Grounding Products

O-Z/Gedney G-350G Universal Ground Clamp, 8 to 2 AWG Conductor, 7/8 in THK Bar, Malleable Iron

Category: U-Bolt Ground Clamps

nVent ERICO copper bonded rods combine the strength of steel for ease of installation and molecularly bonded copper, with roll threading process for long lasting corrosion resistance. 3/4" x 10' ground rod with 10 mil plating thickness.

Category: Copper Ground Rods

Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 2-1/2"-3-1/2" Pipe, 3/8" Stud.

Category: U-Bolt Ground Clamps

Extra Heavy Duty Direct Burial Ground Clamp for up to 1in Pipe This incredible ground clamp can handle just about any size ground wire and just about any application. UL Listed for direct burial in earth and concrete, it can be used with rebar, water pipe, copper tubing and ground rods up to 1 inch in diameter. Assembled with tough, 304 stainless steel screws. Will accommodate ground wires from 8 AWG to 4/0 AWG. cULus Listed Grounding and Bonding.

Category: Bare Wire Ground Clamps

Threadless compression coupler for use with pointed copper-bonded ground rods. Silicon Bronze, 3/4" dia.

Category: Ground Rod Couplings

Neutral Bar, Copper, 4.37" Long, 14 - 4 AWG

Category: Bus Bars

Copper Compression Connector, 2 AWG(Str)-2/0 AWG(Str), 3/4" Ground Rod.

Category: Ground Rod Ground Clamps

Pigtail Wire Connector, Green, 12 AWG stranded 8 in. w/#10 Fork & Stripped End, Wire-Nut® (Order of 1 = Bag of 25)

Category: Stranded Wire Ground Pigtails

GROUND ROD PROTECTOR 5/8 TINNED

Category: Ground Rod Couplings

5/8IN X 8FT FULL SIZE GALV GROUND ROD

Category: Galvanized Ground Rods

Steel City Drawn Style Utility Box Extension Ring, 1 Gang, 4 IN L x 2-1/8 IN x 1-7/8 IN D, Steel

Category: Solid Wire Ground Pigtails

Waterpipe Ground Clamp for Wire Range 4 - 4/0, Water Pipe Size 2 1/2 - 3 1/2 , Bronze Saddle with Steel U-Bolt

Category: U-Bolt Ground Clamps

Compression Cross Grid Connector, 250 - 500 MCM or 5/8 - 3/4 Inch Ground Rod or #5-#6 Rebar Run and 2 AWG - 250 MCM Tap, Copper

Category: Grounding Grid Connectors

C-Tap Connector, Wire Range: 250 AWG to 500 MCM Run, 4 AWG to 2 AWG Tap; Copper

Category: Grounding Grid Connectors

Service Post Connector, Copper, Two Conductor, 2 to 1/0 AWG, 1/2 Inch Stud, Direct Burial Rated

Category: Structural Grounding Studs

Fence Post Grounding Connector, U-Bolt, Copper Alloy, For Parallel or 90 Deg. Connection, Pipe Size: 2 Inch, 2/0 AWG to 250 MCM, For Copper Conductors Only, Suitable for Direct Burial

Category: U-Bolt Ground Clamps

Bare Wire Ground Clamp, GC Series, 2-1/2 - 4 Inch, 10 - 2 AWG, 6.38 Inch Length, 0.33 Inch Hole Diameter, Clamp Range 2.73 - 5.94 Inch, Bronze

Category: Bare Wire Ground Clamps

Dual Rated Ground Clamp, Clamp Material: Aluminum, Screw Material: Steel, Wire Range: 6 AWG (Solid) - 250 MCM, Pipe Size: 1-1/4" - 2"

Category: Bare Wire Ground Clamps

Structural Steel Grounding Connector, 1/0 AWG, 5/8" rod.

Category: Structural Grounding Studs

Earth rail, horizontal, for TS, TS IT, SE, supply includes: Earth rail made from E-Cu 57 to DIN EN 12 163, DIN EN 13 601, 15 x 5 mm, 20 connection points with M5 screws, 2 earth connections 25 mm¦, 2 isolators, Assembly parts, description: Potential equalisation rail, current carrying capacity approx. 200 A.

Category: Bus Bars

Braid Grounding Copper Jumper

Category: Bonding Jumpers

Fence Post Grounding Connector, U-Bolt, Copper Alloy, For Parallel or 90 Deg. Connection, Pipe Size: 3 Inch, 2/0 AWG to 250 MCM, For Copper Conductors Only, Suitable for Direct Burial

Category: U-Bolt Ground Clamps

Fence Post Grounding Connector, U-Bolt, Copper Alloy, For Parallel or 90 Deg. Connection, Pipe Size: 1-1/2 Inch, 4 AWG to 2/0 AWG, For Copper Conductors Only, Suitable for Direct Burial

Category: U-Bolt Ground Clamps

OZG GH-75B GNDG HUB

Category: Ground Clamps With Hub