Grounding Products

OZ-Gedney Type ABG Specification Grade Ground Connector, Conductor Size: 2/0 AWG - 250 KCMIL, Length: 2 IN, Size: Ground Rod Size: 5/8 IN Or 3/4 IN, Ground Pipe Size: 3/8 IN, Copper Alloy, 1-7/8 IN Height, 2-5/8 IN Width, Third Party Certificatio

Category: Bare Wire Ground Clamps

C-Tap Connector, Wire Range: 4 AWG to 2 AWG, 5/8 Inch Rod, Copper

Category: Grounding Grid Connectors

Fence Post Grounding Connector, U-Bolt, Copper Alloy, For Parallel or 90 Deg. Connection, Pipe Size: 1-1/2 Inch, 2/0 AWG to 250 MCM, For Copper Conductors Only, Suitable for Direct Burial

Category: U-Bolt Ground Clamps

Fence Post Grounding Connector, U-Bolt, Copper Alloy, For Parallel or 90 Deg. Connection, Pipe Size: 1 Inch, 4 AWG to 2/0 AWG, For Copper Conductors Only, Suitable for Direct Burial

Category: U-Bolt Ground Clamps

Permaground Aluminum Ground Clamp, Dual Rated, Conductor Range 1/0-14, Pipe Sizes 1/2 to 1in, UL

Category: Bare Wire Ground Clamps

Lay-in Lug, with Washer, Electrical Equipment Bond, 14 to 6 AWG, 1/4 Inch Hole, Copper With Tin Plating, 1/4 Inch Hardware Included

Category: Bare Wire Ground Clamps

Grounding Braid, 12 Inch Length, 16mm Width, Tin-Plated Copper

Category: Metallic Grounding Braids

GROUNDING TERMINAL W/

Category: Insulated Ground Bars

5/8 Inch x 8 Foot Ground Rod, Copper Bonded

Category: Copper Ground Rods

Ground Clamp, Water Pipe: 1-1/4 to 2 Inch, Wire Range: 10 Solid to 2 Stranded AWG, Connects Copper Ground Wire to Water Pipe/Copper Tubing/Ground Rods, Bronze

Category: Bare Wire Ground Clamps

Steel Ground Plate, EG, HDC58 Connector, 16" x 10" x 1/4"

Category: Ground Plates

OZ-Gedney Type GH Swivel Ground Hub, Conductor Size: 4 - 2/0 AWG, Length: 1-1/4 IN, Size: 3/4 IN, Malleable Iron, Screws: Steel, Finish: Hot Dip Galvanized, Screws: Zinc Electroplated, 1-11/16 IN Height, Dimension B: 1-7/8 IN, Dimension D: 3/8 IN, Third Party Certification: UL File Number E24264, Applicable Third Party Standards: UL 467, Federal Specification W-F-406E, For Use With Universal Ground Clamps To Connect Grounding Conductors Run Bare, In Armor Or In Conduit

Category: Ground Clamps With Hub

Ground Bus Bar 1/4" x 2" x 12". Number of Mounting Positions: (6) 1/4" Stud Holes With 5/8" Hole Spacing (3) 3/8" Stud Holes With 1" Spacing. Pre-assembled with brackets and insulators attached for quick installation

Category: Bus Bars

Ground Clamp, Water Pipe: 1/2 to 1 Inch, Wire Range: 10 to 2 AWG, Connects Copper Ground Wire to Water Pipe/Copper Tubing/Ground Rods, Bronze

Category: Bare Wire Ground Clamps

Lightning protection Cast Two Bolt Beam Bonding Clamp. This Cast Two Bolt Beam Bonding Clamp is Copper and has a 1" (25.4 mm) max flange thickness.

Category: Bonding Connectors

GND CLAMP STEEL #6-2/0CU 1/8IN-5/8IN STEEL

Category: Tower Ground Clamps

3/4" Grounding Wedge, Bronze With Tin Plating, For Use With Rigid/IMC Conduit

Category: Ground Wedges

long life, mechanical strength, corrosion resistance, galvanic, dissimilar metals, 304 SS. 304 SS Ground Rod, Pointed, 3/4" x 10'.

Category: Stainless Steel Ground Rods

Sectional Ground Rod Coupling, Copper, 5/8"

Category: Ground Rod Couplings

Waterpipe Mallable Iron Ground Clamp for Wire Range 6 - 2, Water Pipe Size 1/2, 3/4, 1, or rebar 4 - 10

Category: U-Bolt Ground Clamps

Bus Bar, Copper, 32 Holes, 16" L, 4" W, 1/4" T

Category: Bus Bars

Ground Connector / Water Pipe Clamp, U-Bolt Type, Suitable for Direct Burial, Copper Alloy, Pipe Size : 6 Inch to 1 Inch, 4 to 4/0 AWG Ground, Silicon Bronze Hardware

Category: U-Bolt Ground Clamps

Ozg 8-in Mall Grnd Clamp

Category: U-Bolt Ground Clamps

Service Post Connector, Copper, Two Conductor, 8 to 2 AWG, 3/8 Inch Stud, Direct Burial Rated

Category: Structural Grounding Studs