channel Spring Nuts

Grounding Bushing, 1",Threadless, Insulated, Set-Screw Connection Type, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Steel Clamping/Set Screws, Rated 150°Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threadless Ground Bushings

THB 2557 ZINC STR RELIEF CONN

Category: Straight Die Cast Zinc Cord Grips

Conduit to Beam Clamp, Rigid: 3/8", EMT: 3/8", Flange: 1/4 - 1/8 Inch, Steel/Zinc

Category: Flange-Mount Cable/Conduit Clips

Rod/Wire Clip, #12 Wire to 1/4 Inch Rod, Flange 1/8 - 3/8 Inch, Steel

Category: Cable/Conduit From Drop Wire Support

1-1/4 Inch Erickson Coupling, Aluminum, for Use with Rigid/IMC Conduit

Category: Aluminum Rigid Conduit Three Piece Unions

1/2" ENT Form Stubby, Black, KWIKON

Category: ENT Vertical Stub Downs

IMC/Rigid Conduit Body, Access Opening Left/Right Side, Configuration L, Cover Type Zinc Electroplated Chromate Epoxy Powder Coated Grayloy Iron, Hub Location 90 Deg, Number of Hubs 2, Hub Size 1/2 Inch, Size 4.56 Inch L x 2.25 Inch W, Installation Threaded, Material Zinc Electroplated Chromate Epoxy Powder Coated Gray Iron Body, Neoprene Gasket, Stainless Steel Screw, Form Type Form 7, Approval UL 514A/514B/E2527, CSA C22.2, Used On IMC/Rigid Conduit, Applicable Standard NEC/CEC, NEMA FB-1, Capacity 5 Cu Inch

Category: Type L Iron Conduit Bodies