"CCP2-MW1-3"

THB HS30-40 HVYWALL HTSHK 3:1

Category: Heavy Wall Heat Shrink

NSI HWHS8-2-6 8-2 AWG HEAVY W

Category: Heavy Wall Heat Shrink

NSI HWHS6-40-6 6-4/0 AWG HEAV

Category: Heavy Wall Heat Shrink

3M HDT-6000-48" BLK HVY WALL CABLE SLEEVES (5 4' LENGTHS) 2.1"-4.8" O.D. EXPANDS TO 6.00/1.80"

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 1 kV, Conductor Range: 8 AWG - 1/0 AWG, Shrink Ratio: 3:1, Insulation Diameter Range: 0.20" - 0.80", Relaxed Tube Length: 9". Provides: Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, Polyolefin, 48" Length Sleeve, 0.4 Expanded/0.15" Recovered I.D., 3:1 Shrink Ratio, Black, MSHA Specification, 100 Pcs

Category: Heavy Wall Heat Shrink

THB HS40-400-25 HVYWALL HTSHK

Category: Heavy Wall Heat Shrink

Heat Shrink Cable Sleeve, Heavy-Wall, 600 - 1250 MCM, 12", Black, Pack of 10, 3" Expanded I.D., 1" Recovered I.D.

Category: Heavy Wall Heat Shrink

IDEAL, Heat Shrinkable Tube, Thermo-Shrink«, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.160 IN, Length: 12 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 2/0 AWG - 350 MCM, Nominal Recoveredi.d. (max.): 0.470 IN, Expanded I.d. (min.): 1.500, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-1500

Category: Heavy Wall Heat Shrink

Heat Shrink, 1.5 inch, 2/0 to 350 MCM, Heavy Wall, 4 Foot, Black, Maximum Rating: 1000 Volt, Shrink Ratio 3:1

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, 8-1/0 AWG, 12" Length, 0.8"Expanded/0.2" Recovered I.D., Polyolefin Material, 3:1 Shrink Ratio, 25 Pieces, Black

Category: Heavy Wall Heat Shrink

Heavy-Wall Heat-Shrinkable Tubing for Cable Range 750 - 1250 MCM, Expanded Diameter 3.54, Length 48 inch. rated for 600 Volt, 90 degrees continuous use, Material: Cross-linked polyolefin with thermoplastic adhesive liner, Black

Category: Heavy Wall Heat Shrink

MMM HDT-7000-48"-BLACK-5 PCS

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, 2-4/0 AWG, 6" Length, 1.1" Expanded/0.37" Recovered I.D., Polyolefin Material, 3:1 Shrink Ratio, Black

Category: Heavy Wall Heat Shrink

3M HDT-1100-48"-BLACK-20 PCS

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, 0.8" Expanded/20" Recovered I.D., 3:1 Shrink Ratio, 48" Length Sleeve, Black, MSHA Specification, 20 Pieces

Category: Heavy Wall Heat Shrink

3M HDT-1500-48"-BLACK-20 PCS

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy-Wall, 2 - 4/0 AWG, 9", Black, 1.1" Expanded I.D., .35" Recovered I.D., .12" Nominal Recovered Wall Thickness, Model TS-46-750, Rated for 600V, 90 Degree Celsius

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, 250-750 kcmil, 48" Length Sleeve, 2" Expanded/0.65" Recovered I.D., Polyolefin Material, 3:1 Shrink Ratio, 600 Volts, Black, 10 Pieces

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 600 Volt, Conductor Range 14 AWG - 10 AWG, Shrink Ratio 3:1, Insulation Diameter Range 0.12 Inch - 0.35 Inch, Relaxed Tube Length 25 Foot Reel, Provides Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink

3m(tm) Heat Shrink Heavy-wall Cable Sleeves (boxed) Itcsn-0400-25-u, 12-6 Awg,expanded/recovered I.d. 0.40/0.15 In, 25 Ft Reel Length

Category: Heavy Wall Heat Shrink

Easy-Splice Heavy Wall Heat Shrink 6-4/0 AWG, 48 Inch - 3 Count Made of specially formulated polyolefin irradiated and thermally stabilized to give the material "elastic memory". When a proper amount of heat is directly applied to the shrink sleeve, it will permanently shrink to its original unexpanded diameter tightly cover and "mold" itself into irregular shapes. The interior sleeve is coated with an adhesive that assures a watertight seal after shrinking. For use on standard poly- or elastomeric-insulated/ jacketed cables or lead-jacketed cables, which may include aluminum or steel armoring. RUS accepted for use as a secondary tap or splice cover. May be used for jacket repair on cables up to 35 kV. Qualified to ANSI C119.1-1986 for underground splicing. Insulate and seal buried electrical connections rated up to 1,000 volts. UL 486D Listed, CSA C22.2. Temperature Rating: 121-135 degrees C, 1,000V. CONNECTORS UP TO 6 INCHES: Recommended cut length = Connector length + 4 inches. CONNECTORS OVER 6 INCHES: Recommended cut length = Connector length + 5 inches.

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, 48" Length Sleeve, 1.1" Expanded/0.37" Recovered I.D., 3:1 48" Black, MSHA Specification, 20 Pieces

Category: Heavy Wall Heat Shrink

Heat Shrink Tubing, Cable Range #4-3/0 AWG, 5 Inches, Black

Category: Heavy Wall Heat Shrink