Fittings

Type T Conduit Body, 3/4 Inch, Aluminum, Form 5, Threaded for Rigid/IMC, Includes Cover/Gasket

Category: Type T Aluminum Conduit Bodies

Liquidtight Sealing Gasket, 1 Inch, Steel Retainer, Santoprene Rubber Seal

Category: Liquidtight Connectors - Accessories

Ranger Strain Relief Straight Liquidtight Cord Connector 3/4 IN Trade, 1/2-5/8 IN Openings, Die Cast Zinc

Category: Straight Die Cast Zinc Cord Grips

Non-Hazardous Location Drain, 3/4 Inch, Raintight, Aluminum, Suitable for Class I Division II

Category: Explosion-Proof Universal Drains / Breathers

Reversible Beam Clamp - Rod Size 3/8", Max 1-1/4" Flange, Cast Iron With Electro-Galvanized Finish

Category: Beam Clamps - Reversible

1/4" Square Washer Electro-Galvanized.

Category: Strut Channel Washers

Conduit Body Cover, Type Screw-On/Flat Cover, Form 35, Diameter 2 Inch, Stamped Steel, Furnished With Stainless Steel Fastening Screws

Category: Steel Conduit Body Covers

Conduit Body Cover with Neoprene Gasket, Type: FM-In-Place, FM7, Size: 1-1/2", Material: Stamped Steel.

Category: Steel Conduit Body Covers With Gaskets

Non-Metallic Liquidtight Conduit Connector, 3/4 IN Trade, 90 deg, Nylon 6, Gray, Natural

Category: 90 Degree Non-Metallic Liquidtight Flex Connectors

Rigid Strut Clamp, 3/4 Inch, Steel With Electro-Galvanized Finish

Category: Strut Channel Rigid Conduit Clamps

Conduit Body, Type: LL, Size: 3/4", Material: PVC. Includes: Cover & Gasket.

Category: Type LL PVC Conduit Bodies

EJ10 1IN PVC EXPANSION JOINT KRALOY

Category: PVC Expansion Couplings

PVC Primer, Low-VOC, 1 Quart, Purple, For Use With PVC and CPVC

Category: PVC Cement

3/4 Emt Steel Compression Connector

Category: Steel Concrete Tight EMT Compression Connectors

Pulling Elbow, 1/2 Inch, 90°, Gasketed, Female To Female, Watertight, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Iron Rigid Conduit Elbows

Grounding Bushing, 3-1/2 Inch, 6 AWG - 250 MCM Lay-In Lug, Rated 150° Celsius, Malleable Iron/Zinc Plated Bushing, Aluminum Lay-In Lug Dual Rated CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Conduit Body, Type: C, FM7, Size: 1/2", Material: Grayloy Iron.

Category: Type C Iron Conduit Bodies

Liquidtight Connector, 90 Degree, 1-1/2 Inch Diameter, Zinc Die Cast, For Use With Liquidtight Flexible Metal Conduit & Type B Non-Metallic Conduit

Category: 90 Degree Die-Cast Zinc Liquidtight Flex Connectors

UF Cable Connector, 3/4 Inch, 8/3 - 6/3 Range, Die Cast, For Use With Underground Feeder (UF) Cable to Provide a Non-Watertight Connection to Meters and Enclosures

Category: Zinc Die Cast NM Cable Connectors

Uninsulated Chase Nipples Die Cast Zinc, 1-1/2 In. Trade Size

Category: Zinc Die Cast Chase Nipples

Hub Size: 3/4 Inch NPT, Straight Male Cord Connector, Cord Range: 0.63 Inch - 0.75 Inch, Form Size: F3, Material & Finish: Machined Aluminum, Color Code: Yellow.

Category: Straight Aluminum Cord Grips

Eaton Crouse-Hinds series Condulet Series 5 conduit outlet body, Rigid/IMC, Copper-free aluminum, LB shape, Body, traditional cover and gasket, 3/4"

Category: Type LB Aluminum Conduit Bodies

Liquidtight Connector, 1 Inch, Nylon 6, Non-Metallic, Gray, For Use With Non-Metallic Type B Conduit

Category: Straight Non-Metallic Liquidtight Flex Connectors

Two Hole Corner Angle, 1-5/8 Inch x 2-1/4 Inch, Steel/Electro-Galvanized

Category: 90 Degree Strut Channel Corner Connectors