"klein tools"

11-in-1 Screwdriver/Nut Driver, Includes: Nut Drivers (3/8", 5/16", 1/4"), Phillips (#1, #2 Phillips), Slotted (1/4", 3/16"), TORX® (T10, T15), Square (#1, #2)

Category: Multi-Bit Screwdrivers

Replacement Bit, Includes: #2 Phillips – 1/4" Slotted

Category: Multi-Bit Screwdrivers

32-Piece Magnetic Tamper Proof Screwdriver, Includes: TORX (T7, T8, T10, T15, T20, T25, T27, T30, T40), Hex Bits (3/32", 7/64", 1/8", 9/64", 5/32", 3/16"), Metric Hex Bits (2mm, 2.5mm, 3mm, 4mm, 5mm), Spanner Bits (4, 6, 8, 10), Tri-Wing Bits (1, 2, 3, 4)

Category: Multi-Bit Screwdrivers

10-in-1 Screwdriver/Nut Driver, Includes: 5/16", 1/4" Nut Drivers, #1, #2 Phillips, 1/4", 3/16" Slotted, #10, #15 TORX®, #1, #2 Square-Recess

Category: Multi-Bit Screwdrivers

5-in-1 Screwdriver/Nut Driver, Includes: Nut Driver (5/16"), Phillips (#1, #2), Slotted (9/32", 3/16")

Category: Multi-Bit Screwdrivers

Heavy-Duty Multi-Bit Screwdriver/Nut Driver, Includes: Nut Drivers (5/16", 1/4"), Phillips (#1, #2), Slotted (1/4", 3/16"), Square-Recess (#1, #2), Hex Driver (3/8")

Category: Multi-Bit Screwdrivers

Adjustable Length Screwdriver, Shank Length: Adjusts from 4" to 8", Tip Size: Square #1 and #1

Category: Multi-Bit Screwdrivers

15-In-1 Tamperproof Screwdriver, #10, #15, #20, #25, #27, #30 Torx-Pins;1/8”, 9/64”, 5/32”, 3/16” Hex-Pins; #6, #8, #10, #12 Spanners; ¼” Hex

Category: Multi-Bit Screwdrivers

4-in-1 Electronics Screwdriver, Overall Length: 6.5", Blade Length: 2.8", Type: Multi-bit, Rotating Cap For Optimum Control

Category: Multi-Bit Screwdrivers

HVAC screwdriver with concealable tips and a pocket clip for easy pocket storage.Three different tips in one tool, includes #0 Phillips, 1/8-Inch (3.2 mm) Slotted, and a Schrader® bit. Rotating cap for optimum and precise control. Versatile interchangeable barrel has both a short and long side. Cushion-Grip handle for maximum comfort when working on small equipment. Steel bits with heat treated precision ground tips for greater strength. Corrosion-resistant anodized aluminum barrel.

Category: Multi-Bit Screwdrivers

11-In-1 Ratcheting Impact Rated Screwdriver And Nut Driver Includes 7 Screwdriver Bits And 4 Nut Drivers, Includes 11 Drive Ends: #1, #2 Phillips, 3/16-Inch, 1/4-Inch Slotted, #1, #2 Square, T25 Torx® And 1/4-Inch, 5/16-Inch, 3/8-Inch Power Nut Drivers, 1/2-Inch Standard Nut Driver, 1/4-Inch Quick-Connect On Power Nut Drivers To Easily Switch From Screwdriver Handle To Impact Driver, Collar Sets Ratchet Direction At Forward, Fixed And Reverse For Faster And Easier Driving, All Components Are Impact-Rated For Use With An Impact Driver (Not Included), Precision Machined Bit Tips Provide A Firm Hold And Reduce Cam-Out, Cushion-Grip™ Handle Allows For Greater Torque And Comfort, Torx® Is A Registered Trademark Of Acument Intellectual Properties, Llc

Category: Multi-Bit Screwdrivers

15-in-1 Multi-Bit Ratcheting Screwdriver, Ratcheting-Directions: Forward, Fixed, Reverse; On-Board Bit Storage, Nut Driver Sizes: 1/4'' (0.6 cm), Phillips Bits: #0, #1, #2, #3, Slotted Bits: 3/16'' (0.5 cm), 1/4'' (0.6 cm), Square Bits: #1, #2, Combo Bits: #1, #2, TORX® Bits: T10, T15, T20, T25

Category: Multi-Bit Screwdrivers

27-in-1 Multi-Bit Tamperproof Screwdriver, Nut Driver Sizes: 1/4'' (0.6 cm), Hex Bits: Tamperproof: 3/32'', 7/64'', 1/8'', 9/64'', 5/32'' (4 mm), 3/16'', 2 mm, 2.5 mm, 5 mm, 3 mm, TORX® Bits: Tamperproof: T7, T8, T10, T15, T20, T25, T27, T30, T40, Other Bits: TORQ-SET®: TS6, TS8, TS10; Tamperproof Spanner: SP4, SP6, SP8, SP10, Magnetic Bit Retention

Category: Multi-Bit Screwdrivers

All-in-1 Precision Screwdriver Set with Case, Includes 39 Bits, Magnets Inside Barrel To Better Retain Bits, As Well As Pick-Up And Hold Fasteners, Bits Will Accomodate Most Apple® Products

Category: Multi-Bit Screwdrivers

8-in-1 Multi-Bit Adjustable Length Stubby Screwdriver, Adjustable Length Screwdriver, Shaft Removes To Be Impact Driver Attachment, Nut Driver Sizes: 1/4'' (0.6 cm), Phillips Bits: #1, #2, #3, Slotted Bits: 3/16'' (0.5 cm), 1/4'' (0.6 cm), Square Bits: #1, #2, Magnetic Bit Retention

Category: Multi-Bit Screwdrivers

14-in-1 Multi-Bit Adjustable Length Screwdriver, Shaft Removes To Be Impact Driver Attachment, Nut Driver Sizes: 1/4'' (0.6 cm), Phillips Bits: #0, #1, #2, #3, Slotted Bits: 3/16'' (0.5 cm), 1/4'' (0.6 cm), Square Bits: #1, #2, Combo Bits: #2, TORX® Bits: T10, T15, T20 & T25, Magnetic Bit Retention

Category: Multi-Bit Screwdrivers