Search results

Eaton CH 3/4 in Loadcenter Accessories, Neutral Flush Cover For Loadcenters 125A And Below, X1

Category: Copper Bus Load Center Covers

1, 2 & 3-Pole Handle Lock, Padlockable, Used with Cable-In/Cable-Out Quicklag Circuit Breakers.

Category: Cable-In / Cable-Out Circuit Breaker Handle Locks

125 AMP, 120/240V AC, 1-Phase, Plug On Neutral, Main Lug Loadcenter, 24-Space, 48-Pole, Copper Bus, NEMA 3R - Rainproof. Surface Mount. Dims: H: 21", W: 14.31", D: 3.88"

Category: 1-Phase Main Lug Copper Bus Load Centers

Primary Fuse Block. Holds one 2 Pole 13/32" x 1 1/2" Fuse Block. Terminal Block and Fuse Block are rated for wire sizes: 10 - 22 gauge. Includes two 6" long #14 gauge wire. For use with SBE Series Industrial Control Transformers. Includes: Finger Safe Cover Kit.

Category: Transformer Primary Fuse Kits

40 Amp, Power Supply. SDN-P Series. 3-Phase, Input Voltage, 380 - 480 Volt AC & 450 - 820 Volt DC, Output Voltage, 24 Volt DC, Rated Output Current: 40 Amps, 960 Watts

Category: 3-Phase DC Power Supplies

30 AMP, 2-Pole, Heavy Duty Safety Switch, Fusible, 240 VAC, 250 VDC, NEMA 1. Uses: FRN-R Series Fuses. Enclosure Dims: H: 10.81", W: 6.38", D: 3.75".

Category: 2-Pole 240 Volt Fused Heavy Duty Safety Switches

CTL Quadplex Breaker, 2-Pole, 10 kAIC, 2-Pole 20 Amp Outer Common Trip and 2-Pole 20 Amp Center Common Trip, Requires (2) 1-inch spaces, Wire Size #14-4, 120/240 VAC. ***For BR Series Loadcenters***

Category: Residential Quadplex Circuit Breakers

Lockoff For BRCAF115 Style Breakers, ***Breakers Sold Separately***

Category: Padlockable Circuit Breaker Handle Locks

6-Pole Base Mounting Plate - Suitable for mounting six 1-pole, three 2-pole and two 3-pole breakers.

Category: Cable-In / Cable-Out Circuit Breaker Base Mounting Clips

Mechanical Interlock. For use with Type BR Breakers. Use with 2, 3 and 4-Pole Breakers.

Category: Load Center Mechanical Interlocks

Handle Tie. Used with Quicklag Series Circuit Breakers for physically joining the handles of two adjacent 1-Pole Breakers.

Category: Circuit Breaker Handle Ties

225 Amp, 2-Pole, Type CH, Loadcenter, Main Breaker, Bolt-On, 25 kAIC, 120/240 Volt AC ***Includes Line Side Lugs Only, Use Item MCBL300 For Load Lugs***

Category: 2-Pole Main Circuit Breakers

Meter Accessory, Blank Cover, Lexan, Used with 1MP, 1MM and 3MM, Modular Metering Stacks without Tabs

Category: Meter Covers

400 AMP, 2-Pole, General Duty Safety Switch, Cartridge Fuse Type, Fusible with Neutral, 240 VAC, NEMA 3R. Uses: FRN-R Series Fuses. Enclosure Dims: H: 45.19", W: 23.00", D: 7.27".

Category: 2-Pole 240 Volt Fused General Duty Safety Switches

Meter Pack, Ring Style Meter Socket Covers, 1-Phase, 2 Meter Sockets, 120/240V AC, 125 AMP Socket Rating, 200 Amp Bus Rating, Aluminum Bus, Bottom Feed / Top Feed. ***Requires (2) Plug-on Type Main Tenant Circuit Breaker (Type BR, BRH or BRHH). Includes: Main Lugs (Replacement Lugs are not Available)***

Category: Group Metering Meter Packs

Flush Mount EZ Trim. Gray Painted Steel Trim. H x W: 72" x 20". Not compatible with YS Boxes

Category: Panelboard Trims

PRX Main Circuit Breaker Kit, PDG23G Circuit Breaker Type, 480 Volt, 35KAIC, 150 Amp

Category: Panelboard Main Breaker Kits

Series Rating Kit Includes Series Rating Book and Adhesive Sleeve and Series Rating Sticker. If Panelboard is Being Series Rated Higher than the Base Rating, an SRK is Required.

Category: Load Center Circuit Labels

CCV Breaker, 200A, 3 Pole, 120/240V, 10kAIC, Load Lugs Only

Category: 3-Pole Main Circuit Breakers

Communications, I/O Relay Card, Passive, Dry Contact, SDU CF, 3.3 Volts

Category: Uninterruptable Power Supply Interface Devices

30 Amp, 3-Pole Series C NEMA F-Frame Molded Case Circuit Breaker, Type HFD, 65 kAIC, 600 VAC, 250 VDC, Fixed Thermal-Magnetic Trip. Includes: Load Terminals only.

Category: 600V Rated Molded Case Circuit Breakers

Handle Tie, Molded Plastic Handle. Used with BR Type Circuit Breakers for physically joining the handles of three adjacent 1-Pole Breakers.

Category: Circuit Breaker Handle Ties

200 AMP, 2-Pole, General Duty Double Throw Safety Switch, Non-Fusible, 240 VAC, 250 VDC, NEMA 3R, Includes Neutral. Enclosure Dims: H: 37.38", W: 19.56", D: 11.25"

Category: 2-Pole 240 Volt Non-Fused Double Throw Safety Switches

30 Amp, 3-Pole Series C Motor Circuit Protector, Type HMCP, F-Frame, Intermediate Magnetic, 600 VAC, 250 VDC, 90 - 300 Fixed Thermal-Magnetic Trip. Standard Magnetic Style with Line & Load Steel Body Terminals (3T100FB).

Category: Molded Case Motor Circuit Protectors