"motor circuit protectors"

ABB's General purpose encapsulated open core, and coil transformer (also known as Type IP Control Power transformers) are ideally suited for industrial and light-duty loads, HVAC applications, signal and alarm systems, industrial control panels, lighting, and circuit isolation. The optional fuse block adapter kits enable input and output flexibility. Type IP Control Power transformers are an economical alternative to high in-rush/machine tool transformers.

Category: 250 - 450 VA Industrial Control Transformers

12V, 0.5-75 Watts, 1-Circuit Magnetic Transformer 120 VAC

Category: Magnetic Lighting Transformers

Abb; Power Supply; Voltage Rating: Input: 90 - 264 Vac/120 - 375 Vdc, Output: 24vdc; Amperage Rating: Input: 1120 Milamp At 115 Vac, 660 Milamp At 230 Vac, Output: 2.5 Amp At Less Than Or Equal To 55 Deg C; Wattage: 60 Wtt; Frequency Rating: 47 - 63 Hz; Phase: 1 Ph; Fuse Rating: 2 Amp At 250 Vac Slow Acting; Material:plastic Housing; Efficiency: 86 Pct; Insulation: Rated Insulation Voltage Ui: Input/output - 4 Kvac; Cable Size: Fine Strand With Wire End Ferrule: 24 - 14 Awg(input/output), Rigid: 24 - 12 Awg (input/output); Enclosure: Ip20; Environmental Conditions: Operating Temperature: -40 To 70 Deg C, Rated Load: -40 To 55 Degc, Storage Temperature: -40 To 85 Deg C, Damp Heat, Cyclic: (4) 24 Hr Cycles, 40deg C, 95 Pct Rh; Width: 71 Mm; Height: 91 Mm; Control Time: Less Than 1 Ms; Current Limiting At Short Circuit: 65 Amp; Power Failure Buffering Time: 60 Ms; Rise Time: 1 Ms; Wire Strip Length: 7 Mm; Power Consumption: 69.3 Wtt At 110 Vac, 70.1 Wtt At 230 Vac; Inrush Current Limiting: 60 Amp; Depth: 57.5 Mm; Tighteningtorque: 0.7 N-m

Category: 1-Phase DC Power Supplies

BCPMSC, PowerLogic, Power Monitoring, Advanced, Multi-Circuit, Energy Meter, 42 Split Core CTs, 90 - 277 Volt AC, 50 Amp, 2 Cables

Category: Split Core Current Transformers

Remote Mount Magnetic Transformers, 1 Circuit, 60W Maximum Rating, 120 Volt, 12V AC, Black

Category: Magnetic Lighting Transformers

GEN 5K49JN6124S

Category: Transformer Cooling Systems

350 VA, 1-Phase, 460/230/208, 480/240, 440/220/200V Primary Volts - 115/24, 120/25, 110/23 Secondary Volts. Control Circuit Transformer with Primary and Secondary Fuse Blocks. For use with type CC Fuses.

Category: 250 - 450 VA Industrial Control Transformers

750 VA, 1-Phase, 460/230/208, 480/240, 440/220/200V Primary Volts - 115, 120, 110 Secondary Volts. Control Circuit Transformer with Primary and Secondary Fuse Blocks. For use with type CC Fuses.

Category: 500 - 800 VA Industrial Control Transformers

250 VA, 1-Phase, 460/230/208, 480/240, 440/220/200V Primary Volts - 115/24, 120/25, 110/23 Secondary Volts. Control Circuit Transformer with Primary and Secondary Fuse Blocks. For use with type CC Fuses.

Category: 250 - 450 VA Industrial Control Transformers

SQD QOPLPS PL CIRCUIT BREAKER POWER

Category: 1-Phase DC Power Supplies

Industrical Control Transformer, 3PH 300KVA 480-240 provides a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids, timers or other loads requiring above average voltage regulation when actuated.

Category: 225 - 300 KVA Dry Type Transformers

Industrical Control Transformer, 3PH 750KVA 480-208Y 120 provides a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids, timers or other loads requiring above average voltage regulation when actuated.

Category: Dry Type - 333 - 750 KVA

Industrical Control Transformer, 3PH 500KVA 480-240 provides a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids, timers or other loads requiring above average voltage regulation when actuated.

Category: Dry Type - 333 - 750 KVA

Drive motors. 100-550-7500carol strm. Mt vendor /carol strm. Trx kit.

Category: 60 - 100 VA Industrial Control Transformers

Wall Mount Power Supply. Primary Voltage: 120V AC, 0.5 Amp. Secondary Voltage: 12V AC, 60 Watt. Short Circuit Protection.

Category: Electronic Lighting Transformers

Industrical Control Transformer, 3PH 300KVA 480-208Y 120 provides a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids, timers or other loads requiring above average voltage regulation when actuated. Replacing older general purpose transformers with our DOE 2016 compliant equipment will result in increased profitability from lower operating costs as well as a positive impact on the environment from a reduced carbon footprint.

Category: 225 - 300 KVA Dry Type Transformers

Acme Electric T-1-81219 Control Transformer, Harsh Environment, Industrial, 240 X 480 V, 120 V, 50/60 HZ, 1 PH, 16.67 AMP, 55 DEG C Rise, Wire Lead Screw Terminal Connection, 155 DEG C Class F Insulation, Wall Mounting, NEMA 3R, 7.13 IN Length, 10.31 IN Width, 14.77 IN Height, 2 KVA, Steel, Air Cooled/Dry Cooling, Configuration: Primary: Two Winding, Secondary: One Winding, UL Listed, CSA Certified, OSHA Compliant, ANSI, IEEE, For Motor Starters, Contactors, Solenoids And Timers Or Other Loads

Category: 2 - 7.5 KVA Industrial Control Transformers

Transformer, Magnetic Lighting, Remote, 2 x 300 Watt 2 Circuit, 1-Pole, 120 Volt AC Input, 12 Volt DC Output, Black

Category: Magnetic Lighting Transformers

Industrical Control Transformer, 3PH 500KVA 480-208Y120 provides a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids, timers or other loads requiring above average voltage regulation when actuated

Category: Dry Type - 333 - 750 KVA

Acme Electric T-1-81221 Control Transformer, Harsh Environment, Industrial, 240 X 480 V, 120 V, 50/60 HZ, 1 PH, 41.67 AMP, 55 DEG C Rise, Wire Lead Screw Terminal Connection, 155 DEG C Class F Insulation, Wall Mounting, NEMA 3R, 10.19 IN Length, 13-1/4 IN Width, 13.85 IN Height, 5 KVA, Steel, Air Cooled/Dry Cooling, Configuration: Primary: Two Winding, Secondary: One Winding, UL Listed, CSA Certified, OSHA Compliant, ANSI, IEEE, For Motor Starters, Contactors, Solenoids And Timers Or Other Loads

Category: 2 - 7.5 KVA Industrial Control Transformers

The Acme Electric TFMR 1PH .15KVA 208/230/460-115 AE and CE Series Industrial Control Transformers are designed specifically for machine tool control circuit applications. These transformers have the ability to handle potentially damaging high in-rush currents that occur when electromagnetic components are energized, without sacrificing the required stable output voltage. Designed to meet or exceed the demands of international standards combined with the full breadth of product offering, the AE and CE Series Transformers from Acme Electric are the ideal solution for your industrial control applications.

Category: 130 - 300 VA Industrial Control Transformers

Transformer, Magnetic, Remote Mount, 120 Volt AC Input, 24 Volt DC Output, 250 VA Circuits, Black, Surface Mount

Category: Magnetic Lighting Transformers

Transformer, Magnetic, Remote Mount, 120 Volt AC Input, 12 Volt DC Output, 2 x 300 VA Circuits, Black, Surface Mount

Category: Magnetic Lighting Transformers

Transformer, Magnetic, Remote Mount, 120 Volt AC Input, 12 Volt DC Output, 10 VA Circuits, Black, Surface Mount, Class 2

Category: Magnetic Lighting Transformers