Search results

3 OPER HOLE IN COVER MODIFIED

Category: Die Cast Pilot Device Enclosures

Pushbutton enclosures PB, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and cover: Dipcoat primed, powder-coated on the outside, textured paint, color: RAL 7035, supply includes: Enclosure with screw-cover with 30.5mm pushbutton hole (s), Rear wall mounting holes, description: These PB enclosures can be used for virtually any application that requires mounting of pushbuttons, pilot lights, selector switches,etc. The PB series ensures NEMA protection through a foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and cover.

Category: Steel Pilot Device Enclosures

GCS Series - Aluminum Operator Body - Three Drilled And Tapped Operator Holes In Cover - Style 1

Category: Die Cast Pilot Device Enclosures

Pushbutton housing PB, mini, material: Sheet steel, surface: Polyester powder coating on a phosphated surface finish, color: RAL 7035, supply includes: Cover screws, captive, Wall mounting brackets, description: The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

Category: Polyester Pilot Device Enclosures

KIL GO567-LOK SELECTOR SWITCH

Category: Pilot Device Locking Attachments

G Series - Red 24v LED Pilot Light Lamp - For Use Withgob3/gol3/gob4/gol4 Seriespilot Lights And Illuminated Push Buttons

Category: Assembled Pilot Lights

Push Button, Reset Operator, G Series, 6 Inch Long Shaft, Reset/Blank Name Plate, Black Plunger

Category: Pilot Device Mechanical Push Rods

G Series - Aluminum Extended 110V LED Illuminated Push Button (Push To Test Pilot Light) Operator - Red Lens With Blank Nameplate - 1NO/1NC Contact Rating

Category: 30mm Hazardous Location Pushbutton Operators

Gsc/swbc Series Controls Operator Bodies

Category: Steel Pilot Device Enclosures

Potentiometer, Single Turn Operator, No Electrical Control, Short, 1/4 Inch Diameter, 7/8 Inch Shaft

Category: Potentiometer Pilot Device Kits

KIL GO-8673-BJK N.O. CONTACT

Category: 30mm Contact Blocks

G Series Controls Selector Switches

Category: CA Hazardous Location Switch Pilot Devices

Pushbutton housing PB, Stainless steel, material: Stainless steel 1.4301 (AISI 304), surface: Enclosure and cover: Brushed, grain 240, supply includes: Wall mounting bracket, Cover screws, captive, description: The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

Category: Stainless Steel Pilot Device Enclosures

XCS Series - Aluminum Momentary Contact Three Mini Push Button Cover With Device - Three Black Buttons With Nameplates To Be Specified -3NO/3NC Contact Rating

Category: 3-Element Control Stations

Mini Pushbutton Box, NEMA 4, NEMA 12, NEMA 13, Number of Holes: 2, Hole Diameter: 0.8858268", Dimensions: H: 5.1", W: 2.7", D: 3.5"

Category: Polyester Pilot Device Enclosures

Pushbutton enclosures PB, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and cover: Dipcoat primed, powder-coated on the outside, textured paint, color: RAL 7035, supply includes: Enclosure with screw-cover with 30.5mm pushbutton hole (s), Rear wall mounting holes, description: These PB enclosures can be used for virtually any application that requires mounting of pushbuttons, pilot lights, selector switches,etc. The PB series ensures NEMA protection through a foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and cover.

Category: Polyester Pilot Device Enclosures