"DNC-80-200-PPV-A"

FUSEHOLDER

Category: In-Line Fuse Holders

60A, 600V, Fuse Holder 2 Pole for Class J Fuse IND

Category: Class J Finger Safe / Dead Front Fuse Holders

Steel Clip for Mounting HLR Style Fuse Holders to a Panel

Category: Panel Mount Fuse Holders

MIDGET 1-PLOLE IN-LINE BREAKA

Category: In-Line Fuse Holders

1P In-Line Watertight Fuseholder

Category: In-Line Fuse Holders

BUS BK/HHA ATC ADD-A-CIRCUIT;

Category: In-Line Fuse Holders

For use with ECD00-D0W. Fuse and fuseholder accessory kit includes two fuses, a UL listed holder, and fuse puller. Required to meet UL1008 requirements for Short Circuit Current Rating (5000A). The fuse is installed on the line side of the dimming control. Under this method, a single ECD00-FUS may feed multiple ECD00-D0Ws, provided that their total load does not exceed 16A, and they share the same normal and emergency breakers. Fuses are 30 Amps

Category: Modular Fuse Holders

Mersen UltraSafe US14 and US22 modular fuseholders offer the highest levels of safety and features for IEC Cylindrical 14x51mm fuses and 22x58mm. Like all UltraSafe fuseholders, they qualify as "finger safe" to an IP20 grade of protection under IEC standards. These fuseholders come standard with a mechanical indicator that indicates fuse presence. If a fuse with a mechanical striker is used, the fuseholders mechanical indicator will also indicate a blown fuse. Microswitches can be supplied with the fuseholders if desired to allow for remote blown fuse indication. These fuseholders also feature padlocking capabilities. 750 Volts 50 Amps 3 pole with indicator series.

Category: Modular Fuse Holders

250V 10A 5X20MM PANEL MT FH

Category: Panel Mount Fuse Holders

630AMP 1000V FUSE BASE

Category: Bolt-Down Fuse Holders

Standard Vibration Resistant Fuse Holder With Bayonet Knob, 250 VAC, 30 A, 1-1/4 IN Fuse, Quick-Connect

Category: Panel Mount Fuse Holders

30A 600V Midget 13/32" x 1-1/2" Optima Fuseholder, 45mm Width

Category: Class CC Finger Safe / Dead Front Fuse Holders

BUSS FUSEHOLDER, 30A, Loadside: Aluminum setscrew #2-12, Lineside: Copper setscrew #3-8, 200 kA RMS Sym., Single-pole, HEB Series, Breakaway, 600V

Category: In-Line Fuse Holders

Eaton Bussmann series CHM modular fuse holder, 600V (UL), 690V (IEC), 30A (UL), 32A (IEC), 200 kAIC, Modular fuse holder, Single-pole - CHM1DNU

Category: Midget Finger Safe / Dead Front Fuse Holders

Eaton Bussmann series CHM modular fuse holder, 600V (UL), 690V (IEC), 30A (UL), 32A (IEC), 200 kAIC, Modular fuse holder, Three-pole - CHM3DNU

Category: Midget Finger Safe / Dead Front Fuse Holders

(1) Insulating Boot for In-Line Fuse Holders WPB1 Contains one standard boot for use with A, B, C, D, or J termination

Category: In-Line Fuse Holders

Fuse Block 300VAC 300VDC Class T 200A 1-Pole Box with Reinforced Clip

Category: Bolt-Down Fuse Holders

BUSS FUSEHOLDER, 30A, Loadside: Copper crimp #6; (2) #10, Lineside: Copper setscrew (2) #2-12, 200 kA RMS Sym., Single-pole, HEB Series, Breakaway, 600V

Category: In-Line Fuse Holders

Eaton Bussmann series HEX inline fuse holder, Non-breakaway, Water-resistant, 0-30 A, 600 V, Loadside: copper setscrew (1) #12-3, Lineside: copper setscrew (2) #12-3 connection, Two-pole, Used with class CC and 13/32" x 1 1/2" Fuse

Category: In-Line Fuse Holders

Breakaway Leb Type Fuseholder With Permanently Installed Neutral

Category: In-Line Fuse Holders

Panel Mount Fuse Holder with Knob-Type Carrier for 5mm x 20mm Fuses, Finger Grip, 15 Amp, 250 Volt, Low Profile Rear Hex Nut, .30" Max Panel Thickness, Solder Terminal with 3/16" Quick Connect, In-Line

Category: Panel Mount Fuse Holders

1POLE INLINE FUSEHOLDER WITH CRIMP TERMI. The Littelfuse 600 V in-line watertight fuse holders are the ideal answer for all high humidity and corrosive environments where fuses are required. Available in both breakaway and non-breakaway, single and double pole versions, these fuse holders allow maximum flexibility for any application. Applications: Street, alley, and parking lot lighting. Security and perimeter lighting. Traffic signals. Outdoor illuminated signs. Sports lighting. Boat electrical circuits. Tractors and yard equipment. General outdoor circuit protection. Benefits: Safety-Permits individual fixture or device to be disconnected from circuit for servicing. Eliminates possibility of shock. Individual fixture fusing-Prevents loss of one fixture through accident, vandalism, or end of life from darkening the entire circuit. Simplifies maintenance- Being able to immediately identify the one faulted fixture eliminates testing the entire circuit, speeds repair and permits servicing the individual unit while the rest of the circuit is functioning. Reduces damage from fault-Can prevent faulted ballast or other failure from severely damaging fixture or device, reducing necessary repair or need of replacement. Features: Watertight-Internal O-ring provides watertight seal. Superior terminal seeds-Ultrasonically-welded terminals provide maximum strength and eliminate leaking at terminals. Break-Resistant- Fiberglass ûreinforced polymer body resists damage from dropping or impact much better than phenolic look-alikes. Flexible terminations-Accommodates a wide range of stranded or solid copper conductors, with either crimp or screw terminals. One-pole and two-pole models- available to accommodate all system voltages up to 600v.

Category: In-Line Fuse Holders

Eaton Bussmann series low voltage British standard fuse holder, LV, 32 A, AC 550 V, BS88/F1, 1P, BS, front connected, back stud connected

Category: Modular Fuse Holders

Fuse Holder Breakaway Double Pole Watertight Inline Feseholder

Category: In-Line Fuse Holders