Control & Automation

ControlLogix Redundancy Premium Module with 2 SFPs (Allows easier migration from existing solutions that utilized the 1756-RM2 module)

Category: PLC Logic Expansion Modules

Terminal Block, Screw Type Center Jumper, 10 Pole, Gray, for 1492-WM3, 10 in a Package

Category: Terminal Block Jumper Bars

Terminal Block, 25 Amp, 600 Volt AC/DC, 2 Connections Point per Side, Orange, 30 - 12 AWG, 2.5mm, 50 in a Package

Category: 5.2mm Feed Through & Ground Terminal Blocks

Conversion Module, 1771-OD16, -ODD, -OQ16, to 1756-OA16I, -OB16I, Digital I/O Modules, Fused

Category: PLC Communication Adapters

Contactor, IEC, 37 Amp, 3-Pole, 24 Volt DC Electronic Coil, Integrated Diode, 1 Normally Closed, Auxiliary Contact, Load Side Coil Termination

Category: IEC Contactors - DC Operating

Controller, SMC-Flex, Solid State, Open, 34 - 135 Amp, 40 - 150 Horse Power @ 200 - 480 Volt AC, 100 - 240 Volt AC Coil, Internal Bypass

Category: Basic Control Softstarters

Terminal Block, Screw Type Center Jumper, 4 Pole, Gray, for 1492-W16S, 10 in a Package

Category: Terminal Block Jumper Bars

Safety Contactor, 100S, 43 Amp, Line Side Termination, 24 Volt DC (w/Electronic Coil), 3 Normally Open, 4 Normally Closed, Bifurcated Contact

Category: IEC Contactors - DC Operating

I/O Module, Discrete, Modicon, Momentum, 16 Inputs/Outputs, 24 Volt DC

Category: PLC I/O Modules

PowerFlex 753 AC Drive, With Embedded I/O, Standard Protection, Forced Air, AC Input with DC Terminals, Flange Type, 34 Amp, 25 Horse Power Normal Duty, 20 Horse Power Heavy Duty, 480 Volt AC, 3-Phase, Frame 3, Filtered, CM jumper Installed (Preferred), DB Transistor, Blank (No HIM)

Category: 480 Volt AC Operated General Purpose Variable Frequency Drives

30 Amp, 2-Pole, Definite Purpose Contactor, 600V Rated, Screw/Pressure Plate Terminals, 24V AC Coil. Series: D1

Category: 2-Pole Definite Purpose Contactors

Terminal Block, High Density, 55 Amp, 600 Volt AC/DC, Red, Finger Safe, Single Circuit, 50 in a Package

Category: 10mm Feed Through & Ground Terminal Blocks

Busbar, Terminal Shroud, 25 Amp, Spacing Adapter, for 141A-FS, FM

Category: Modular Motor Control Terminal Covers

Terminal Block, 85 Amp, 600 Volt AC/DC, Red, 16 mm, Feed Through, 50 in a Package

Category: 16mm Feed Through & Ground Terminal Blocks

Terminal Block, 2 Level, 2 Circuit, 20 Amp, 600 Volt AC/DC, White, 22 - 12 AWG, 2.5mm, 100 in a Package

Category: Double Deck Feed Through & Ground Terminal Blocks

Motor Controller, SMC-3, Open Type, 27 - 108 Amp, 200/208, 230, 380/400/415/460, Volt, 3 Phase, 24 Volt AC/DC Coil, 20 - 75 Horse Power

Category: Basic Control Softstarters

Starter, Size 1, 27 Amp, 600 Volt AC, 240 Volt AC Coil, Non-Reversing, NEMA 1 Enclosure, 3-Pole, Thermal Overloads

Category: NEMA Size 1

Terminal Block, 25 Amp, 600 Volt AC/DC, Green, 30 - 12 AWG, 2.5 mm, 100 in a Package

Category: 2.5mm Feed Through & Ground Terminal Blocks

Terminal Block, 25 Amp, 600 Volt AC/DC, 2 Connections Point per Side, Yellow, 30 - 12 AWG, 2.5mm, 50 in a Package

Category: 5.2mm Feed Through & Ground Terminal Blocks

Cable, Pre-wired, for 1756-OF8 (Current), or 1756-OF8H (Current/Hart), Analog Output Module, 22AWG, 9 Twisted Pair Conductor, Shielded, with 1756-TBNH Connector, and AIFM 25-Pin, D-Shell Connector, 2.0 meter, (6.56 Foot)

Category: PLC Connection Cables

Spring Clamp Terminal Block, One-Circuit Feed-Through, 4 mm Or 2.5 mm, 2 Connections, Green

Category: 4mm Feed Through & Ground Terminal Blocks

Push Button, Momentary, Flush, Illuminated, 30 mm, No Cap, No Power Supply, Full Guard

Category: 30mm Flush Pushbutton Operators

Socket, Fingersafe Din Rail Snap-Mount, 8-Blade, Snap-Mount/Surface Mount, 300V, 10A

Category: 8-Blade Mounting Sockets

Feed Through Terminal Block. Screw Clamp. Type: M 4/6. Color: Black. 600V/30A. Size: 4 mm Block, 6 mm Spacing. DIN 1 - DIN 3. Wire Size: 22 - 10 AWG.

Category: 4mm Feed Through & Ground Terminal Blocks