Heat Pumps & Accessories

SpeediChannel, 4" Wall Penetration, Used To Transition From the SpeediChannel System To a Through Wall Penetration, Paintable, Color: Natural, Includes: Stainless Steel Screws.

Category: Line Hide Channel Connectors & Adaptors

SpeediChannel, Covers Line Sets, Drain Lines And Control Cables, Size: 4", Length: 6-1/2 Feet, Sunlight Resistant, Paintable. Material: Rigid PVC, Color: Natural

Category: Line Hide Channel

SpeediChannel Duct End, Size: 4 Inch, Paintable, Color: Natural

Category: Line Hide Channel Connectors & Adaptors

UltraLite Lightweight Concrete Equipment Pads, Size: 16" x 36", Thickness: 3". Used To Support Air-Conditioning Compressor And Condensing Units.

Category: Pads

FiberRunner Threaded Existing 1/2 Inch Rod Bracket, Black

Category: Brackets

Used to support the 6x4 and 4x4 systems attaching to the top of cabinets. Adjustable from 4 1/4" (108mm) to 9" (229mm) allowing runs to be leveled over uneven cabinet heights. Bracket is secured to the cabinet frame with through bolts (not included). The

Category: Brackets

Wall Mounted Heat Pump, Unit Only, Indoor, High CFM: 455, Low CFM: 425, 230/208V, 23.0 SEER, 9,000 BTU, Includes: Wireless Remote Controller, Max Lineset Length Without Adding Refrigerant: 25'. ***Requires EPA Section 608 certification for installation

Category: Indoor Units - Wall Mount

Line Set, Minisplit, Length: 25 Feet, Insulation: 1/2", Suction Line: 1/2", Liquid Line: 1/4". Copper Tubing Complies With ASTM B280 For Seamless Copper Tube For ACR.

Category: Line Sets

Wall Mounted Heat Pump, Unit Only, Indoor, High CFM: 715, Low CFM: 670, 230/208V, 19.0 SEER, 24,000 BTU, Includes: Wireless Remote Controller, Max Lineset Length Without Adding Refrigerant: 33'. ***Requires EPA Section 608 certification for installation

Category: Indoor Units - Wall Mount

Ducted Equipment Pad, Gray

Category: Pads

Heat Pump, Unit Only, Outdoor, High CFM: 715, 208/230V, 22.0 SEER, 19,000 BTU, Rated For Heat Operation And -5°F, Max Lineset Length Without Adding Refrigerant: 98' Total. ***Requires EPA Section 608 certification for installation

Category: Outdoor Units

Heat Pump, Unit Only, Outdoor, High CFM: 505, Low CFM: 450, 230/208V, 22.5 SEER, 13,800 BTU, Max Lineset Length Without Adding Refrigerant: 25'. ***Requires EPA Section 608 certification for installation

Category: Outdoor Units

Heat Pump, Unit Only, Outdoor, High CFM: 450, 208/230V, 16.9 SEER, 12,000 BTU, Max Lineset Length Without Adding Refrigerant: 25'. ***Requires EPA Section 608 certification for installation

Category: Outdoor Units

Heat Pump, Unit Only, Outdoor, High CFM: 715, Low CFM: 670, 230/208V, 19.0 SEER, 24,000 BTU, Includes: Wireless Remote Controller, Max Lineset Length Without Adding Refrigerant: 33'. ***Requires EPA Section 608 certification for installation

Category: Outdoor Units

Wall Mounted Heat Pump, Unit Only, Indoor, High CFM: 450, 230/208V, 16.9 SEER, 12,000 BTU, Includes: Wireless Remote Controller, Max Lineset Length Without Adding Refrigerant: 25'. ***Requires EPA Section 608 certification for installation

Category: Indoor Units - Wall Mount

Ducted Equipment Pad, Plastic, Gray

Category: Pads

PLAIN PAD NO JOINT 36IN X 48IN 126C

Category: Pads

BLI B180SHRZN

Category: Brackets

FiberRunner QuikLock New Threaded Rod Bracket

Category: Brackets

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver

Category: Brackets

Used to support the 12x4 system from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with tw

Category: Brackets

Used to support the 6x4 and 4x4 systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 16mm Thread

Category: Brackets

Used to support the 12x4 system, dual 6x4, or dual 4x4 systems attaching to the top of cabinets. Adjustable from 4 1/4" (108mm) to 12" (305mm) allowing runs to be leveled over uneven cabinet heights. Bracket is secured to the cabinet frame with through bo

Category: Brackets

Used to support the 6x4 and 4x4 systems from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly

Category: Brackets