"terminal blocks"

Heat Shrink, 1.5 inch, 2/0 to 350 MCM, Heavy Wall, 4 Foot, Black, Maximum Rating: 1000 Volt, Shrink Ratio 3:1

Category: Heavy Wall Heat Shrink

Thick wall adhesive lined, 2.7" (68.6mm) diameter, 48.0" (1219.2mm) length, adhesive lined black cross-linked polyolefin, 2 pc. package quantity.

Category: Heavy Wall Heat Shrink

NSI HWHS6-40-4 6-4/0 AWG HEAV

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, 8-1/0 AWG, 12" Length, 0.8"Expanded/0.2" Recovered I.D., Polyolefin Material, 3:1 Shrink Ratio, 25 Pieces, Black

Category: Heavy Wall Heat Shrink

NSI HWHS14-6-48 14-6 AWG HEAV

Category: Heavy Wall Heat Shrink

Thick wall adhesive lined, .8" (20.3mm) diameter, 9.0" (228.6mm) length, adhesive lined red cross-linked polyolefin, 10 pc. package quantity.

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy-Wall, 250 - 750 MCM, 18", Black, 2" Expanded I.D., .63" Recovered I.D., .16" Nominal Recovered Wall Thickness, Model TS-46-750, Rated for 600V, 90 Degree Celsius

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, 48" Length Sleeve, 1.1" Expanded/0.37" Recovered I.D., 3:1 48" Black, MSHA Specification, 20 Pieces

Category: Heavy Wall Heat Shrink

Heat Shrink, .35 inch, 14 AWG to 10 AWG, Heavy Wall, 4 Foot, Black, Maximum Rating: 600 Volt.

Category: Heavy Wall Heat Shrink

Easy-Splice Heavy Wall Heat Shrink 6-4/0 AWG, 48 Inch - 3 Count Made of specially formulated polyolefin irradiated and thermally stabilized to give the material "elastic memory". When a proper amount of heat is directly applied to the shrink sleeve, it will permanently shrink to its original unexpanded diameter tightly cover and "mold" itself into irregular shapes. The interior sleeve is coated with an adhesive that assures a watertight seal after shrinking. For use on standard poly- or elastomeric-insulated/ jacketed cables or lead-jacketed cables, which may include aluminum or steel armoring. RUS accepted for use as a secondary tap or splice cover. May be used for jacket repair on cables up to 35 kV. Qualified to ANSI C119.1-1986 for underground splicing. Insulate and seal buried electrical connections rated up to 1,000 volts. UL 486D Listed, CSA C22.2. Temperature Rating: 121-135 degrees C, 1,000V. CONNECTORS UP TO 6 INCHES: Recommended cut length = Connector length + 4 inches. CONNECTORS OVER 6 INCHES: Recommended cut length = Connector length + 5 inches.

Category: Heavy Wall Heat Shrink

NSI HWHS20-750-12 2/0 AWG - 7

Category: Heavy Wall Heat Shrink

NSI HWHS500-1500-9 500-1500 M

Category: Heavy Wall Heat Shrink

3m(tm) Heat Shrink Heavy-wall Cable Sleeves (boxed) Itcsn-0400-25-u, 12-6 Awg,expanded/recovered I.d. 0.40/0.15 In, 25 Ft Reel Length

Category: Heavy Wall Heat Shrink

NSI HWHS6-40-12 6-4/0 AWG HEA

Category: Heavy Wall Heat Shrink

NSI HWHS8-2-12 8-2 AWG HEAVY

Category: Heavy Wall Heat Shrink

RCH WCSM-12/3-150-S B25 HEAVY WALL, W/SEALANT, #6-14, 6" PIECE

Category: Heavy Wall Heat Shrink

3-IN MALL COND STRAP

Category: Heavy Wall Heat Shrink

HW HEAT SHRINK TBG

Category: Heavy Wall Heat Shrink

Heat Shrink Tubing, Cable Range 500-1000MCM, 48 Inches, Black

Category: Heavy Wall Heat Shrink

STC HS-410 4-IN MALL COND STRAP

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 1 kV, Conductor Range: 8 AWG - 1/0 AWG, Shrink Ratio: 3:1, Insulation Diameter Range: 0.20" - 0.80", Relaxed Tube Length: 6". Provides: Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink

Heat Shrink Tubing, Cable Range #4-3/0 AWG, 5 Inches, Black

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 600 Volt, Conductor Range 14 AWG - 10 AWG, Shrink Ratio 3:1, Insulation Diameter Range 0.12 Inch - 0.35 Inch, Relaxed Tube Length 25 Foot Reel, Provides Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink

Heat Shrink, Heavy-Wall, 800 - 2000 MCM, 48", Black, Pack of 5

Category: Heavy Wall Heat Shrink