Search results

Breaker, Motor Protection, 45 Amp, F Frame, 3-Pole, DIN Rail Mount, 600 Volt AC, High Magnetic Trip

Category: Manual Rotary Motor Controllers

Splitter - Two 4-Pin Female DC Micro to One 4-Pin DC Micro, Standard Wiring, Epoxy Coated Zinc

Category: Cordset Splitters

Switch, Disconnect, Non-Fused, 25 Amp, 690 Volt AC, 3-Pole, 2 Position, Body and Shaft, Base/DIN Rail Mount

Category: Base & DIN Rail Mount Non-Fusible Disconnect Switches

Push Button, Blue Flush, Metal Operator, Metal Latch, Operator Only

Category: 22mm Flush Pushbutton Operators

MPCB, Standard Magnetic Trip, for C36 - C40, 6.3 - 10 Amp, High Performance, Frame Size D

Category: Manual Rotary Motor Controllers

Cold Junction Compensation Kit, for 1756-IRT8I, -IT16, 2 Jumpers

Category: PLC Temperature Modules

Cordset, Mini Style Connector, 5 Pin, 300 Volt, 5.6 Amp, Straight Female, PVC, 18 AWG, Color Code IEC, 6 Foot, Yellow

Category: 5-Pin Cordsets

Auxiliary Contact Block, Side Mount, 1 Normally Closed, without Sequence Terminal Designation

Category: Starter & Contactor Auxiliary Contacts

Controller, Programmable, Micro 820, 12 Inputs, 24 Volt DC, 8 Outputs, 7 Source 24 Volt DC Outputs, 1 Analog, 0 - 10 Volt DC, 4 Analog 0 - 10 Volt Dc Input, Shared with DC Inputs, Fixed Terminals

Category: Programmable Logic Controllers

Sensor, Photoelectric, RightSight, Polarized Retro-Reflective, 10.8 - 30 Volt DC, Visible Red Light Source, 0.025 - 3 meter, Sensing Distance, Light Operate, 4 Pin, DC Micro Connector

Category: Normal Duty Reflex Photoelectric Sensors

Heater Element, Eutectic Alloy Type Overload Relay, Bulletin 500 Line Starters, Trip Class 20, Type W, Size 00..0 (Full Load Amps 2.12), Size 1 (Full Load Amps 2.15) *** See Document Below for Other Amperages ***

Category: Heater Elements - W Style

Relay, Timing, On-Delay, 8 Pin, 100-240VAC, Trigger at Power On, Reset at Power Off, 2 Pole, Double Throw, 0.05 Seconds to 300 Hour Range

Category: 8-Pin Timing Relays

ALB 1492-MT6X12 TERMINAL STRIP marking tag. 600 markers per roll. 6 mm x 12 mm. Used with 1492-J,L and 1738 ArmorPoint

Category: Terminal Block Marking Strips

Sensor, Photoelectric, Standard Diffuse, 10 - 40 Volt DC, 1.52 meter/ 5 Foot, Sensing Distance, NPN/PNP Transistor, 4-Pin DC, Micro M12 Quick Disconnect

Category: Normal Duty Diffuse Reflective Photoelectric Sensors

Pilot Light, Push to Test, Amber, 12 - 130 Volt AC/DC, LED, 30 mm, NEMA 4/13

Category: Press-To-Test Pilot Lights

Selector Switch, 2 Position, Illuminated, Maintained, Metal, Green, with White Insert, Operator Only

Category: 22mm Knob Selector Switches

Push Button, Booted Flush Head, Red, 1 Normally Open, 1 Normally Closed, Standard Contact, NEMA 4/4X/13, 30 mm

Category: 30mm Corrosion Resistant Pushbutton Operators

Servo Drive, Kinetix 5500, 12.5 Amp Peak Current Output, 1 and 3 Phase 190 - 528 Volt AC Input

Category: 480 VAC Servo Drives

Point I/O, Incremental Encoder Module, 24 Volt DC

Category: Encoder Accessories

Module, Thermocouple, MicroLogix, 4 Input Channels, Plus CJC Sensor, 50 mA at 24 Volt DC

Category: Programmable Logic Controllers

Auxiliary Contact, Side Mounted, 2 Normally Open, 9 MM Wide, For 140MT

Category: Manual Motor Protector Auxiliary Contact Blocks

Sensor, Photoelectric, Series 9000, Polarized Retro-Reflective, 70 - 264 Volt AC/DC, Power Source, Infrared 660 nm, Light Source, Standard On/Off Control

Category: Normal Duty Reflex Photoelectric Sensors

Power Connector, 5032, 8-Channel, IO-Link Master, M12 L-Coded

Category: PLC I/O Modules

AB 889D-F8AB-15 889D DCMICRO CORDSET/PATCHCORD

Category: 8-Pin Cordsets